?? interrupts.c
字號:
/* * (C) Copyright 2003 * Texas Instruments <www.ti.com> * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroeger@sysgo.de> * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Alex Zuepke <azu@sysgo.de> * * (C) Copyright 2002-2004 * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> * * (C) Copyright 2004 * Philippe Robin, ARM Ltd. <philippe.robin@arm.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <asm/proc-armv/ptrace.h>#ifndef CONFIG_INTEGRATOR/* Only to be used for integrator/AP or /CP *//* Allows U-Boot to be used with any ARM supplied core module (CM), * provided the ARM boot monitor, or similar software, * runs first to set up the platform e.g. map writeable memory to 0x00000000 * - see Integrator User Guides * Versatile has a supported cpu - arm926ejs * Some integrator CMs cpus are supported * CM926EJ-S, CM946E-S * For platforms with supported cpus U-Boot can be used as the sole boot * monitor/loader - it will configure the platform itself * Also U-Boot may be faster/smaller in those cases since specific * qualities of the cpu and/or CM can be used e.g i and/or d caches etc. */#endifextern void reset_cpu(ulong addr);#ifdef CONFIG_USE_IRQ/* enable IRQ interrupts */void enable_interrupts (void){ unsigned long temp; __asm__ __volatile__("mrs %0, cpsr\n" "bic %0, %0, #0x80\n" "msr cpsr_c, %0" : "=r" (temp) : : "memory");}/* * disable IRQ/FIQ interrupts * returns true if interrupts had been enabled before we disabled them */int disable_interrupts (void){ unsigned long old,temp; __asm__ __volatile__("mrs %0, cpsr\n" "orr %1, %0, #0xc0\n" "msr cpsr_c, %1" : "=r" (old), "=r" (temp) : : "memory"); return (old & 0x80) == 0;}#elsevoid enable_interrupts (void){ return;}int disable_interrupts (void){ return 0;}#endifvoid bad_mode (void){ panic ("Resetting CPU ...\n"); reset_cpu (0);}void show_regs (struct pt_regs *regs){ unsigned long flags; const char *processor_modes[] = { "USER_26", "FIQ_26", "IRQ_26", "SVC_26", "UK4_26", "UK5_26", "UK6_26", "UK7_26", "UK8_26", "UK9_26", "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26", "USER_32", "FIQ_32", "IRQ_32", "SVC_32", "UK4_32", "UK5_32", "UK6_32", "ABT_32", "UK8_32", "UK9_32", "UK10_32", "UND_32", "UK12_32", "UK13_32", "UK14_32", "SYS_32", }; flags = condition_codes (regs); printf ("pc : [<%08lx>] lr : [<%08lx>]\n" "sp : %08lx ip : %08lx fp : %08lx\n", instruction_pointer (regs), regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp); printf ("r10: %08lx r9 : %08lx r8 : %08lx\n", regs->ARM_r10, regs->ARM_r9, regs->ARM_r8); printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4); printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0); printf ("Flags: %c%c%c%c", flags & CC_N_BIT ? 'N' : 'n', flags & CC_Z_BIT ? 'Z' : 'z', flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v'); printf (" IRQs %s FIQs %s Mode %s%s\n", interrupts_enabled (regs) ? "on" : "off", fast_interrupts_enabled (regs) ? "on" : "off", processor_modes[processor_mode (regs)], thumb_mode (regs) ? " (T)" : "");}void do_undefined_instruction (struct pt_regs *pt_regs){ printf ("undefined instruction\n"); show_regs (pt_regs); bad_mode ();}void do_software_interrupt (struct pt_regs *pt_regs){ printf ("software interrupt\n"); show_regs (pt_regs); bad_mode ();}void do_prefetch_abort (struct pt_regs *pt_regs){ printf ("prefetch abort\n"); show_regs (pt_regs); bad_mode ();}void do_data_abort (struct pt_regs *pt_regs){ printf ("data abort\n"); show_regs (pt_regs); bad_mode ();}void do_not_used (struct pt_regs *pt_regs){ printf ("not used\n"); show_regs (pt_regs); bad_mode ();}void do_fiq (struct pt_regs *pt_regs){ printf ("fast interrupt request\n"); show_regs (pt_regs); bad_mode ();}void do_irq (struct pt_regs *pt_regs){ printf ("interrupt request\n"); show_regs (pt_regs); bad_mode ();}/* The timer functionality is supplied by the Integrator board *//* - see board/integrator<>.c */
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -