?? test7279.lst
字號:
C51 COMPILER V6.23a TEST7279 12/19/2002 16:43:11 PAGE 1
C51 COMPILER V6.23a, COMPILATION OF MODULE TEST7279
OBJECT MODULE PLACED IN Test7279.OBJ
COMPILER INVOKED BY: C:\KEIL\C51\BIN\C51.EXE Test7279.c DB OE
stmt level source
1 #include "c8051f020.h"
2 #include <intrins.h>
3
4 sbit HD7279_DAT=P1^7;
5 sbit HD7279_CLK=P1^6;
6
7 #define NOSELECT7279 P5 |= 0x80 //SPICS4(P57)=1
8 #define SELECT7279 P5 &= ~(0x80) //SPICS4(P57)=0;
9 #define Set7279DAT HD7279_DAT=1
10 #define Clr7279DAT HD7279_DAT=0
11 #define Set7279CLK HD7279_CLK=1
12 #define Clr7279CLK HD7279_CLK=0
13
14 // HD7279測試/演示程序
15
16 // I/O口初始化
17
18 void Delay1ms(unsigned char T);
19 void Delay1s(unsigned char T);
20 void Delay1us(unsigned char T);
21
22 void Send7279Byte(unsigned char ch)
23 {
24 1 char i;
25 1 SELECT7279; //置CS低電平
26 1 Delay1us(50); //延時50μ
27 1
28 1 for (i=0;i<8;i++)
29 1 {
30 2 if (ch&0x80) //輸出7位到HD7279A的DATA端
31 2 {
32 3 Set7279DAT;
33 3 }
34 2 else
35 2 {
36 3 Clr7279DAT;
37 3 }
38 2 Set7279CLK; //置CLK高電平
39 2 ch=ch<<1; //待發數據左移
40 2 Delay1us(8); //延時8μ
41 2 Clr7279CLK; //置CLK低電平
42 2 Delay1us(8); //延時50μ
43 2 }
44 1 Clr7279DAT; //發送完畢，DATA端置低，返回
45 1 }
46 unsigned char Receive7279Byte(void)
47 {
48 1 unsigned char i,ch;
49 1 ch=0;
50 1 Set7279DAT; //DATA端置為高電平，輸入狀態
51 1 Delay1us(50); //延時50μ
52 1 for (i=0;i<8;i++)
53 1 {
54 2 Set7279CLK; //置CLK高電平
55 2 Delay1us(8); //延時8μ
C51 COMPILER V6.23a TEST7279 12/19/2002 16:43:11 PAGE 2
56 2 ch=ch<<1; //接收數據左移1位
57 2 if (HD7279_DAT)
58 2 ch+=1; //接收1位數據
59 2 Clr7279CLK; //置CLK低電平
60 2 Delay1us(8); //延時8μ
61 2 }
62 1 Clr7279DAT; //接收完畢，DATA端重新置成低電平(輸出狀態)
63 1 return ch;
64 1 }
65
66 void FlashLED(unsigned char No)
67 {
68 1 char i;
69 1 Send7279Byte(0x88); //發閃爍指令
70 1 i=0x1;
71 1 while (No)
72 1 {
73 2 i=i<<1;
74 2 No--;
75 2 }
76 1 Send7279Byte(~i); //1閃爍
77 1 NOSELECT7279; //置CS高電平
78 1 }
79
80 /*
81 void BlankLED(unsigned char ch)
82 {
83 Send7279Byte(0x98); //發消隱指令
84 Send7279Byte(ch); //1-顯示 0-消隱
85 NOSELECT7279; //置CS高電平
86 }
87 */
88
89 void MoveLeft(void)
90 {
91 1 Send7279Byte(0xA1); //發左移指令
92 1 NOSELECT7279; //置CS高電平
93 1 }
94
95 void MoveRight(void)
96 {
97 1 Send7279Byte(0xA0); //發右移指令
98 1 NOSELECT7279; //置CS高電平
99 1 }
100
101 unsigned char code BdSeg[]={
102 0x7e,0x30,0x6d,0x79, // 0 1 2 3
103 0x33,0x5b,0x5f,0x70, // 4 5 6 7
104 0x7f,0x7b,0x77,0x1f, // 8 9 a b
105 0x4e,0x3d,0x4f,0x47, // c d e f
106 0x00,0x01};
107 /*
108 ; b6
109 ; ----
110 ; b1| b0 |b5
111 ; ---- small
112 ; b2| b3 |b4
113 ; ---- .b7
114 */
115 void DispLED(char *DispBuf,char ShowDot)//ShowDot 顯示小數點位
116 {
117 1 char i,ch;
C51 COMPILER V6.23a TEST7279 12/19/2002 16:43:11 PAGE 3
118 1 ShowDot--;
119 1 for (i=0;i<6;i++)
120 1 {
121 2 ch=DispBuf[i];
122 2 if ((ch>='a') && (ch<='f'))
123 2 {
124 3 ch-='a';ch+=0xa;
125 3 }
126 2 if ((ch>='A') && (ch<='F'))
127 2 {
128 3 ch-='A';ch+=0xa;
129 3 }
130 2 Send7279Byte(0x90+5-i); //不譯碼
131 2 if (ch==' ')
132 2 Send7279Byte(0x00);
133 2 else
134 2 if (ch=='-')
135 2 Send7279Byte(0x01);
136 2 else
137 2 {
138 3 if (ShowDot==i)
139 3 Send7279Byte(0x80|BdSeg[ch&0x0f]);
140 3 else
141 3 Send7279Byte(BdSeg[ch&0x0f]);
142 3 }
143 2 }
144 1 NOSELECT7279; //置CS高電平
145 1 }
146
147 char GetKeyValue(void)
148 {
149 1 char KeyValue;
150 1 if (CPT1CN&0x40) return -1; //無鍵按下
151 1 Send7279Byte(0x15); //發讀鍵盤指令
152 1 KeyValue=Receive7279Byte();
153 1 NOSELECT7279; //置CS高電平
154 1 return KeyValue;
155 1 }
156
157 void WaitKeyOff(void)
158 {
159 1 while (!(CPT1CN&0x40));
160 1 }
161
162 void Test7279(bit LoopFlag)
163 {
164 1 char i,KeyValue;
165 1 Delay1ms(25); //等待25ms復位時間
166 1 Send7279Byte(0xA4); //發復位指令
167 1 NOSELECT7279; //置CS高電平
168 1 if (LoopFlag==0) return;
169 1 DispLED("123456",0); //顯示123456
170 1 for (i=0;i<8;i++)
171 1 {
172 2 Delay1s(1);
173 2 MoveLeft();
174 2 }
175 1
176 1 DispLED("123456",0); //顯示123456
177 1 DispLED("7890AB",2); //顯示123456
178 1 DispLED("CDEF -",3); //顯示123456
179 1
C51 COMPILER V6.23a TEST7279 12/19/2002 16:43:11 PAGE 4
180 1 for (i=0;i<6;i++)
181 1 {
182 2 Delay1s(1);
183 2 MoveRight();
184 2 }
185 1
186 1 DispLED("F 1",1); //顯示123456
187 1
188 1 FlashLED(0); //第一位閃爍
189 1 Delay1s(1);
190 1 FlashLED(1); //第二位閃爍
191 1 Delay1s(1);
192 1 FlashLED(8); //關閃爍
193 1
194 1 //BlankLED(0x23); //注意:執行消隱后,鍵盤輸入中斷口不能恢復.
195 1
196 1 for (;;)
197 1 {
198 2 KeyValue=GetKeyValue();
199 2 if(KeyValue!=-1)
200 2 {
201 3 Send7279Byte(0xC8); //發送鍵碼值，按方式1譯碼下載顯示
202 3 Send7279Byte(KeyValue%16);
203 3 NOSELECT7279; //置CS高電平
204 3 WaitKeyOff();
205 3 }
206 2 }
207 1 }
MODULE INFORMATION: STATIC OVERLAYABLE
CODE SIZE = 544 ----
CONSTANT SIZE = 46 ----
XDATA SIZE = ---- ----
PDATA SIZE = ---- ----
DATA SIZE = ---- 13
IDATA SIZE = ---- ----
BIT SIZE = ---- 1
END OF MODULE INFORMATION.
C51 COMPILATION COMPLETE. 0 WARNING(S), 0 ERROR(S)
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -