/* *  drivers/mtd/nand.c * *  Overview: *   This is the generic MTD driver for NAND flash devices. It should be *   capable of working with almost all NAND chips currently available. *   Basic support for AG-AND chips is provided. * *	Additional technical information is available on *	http://www.linux-mtd.infradead.org/tech/nand.html * *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * 		  2002 Thomas Gleixner (tglx@linutronix.de) * *  02-08-2004  tglx: support for strange chips, which cannot auto increment *		pages on read / read_oob * *  03-17-2004  tglx: Check ready before auto increment check. Simon Bayes *		pointed this out, as he marked an auto increment capable chip *		as NOAUTOINCR in the board driver. *		Make reads over block boundaries work too * *  04-14-2004	tglx: first working version for 2k page size chips * *  05-19-2004  tglx: Basic support for Renesas AG-AND chips * *  09-24-2004  tglx: add support for hardware controllers (e.g. ECC) shared *		among multiple independend devices. Suggestions and initial patch *		from Ben Dooks <ben-mtd@fluff.org> * * Credits: *	David Woodhouse for adding multichip support * *	Aleph One Ltd. and Toby Churchill Ltd. for supporting the *	rework for 2K page size chips * * TODO: *	Enable cached programming for 2k page size chips *	Check, if mtd->ecctype should be set to MTD_ECC_HW *	if we have HW ecc support. *	The AG-AND chips have nice features for speed improvement, *	which are not supported yet. Read / program 4 pages in one go. * * $Id: nand_base.c,v 1.126 2004/12/13 11:22:25 lavinen Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * *//* XXX U-BOOT XXX */#if 0#include <linux/delay.h>#include <linux/errno.h>#include <linux/sched.h>#include <linux/slab.h>#include <linux/types.h>#include <linux/mtd/mtd.h>#include <linux/mtd/nand.h>#include <linux/mtd/nand_ecc.h>#include <linux/mtd/compatmac.h>#include <linux/interrupt.h>#include <linux/bitops.h>#include <asm/io.h>#ifdef CONFIG_MTD_PARTITIONS#include <linux/mtd/partitions.h>#endif#endif#include <common.h>#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY)#include <malloc.h>#include <watchdog.h>#include <linux/mtd/compat.h>#include <linux/mtd/mtd.h>#include <linux/mtd/nand.h>#include <linux/mtd/nand_ecc.h>#include <asm/io.h>#include <asm/errno.h>#ifdef CONFIG_JFFS2_NAND#include <jffs2/jffs2.h>#endif/* Define default oob placement schemes for large and small page devices */static struct nand_oobinfo nand_oob_8 = {	.useecc = MTD_NANDECC_AUTOPLACE,	.eccbytes = 3,	.eccpos = {0, 1, 2},	.oobfree = { {3, 2}, {6, 2} }};static struct nand_oobinfo nand_oob_16 = {	.useecc = MTD_NANDECC_AUTOPLACE,	.eccbytes = 6,	.eccpos = {0, 1, 2, 3, 6, 7},	.oobfree = { {8, 8} }};static struct nand_oobinfo nand_oob_64 = {	.useecc = MTD_NANDECC_AUTOPLACE,	.eccbytes = 24,	.eccpos = {		40, 41, 42, 43, 44, 45, 46, 47,		48, 49, 50, 51, 52, 53, 54, 55,		56, 57, 58, 59, 60, 61, 62, 63},	.oobfree = { {2, 38} }};/* This is used for padding purposes in nand_write_oob */static u_char ffchars[] = {	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,};/* * NAND low-level MTD interface functions */static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,			  size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,			   size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);/* XXX U-BOOT XXX */#if 0static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs,			unsigned long count, loff_t to, size_t * retlen);static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,			unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);#endifstatic int nand_erase (struct mtd_info *mtd, struct erase_info *instr);static void nand_sync (struct mtd_info *mtd);/* Some internal functions */static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,		struct nand_oobinfo *oobsel, int mode);#ifdef CONFIG_MTD_NAND_VERIFY_WRITEstatic int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,	u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode);#else#define nand_verify_pages(...) (0)#endifstatic void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state);/** * nand_release_device - [GENERIC] release chip * @mtd:	MTD device structure * * Deselect, release chip lock and wake up anyone waiting on the device *//* XXX U-BOOT XXX */#if 0static void nand_release_device (struct mtd_info *mtd){	struct nand_chip *this = mtd->priv;	/* De-select the NAND device */	this->select_chip(mtd, -1);	/* Do we have a hardware controller ? */	if (this->controller) {		spin_lock(&this->controller->lock);		this->controller->active = NULL;		spin_unlock(&this->controller->lock);	}	/* Release the chip */	spin_lock (&this->chip_lock);	this->state = FL_READY;	wake_up (&this->wq);	spin_unlock (&this->chip_lock);}#elsestatic void nand_release_device (struct mtd_info *mtd){	struct nand_chip *this = mtd->priv;	this->select_chip(mtd, -1);	/* De-select the NAND device */}#endif/** * nand_read_byte - [DEFAULT] read one byte from the chip * @mtd:	MTD device structure * * Default read function for 8bit buswith */static u_char nand_read_byte(struct mtd_info *mtd){	struct nand_chip *this = mtd->priv;	return readb(this->IO_ADDR_R);}/** * nand_write_byte - [DEFAULT] write one byte to the chip * @mtd:	MTD device structure * @byte:	pointer to data byte to write * * Default write function for 8it buswith */static void nand_write_byte(struct mtd_info *mtd, u_char byte){	struct nand_chip *this = mtd->priv;	writeb(byte, this->IO_ADDR_W);}/** * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip * @mtd:	MTD device structure * * Default read function for 16bit buswith with * endianess conversion */static u_char nand_read_byte16(struct mtd_info *mtd){	struct nand_chip *this = mtd->priv;	return (u_char) cpu_to_le16(readw(this->IO_ADDR_R));}/** * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip * @mtd:	MTD device structure * @byte:	pointer to data byte to write * * Default write function for 16bit buswith with * endianess conversion */static void nand_write_byte16(struct mtd_info *mtd, u_char byte){	struct nand_chip *this = mtd->priv;	writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);}/** * nand_read_word - [DEFAULT] read one word from the chip * @mtd:	MTD device structure * * Default read function for 16bit buswith without * endianess conversion */static u16 nand_read_word(struct mtd_info *mtd){	struct nand_chip *this = mtd->priv;	return readw(this->IO_ADDR_R);}/** * nand_write_word - [DEFAULT] write one word to the chip * @mtd:	MTD device structure * @word:	data word to write * * Default write function for 16bit buswith without * endianess conversion */static void nand_write_word(struct mtd_info *mtd, u16 word){	struct nand_chip *this = mtd->priv;	writew(word, this->IO_ADDR_W);}/** * nand_select_chip - [DEFAULT] control CE line * @mtd:	MTD device structure * @chip:	chipnumber to select, -1 for deselect * * Default select function for 1 chip devices. */static void nand_select_chip(struct mtd_info *mtd, int chip){	struct nand_chip *this = mtd->priv;	switch(chip) {	case -1:		this->hwcontrol(mtd, NAND_CTL_CLRNCE);		break;	case 0:		this->hwcontrol(mtd, NAND_CTL_SETNCE);		break;	default:		BUG();	}}/** * nand_write_buf - [DEFAULT] write buffer to chip * @mtd:	MTD device structure * @buf:	data buffer * @len:	number of bytes to write * * Default write function for 8bit buswith */static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len){	int i;	struct nand_chip *this = mtd->priv;	for (i=0; i<len; i++)		writeb(buf[i], this->IO_ADDR_W);}/** * nand_read_buf - [DEFAULT] read chip data into buffer * @mtd:	MTD device structure * @buf:	buffer to store date * @len:	number of bytes to read * * Default read function for 8bit buswith */static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len){	int i;	struct nand_chip *this = mtd->priv;	for (i=0; i<len; i++)		buf[i] = readb(this->IO_ADDR_R);}/** * nand_verify_buf - [DEFAULT] Verify chip data against buffer * @mtd:	MTD device structure * @buf:	buffer containing the data to compare * @len:	number of bytes to compare * * Default verify function for 8bit buswith */static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len){	int i;	struct nand_chip *this = mtd->priv;	for (i=0; i<len; i++)		if (buf[i] != readb(this->IO_ADDR_R))			return -EFAULT;	return 0;}/** * nand_write_buf16 - [DEFAULT] write buffer to chip * @mtd:	MTD device structure * @buf:	data buffer * @len:	number of bytes to write * * Default write function for 16bit buswith */static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len){	int i;	struct nand_chip *this = mtd->priv;	u16 *p = (u16 *) buf;	len >>= 1;	for (i=0; i<len; i++)		writew(p[i], this->IO_ADDR_W);}/** * nand_read_buf16 - [DEFAULT] read chip data into buffer * @mtd:	MTD device structure * @buf:	buffer to store date * @len:	number of bytes to read * * Default read function for 16bit buswith */static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len){	int i;	struct nand_chip *this = mtd->priv;	u16 *p = (u16 *) buf;	len >>= 1;	for (i=0; i<len; i++)		p[i] = readw(this->IO_ADDR_R);}/** * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer * @mtd:	MTD device structure * @buf:	buffer containing the data to compare * @len:	number of bytes to compare * * Default verify function for 16bit buswith */static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len){	int i;	struct nand_chip *this = mtd->priv;	u16 *p = (u16 *) buf;	len >>= 1;	for (i=0; i<len; i++)		if (p[i] != readw(this->IO_ADDR_R))			return -EFAULT;	return 0;}/** * nand_block_bad - [DEFAULT] Read bad block marker from the chip * @mtd:	MTD device structure * @ofs:	offset from device start * @getchip:	0, if the chip is already selected * * Check, if the block is bad. */static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip){	int page, chipnr, res = 0;	struct nand_chip *this = mtd->priv;	u16 bad;	if (getchip) {		page = (int)(ofs >> this->page_shift);		chipnr = (int)(ofs >> this->chip_shift);		/* Grab the lock and see if the device is available */		nand_get_device (this, mtd, FL_READING);		/* Select the NAND device */		this->select_chip(mtd, chipnr);	} else		page = (int) ofs;	if (this->options & NAND_BUSWIDTH_16) {		this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);		bad = cpu_to_le16(this->read_word(mtd));		if (this->badblockpos & 0x1)			bad >>= 1;		if ((bad & 0xFF) != 0xff)			res = 1;	} else {		this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask);		if (this->read_byte(mtd) != 0xff)			res = 1;	}	if (getchip) {		/* Deselect and wake up anyone waiting on the device */		nand_release_device(mtd);	}	return res;