?? 1286411111.txt

?? 中文字庫液晶演示程序誰需要拿去
?? TXT
字號:
12864中文字庫液晶演示程序/19264/24064/320240/240128 
www.wjdkj.com//                    MS12864R 測試程序(串口) 
//***************************************************************************
//連線表: CPU=89C52  SystemClock=12Mhz                                      *
//CS=P3.0            SCLK=P3.1          SID=P3.2       Reset=RC in Board    *
//***************************************************************************
#include < ;reg52.h>
#include < ;stdlib.h>
#include < ;intrins.h>
#include < ;stdio.h>

sbit CS =P3^0 ;
sbit SCK=P3^1 ;
sbit SID=P3^2 ;
sbit Key=P3^4 ;

unsigned char code AC_TABLE[]={
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,      //第一行漢字位置
0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,      //第二行漢字位置
0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,      //第三行漢字位置
0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f,      //第四行漢字位置
} ;
unsigned char code str2[]="歡迎光臨sonsan!!" ;
unsigned char code str1[]="黃河遠上白云間，一片孤城萬仞山。羌笛何須怨楊柳，春風不度玉門關。" ;
unsigned char code bmp1[] ;

//串口發送一個字節
void SendByte(unsigned char Dbyte)
{
     unsigned char i ;
     for(i=0 ;i< ;8 ;i++)
     {
           SCK = 0 ;
           Dbyte=Dbyte< ;< ;1 ;      //左移一位
           SID = CY ;            //移出的位給SID
           SCK = 1 ;
           SCK = 0 ;
     }
}

//串口接收一個字節
//僅在讀取數據的時候用到
//而讀出的數據是一次只能讀出4bit的
unsigned char ReceiveByte(void)
{
     unsigned char i,temp1,temp2 ;
     temp1=temp2=0 ;
     for(i=0 ;i< ;8 ;i++)
     {
           temp1=temp1< ;< ;1 ;
           SCK = 0 ;
           SCK = 1 ;            
           SCK = 0 ;
           if(SID) temp1++ ;
     }
     for(i=0 ;i< ;8 ;i++)
     {
           temp2=temp2< ;< ;1 ;
           SCK = 0 ;
           SCK = 1 ;
           SCK = 0 ;
           if(SID) temp2++ ;
     }
     return ((0xf0&temp1)+(0x0f&temp2)) ;
}

void CheckBusy( void )
{
     do   SendByte(0xfc) ;      //11111,RW(1),RS(0),0
     while(0x80&ReceiveByte()) ;      //BF(.7)=1 Busy
}

void WriteCommand( unsigned char Cbyte )
{
     CS = 1 ;
     CheckBusy() ;
     SendByte(0xf8) ;            //11111,RW(0),RS(0),0
     SendByte(0xf0&Cbyte) ;      //高四位
     SendByte(0xf0&Cbyte< ;< ;4) ;//低四位(先執行< ;< ;)
     CS = 0 ;
}

void WriteData( unsigned char Dbyte )
{
     CS = 1 ;
     CheckBusy() ;
     SendByte(0xfa) ;            //11111,RW(0),RS(1),0
     SendByte(0xf0&Dbyte) ;      //高四位
     SendByte(0xf0&Dbyte< ;< ;4) ;//低四位(先執行< ;< ;)
     CS = 0 ;
}

unsigned char ReadData( void )
{
     CheckBusy() ;
     SendByte(0xfe) ;            //11111,RW(1),RS(1),0
     return ReceiveByte() ;
}

void Delay(unsigned int MS)
{
     unsigned char us,usn ;
     while(MS!=0)            //for 12M
           { usn = 2 ;
                 while(usn!=0)
                       {
                             us=0xf5 ;
                             while (us!=0){us-- ;} ;
                             usn-- ;
                       }
                 MS-- ;
           }
}

//維捷登測試架專用延時函數
void DelayKey(unsigned int Second , unsigned int MS100)
{                              //輸入精確到0.1S,是用","
     unsigned int i ;
     for(i=0 ;i< ;Second*100+MS100*10 ;i++)
     {
           if(Key==0)
           {
                 Delay(20) ;
                 while(Key==0) {Delay(20) ;}
                 break ;
           }
           else Delay(10) ;
     }
}

void LcmInit( void )
{
     WriteCommand(0x30) ;      //8BitMCU,基本指令集合
     WriteCommand(0x03) ;      //AC歸0,不改變DDRAM內容
     WriteCommand(0x0C) ;      //顯示ON,游標OFF,游標位反白OFF
     WriteCommand(0x01) ;      //清屏,AC歸0
     WriteCommand(0x06) ;      //寫入時,游標右移動
}

//文本區清RAM函數
void LcmClearTXT( void )
{
     unsigned char i ;
     WriteCommand(0x30) ;      //8BitMCU,基本指令集合
     WriteCommand(0x80) ;      //AC歸起始位
     for(i=0 ;i< ;64 ;i++)
        WriteData(0x20) ;
}

//圖形區和文本區顯示在兩個不同的RAM區
//圖形區清RAM函數
void LcmClearBMP( void )
{
     unsigned char i,j ;
     WriteCommand(0x34) ;      //8Bit擴充指令集,即使是36H也要寫兩次
     WriteCommand(0x36) ;      //繪圖ON,基本指令集里面36H不能開繪圖
     for(i=0 ;i< ;32 ;i++)            //12864實際為256x32
     {
           WriteCommand(0x80|i) ;      //行位置
           WriteCommand(0x80) ;      //列位置
           for(j=0 ;j< ;32 ;j++)            //256/8=32 byte
                WriteData(0) ;
     }
}

void PutStr(unsigned char row,unsigned char col,unsigned char *puts)
{
     WriteCommand(0x30) ;      //8BitMCU,基本指令集合
     WriteCommand(AC_TABLE[8*row+col]) ;      //起始位置
     while(*puts != '\0')      //判斷字符串是否顯示完畢
     {
           if(col==8)            //判斷換行
           {            //若不判斷,則自動從第一行到第三行
                 col=0 ;
                 row++ ;
           }
           if(row==4) row=0 ;      //一屏顯示完,回到屏左上角
           WriteCommand(AC_TABLE[8*row+col]) ;
           WriteData(*puts) ;      //一個漢字要寫兩次
           puts++ ;
           WriteData(*puts) ;
           puts++ ;
           col++ ;
     }
}

void PutBMP(unsigned char *puts)
{
     unsigned int x=0 ;
     unsigned char i,j ;
     WriteCommand(0x34) ;      //8Bit擴充指令集,即使是36H也要寫兩次
     WriteCommand(0x36) ;      //繪圖ON,基本指令集里面36H不能開繪圖
     for(i=0 ;i< ;32 ;i++)            //12864實際為256x32
     {
           WriteCommand(0x80|i) ;      //行位置
           WriteCommand(0x80) ;      //列位置
           for(j=0 ;j< ;32 ;j++)      //256/8=32 byte
           {            //列位置每行自動增加
                 WriteData(puts[x]) ;
                 x++ ;
           }
     }
}

//維捷登測試用點陣顯示
void DisplayDots(unsigned char DotByte)
{
     unsigned char i,j ;
     WriteCommand(0x34) ;      //8Bit擴充指令集,即使是36H也要寫兩次
     WriteCommand(0x36) ;      //繪圖ON,基本指令集里面36H不能開繪圖
     for(i=0 ;i< ;32 ;i++)            //12864實際為256x32
     {
           WriteCommand(0x80|i) ;      //行位置
           WriteCommand(0x80) ;      //列位置
           for(j=0 ;j< ;32 ;j++)      //256/8=32 byte
           {            //列位置每行自動增加
                 WriteData(DotByte) ;                  
           }
           DotByte=~DotByte ;
     }
}

void main( void )
{
     Delay(100) ;      //等待復位
     LcmInit() ;
     LcmClearTXT() ;
     LcmClearBMP() ;
     while(1)
     {
           LcmClearTXT() ;
           PutBMP(bmp1) ;
           DelayKey(1,5) ;
           
           DisplayDots(0x55) ;
           DelayKey(1,5) ;
           
           LcmClearBMP() ;
           PutStr(0,0,str1) ;
           DelayKey(1,5) ;
                       
           LcmClearTXT() ;
           DisplayDots(0xaa) ;
           DelayKey(1,5) ;
     }
}

unsigned char code bmp1[]={
//********************************************************//
//***** 轉換的文件：E:\!Program\!BmpSample\25632.bmp
//***** 源圖形寬度 * 高度：256 * 32
//***** 調整后寬度 * 高度：256 * 32
//***** 字模格式：橫向取模,冗余模式,字節正序,正色取模,
//***** 點陣轉換時間：2005/03/ 2   16:4:32
//***** 位圖點陣占用1024字節
//********************************************************//

0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x80,0x00,0x0F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x3F,0xC0,0x00,0x07,0x07,0x00,0x04,0x01,0x00,0x00,0x38,0x60,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x78,0xE0,0x00,0x3F,0x83,0x80,0x06,0x03,0x80,0x00,0x1C,0x70,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x02,0x38,0x70,0x00,0xFF,0x07,0x80,0x06,0x39,0x80,0x00,0x1F,0x70,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x02,0x1C,0x30,0x00,0x7C,0x0E,0x00,0x06,0x19,0xC0,0x00,0x1F,0x80,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x02,0x1C,0x30,0x00,0x3E,0x1C,0x00,0x06,0x1F,0xC0,0x00,0x7F,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x03,0x3E,0x30,0x00,0x62,0x1A,0x00,0x0F,0x79,0x00,0x03,0xFE,0x00,0x00,0x01,
0x80,0x00,0x00,0x60,0x0F,0x00,0x3F,0x00,0x00,0x00,0x3C,0x00,0xC0,0x00,0x00,0x01,
0x80,0x07,0x76,0x18,0x00,0xC3,0xC1,0x00,0x1F,0xFB,0x00,0x03,0xFE,0x00,0x00,0x01,
0x80,0x00,0x01,0xE0,0x3F,0xC0,0xF1,0xC0,0x00,0x00,0xF0,0x01,0xC0,0x00,0x00,0x01,
0x80,0x07,0x6E,0x18,0x00,0xCF,0xC1,0x80,0x7E,0x3F,0x80,0x01,0xE2,0x00,0x00,0x01,
0x80,0x00,0x07,0xE0,0x7F,0xE0,0xE0,0xE0,0x00,0x03,0xC0,0x03,0xC0,0x00,0x00,0x01,
0x80,0x07,0x7F,0x98,0x00,0xFE,0x83,0x81,0xFC,0x1E,0xC0,0x00,0x83,0x00,0x00,0x01,
0x80,0x00,0x0F,0xE0,0x63,0xE1,0xE0,0xE0,0x00,0x07,0x00,0x03,0xC0,0x00,0x00,0x01,
0x80,0x06,0xFF,0xD8,0x01,0xFA,0x87,0x00,0xFD,0xF8,0xC0,0x01,0x73,0x00,0x00,0x01,
0x80,0x00,0x01,0xE0,0xC1,0xE1,0xE0,0xE0,0x00,0x0F,0x00,0x07,0xC0,0x00,0x00,0x01,
0x80,0x0F,0xD9,0xD8,0x03,0xE3,0x0E,0x80,0xFE,0x7E,0xC0,0x03,0xF9,0x80,0x00,0x01,
0x80,0x00,0x01,0xE0,0x01,0xE1,0xF0,0xE0,0x00,0x1E,0x00,0x0B,0xC0,0x00,0x00,0x01,
0x80,0x0D,0xB8,0x18,0x1F,0xC3,0x08,0xC0,0x0E,0x6D,0x80,0x03,0xF1,0x80,0x00,0x01,
0x80,0x00,0x01,0xE0,0x01,0xE0,0xFD,0xC7,0xEF,0x9E,0x00,0x13,0xC0,0x00,0x00,0x01,
0x80,0x0D,0xFE,0x18,0x0F,0xC2,0x10,0xE0,0x1C,0x3F,0x00,0x03,0xE0,0xC0,0x00,0x01,
0x80,0x00,0x01,0xE0,0x01,0xC0,0xFF,0x83,0xC6,0x1F,0xE0,0x13,0xC0,0x00,0x00,0x01,
0x80,0x0D,0xCE,0x18,0x06,0xC2,0x01,0xC0,0x38,0x3E,0x00,0x00,0xE8,0xC0,0x00,0x01,
0x80,0x00,0x01,0xE0,0x01,0x80,0x3F,0x81,0xE4,0x3C,0x78,0x23,0xC0,0x00,0x00,0x01,
0x80,0x0C,0x4C,0x18,0x00,0xC2,0x03,0x80,0x78,0x1F,0xF0,0x00,0xFC,0x60,0x00,0x01,
0x80,0x00,0x01,0xE0,0x03,0x80,0x3F,0xC1,0xE8,0x3C,0x78,0x43,0xC0,0x00,0x00,0x01,
0x80,0x0C,0x5E,0x18,0x00,0xC2,0x07,0x00,0x68,0x3F,0xF8,0x03,0xFC,0x22,0x00,0x01,
0x80,0x00,0x01,0xE0,0x03,0x00,0x6F,0xC0,0xF0,0x3C,0x3C,0x83,0xC0,0x00,0x00,0x01,
0x80,0x06,0x3F,0x38,0x01,0x82,0x0E,0x00,0x09,0xF8,0x00,0x03,0xC0,0x32,0x00,0x01,
0x80,0x00,0x01,0xE0,0x06,0x00,0xC3,0xE0,0x78,0x3C,0x3C,0xFF,0xF0,0x00,0x00,0x01,
0x80,0x07,0x10,0x38,0x00,0x82,0x1C,0x00,0x0B,0x99,0xC0,0x03,0x00,0x1A,0x00,0x01,
0x80,0x00,0x01,0xE0,0x0C,0x11,0xC3,0xE0,0x78,0x3C,0x3C,0xFF,0xF0,0x00,0x00,0x01,
0x80,0x03,0xFF,0xF0,0x00,0x02,0x38,0x00,0x08,0x30,0xE0,0x02,0x00,0x1E,0x00,0x01,
0x80,0x00,0x01,0xE0,0x08,0x11,0xC1,0xE0,0x7C,0x3C,0x3C,0xFF,0xF0,0x00,0x00,0x01,
0x80,0x01,0xEF,0xF0,0x00,0x00,0xE0,0x00,0x08,0xE0,0x60,0x00,0x00,0x0E,0x00,0x01,
0x80,0x00,0x01,0xE0,0x1F,0xF1,0xC1,0xE0,0xBC,0x1C,0x3C,0x03,0xC0,0x00,0x00,0x01,
0x80,0x00,0x03,0xE0,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x07,0x00,0x01,
0x80,0x00,0x01,0xE0,0x3F,0xE1,0xC1,0xC0,0x9E,0x1E,0x38,0x03,0xC0,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,
0x80,0x00,0x01,0xF0,0x7F,0xE0,0xE3,0x83,0x1F,0x0E,0x70,0x03,0xC0,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x0F,0xFC,0xFF,0xE0,0x3F,0x07,0xDF,0x83,0xE0,0x03,0xC0,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x00,0x00,0x01,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
} ;
?? 文件大小 4 K
?? 上傳用戶 siclj
?? 所屬分類嵌入式/單片機編程
??? 相關標簽

#字庫 #液晶 #程序
?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

?? 1286411111.txt

?? 快捷鍵說明
