system.  The unit is +\-cent.  The format is similar to \fBrate=\fP..TP.BI tremfc= num[,...]Sets the instrument's depth of changing cutoff frequency according totremolo.  It can express the so\-called glowl effect.  The unit, etc.are same as \fBtrempitch=\fP..TP.BI modpitch= num[,...]Sets the instrument's depth of changing pitch according to modulationenvelope.  It can temporarily express raising pitch only for theattack stage.  The unit, etc. are same as \fBtrempitch=\fP..TP.BI modfc= num[,...]Sets the instrument's depth of changing cutoff frequency according tomodulation envelope.  The unit, etc. are same as \fBtrempitch=\fP..TP.BI fc= num[,...]Sets the instrument's standard of cutoff frequency.  The unit is Hz.The format is similar to \fBrate=\fP..TP.BI q= num[,...]Sets the instrument's Q (resonance).  The unit is cB.  The format issimilar to \fBrate=\fP..TP.BI fckeyf= numSets the instrument's filter key follow.  Based on \fBnote=60\fP, itchange cutoff frequency according to note.  The unit is +\-cent/key.For example, \fBfckeyf=100\fP means that it changes same as pitch..TP.BI fcvelf= numSets the instrument's filter velocity follow.  Based on\fBvelocity=127\fP, it changes cutoff frequency according to velocity.The unit is +\-cent.  In SoundFont, \fB\-2400\fP is set up as acharacteristic value..TP.BI qvelf= numSets the instrument's resonance velocity follow.  Based on\fBvelocity=0\fP, it changes resonance according to velocity.  Theunit is +\-cB..RE.TP.BI "default " fileWhen MIDI program appears, which is not mapped to instrument file,this file is pronounced as a substitute..TP.BI "map " "MapID1 from\-bank from\-prog to\-bank to\-prog"The existing tone is assigned as a tone of GS/XG each map.  \fBgm2\fP,\fBsc55\fP, \fBsc88\fP, \fBsc88pro\fP, \fBsc8850, \fP\fBxg\fP and\fBxgsfx64\fP can be specified to be \fIMapID1\fP..TP.BI "map " "MapID2 from\-drumset from\-keynote to\-drumset to\-keynote"The existing drum is assigned as a drum of GS/XG each map.\fBgm2drum\fP, \fBsc55drum\fP, \fBsc88drum\fP, \fBsc88prodrum\fP,\fBsc8850drum\fP, \fBxgdrum\fP and \fBxgsfx126\fP can be specified tobe \fIMapID2\fP..TP.BI "soundfont " "file [options]"Read the whole SoundFont.  \fIoptions\fP may be any of the following:.RS.TP.BI order= numberSets the order of searching for instrument.  When \fBorder=0\fP, firstread SoundFont, and then search for insufficient samples in GUS/patch.When \fBorder=1\fP, after reading GUS/patch, search for SoundFont..TP.BI amp= amplificationSets the amplification of the whole SoundFont as \fIamplification\fP%.If the value is not specified, it is set by \fB100\fP%..TP.BI cutoff= numberSpecifies whether LPF in SoundFont is enable (\fB1\fP) or disable(\fB0\fP).  If the value is not specified, it is considered to beenable..TP.BI reso= numberSpecifies whether resonance in SoundFont is enable (\fB1\fP) or disable(\fB0\fP).  If the value is not specified, it is considered to beenable..TP.B removeCancels the target SoundFont from the memory..RE.TP.BI "font exclude " "bank [prog [key]]"Suppresses searching for SoundFont of \fIbank\fP, \fIprog\fP.If the sample is drumset, bank is \fB128\fP, drumset is \fIprog\fP,keynum is \fIkey\fP..TP.BI "font order " "number bank [prog [key]]"Sets the order of searching for instrument individually.  The format issame as \fBfont exclude\fP..LPThe following statements are available only latest \fBTiMidity++\fP..TP.BI "#extension altassign " "program1 program2 ..."Sets the alternate assign for drum set.  For example, if you want topronounce Hi\-Hat cymbals (note number \fB42\fP, \fB44\fP and\fB46\fP) in the \fBdrumset 0\fP exclusively to each others, specify:.spdrumset 0.braltassign 42 44 46.spNote that alternate assign of \fBdrumset 0\fP is used by default..TP.BI "#extension comm " "program comment"Specifies the comment \fIcomment\fP for the tone number \fIprogram\fP.These comments are displayed in the indicator line when\fBTiMidity++\fP is booted with option \fB\-int\fP, \fB\-iTt\fP..TP.BI "#extension timeout " "program second"Specifies the time\-out value of the \fIprogram\fP.  If any notesplayed with the tone number \fIprogram\fP are suspended more than\fIsecond\fP seconds, \fBTiMidity++\fP kills the notes..TP.BI "#extension copydrumset " drumsetCopies all settings of the \fIdrumset\fP to the current drumset..TP.BI "#extension copybank " bankCopies all settings of the \fIbank\fP to the current bank..TP.BI "#extension copymap " "to\-MapID from\-MapID"Copies all settings of the banks defined for the map \fIfrom\-MapID\fPto the map \fIto\-MapID\fP..TP.BI "#extension HTTPproxy " hostname:portSpecifies the proxy of the HTTP protocol.  \fIhostname\fP and\fIport\fB are of the proxy host's..TP.BI "#extension FTPproxy " hostname:portSpecifies the proxy of the FTP protocol.  Same as HTTP..TP.BI "#extension mailaddr " your\-mail\-addressSpecifies user's mail address.  This address is sent to the FTPserver if \fBTiMidity++\fP access any file via FTP..TP.BI "#extension opt " optionSets the value of boot\-time options..TP.BI "#extension undef " prognoUndefines the tone \fIprogno\fP of current tone bank..TP.BI "#extension legato " "progno " {0|1}Specifies whether legato is enable (\fB1\fP) or disable (\fB0\fP) on\fIprogno\fP..TP.BI "#extension level " "progno tva_level"Sets the standard value of changing amplification when processing DrumInstrument TVA Level of NRPN.  Unless Drum Instrument TVA Level isspecified at playing, the amplification is not influenced.\fIprogno\fP can carry out package specification by `,' and/or[\fIstart\fP]\-[\fIend\fP].  If start and end are omitted, they areassumed to be \fB0\fP and \fB127\fP respectively..TP.BI "#extension damper " "progno " {0|1}Specifies whether redamper and half-damper are enable (\fB1\fP) ordisable (\fB0\fP) on \fIprogno\fP..TP.BI "#extension playnote " "progno note"Sets the frequency of pronounce to \fBnote\fP.  If the frequency ofpronounce is specified by GS SysEx Play Note, the pitch is changedappropriately according to the value.  \fIprogno\fP can carry outpackage specification by `,' and/or [\fIstart\fP]\-[\fIend\fP].  Ifstart and end are omitted, they are assumed to be \fB0\fP and\fB127\fP respectively..spFor example:.brdrumset 0.br#extension playnote \-37,39,44\-46,55\-60.TP.BI "#extension delaysend " "progno level".br.ns.TP.BI "#extension chorussend " "progno level".br.ns.TP.BI "#extension reverbsend " "progno level"Sets the send level when drum part effect is enable.  All initial valueare \fB127\fP.  If one of delay, chorus and reverb is at least set up,the effect which is not set as the tone will become the initial value\fB0\fP.  \fIprogno\fP can carry out package specification by `,'and/or [\fIstart\fP]\-[\fIend\fP].  If start and end are omitted, theyare assumed to be \fB0\fP and \fB127\fP respectively..TP.BI "#extension rnddelay " "progno msec"For every pronunciation, it is random and less than a maximum of\fImsec\fP delay.  The distribution of random value is pink noise(1/f fluctuation) rather than a white noise..LPThese \fB#extension\fP statements are beginning with character `#'that is the comment flag of old TiMidity (version 0.2i or earlier).So these statements are treated as comment line..brThe latest \fBTiMidity++\fP treats \fB#extension\fP as white\-space.So you can omit it..LPIf any file\-name expression ended with character `|' (Ascii 0x7c),the file\-name is treated as command and outputs of the commandare also examined as arguments of statements..br\fBsource\fP \fIcommand\fP| causes the output of \fIcommand\fP becomesthe argument of \fBsource\fP.  It is convenient to choose settings of\fBTiMidity++\fP according to environment.  In addition, if a spaceenters on the way like \fIcommand\fP |, it will be divided at the timeof setting file reading, and will no longer be regarded as a command.This function is applicable to all the places that can specify a filename..sp.RStimidity 'cat fild.mid|'.RE.spwill read from the output of cat fild.mid..SH FILES.TP.B /etc/timidity.cfg.TP.B /usr/local/share/timidity/timidity.cfg.SH SEE ALSOtimidity(1), lsmidiprog(1), mididump(1), patinfo(1), sf2text(1), wav2pat(1).SH COPYRIGHTCopyright (C) 1999\-2004 Masanao Izumo <iz@onicos.co.jp>.brCopyright (C) 1995 Tuukka Toivonen <tt@cgs.fi>.LPThe original version was developed by Tuukka Toivonen <tt@cgs.fi>until the release of TiMidity\-0.2i.  His development was discontinuedbecause of his being busy with work..LPThis program is free software; you can redistribute it and/or modifyit under the terms of the \fIGNU General Public License\fP aspublished by the Free Software Foundation; either version 2 of theLicense, or (at your option) any later version..LPThis program is distributed in the hope that it will be useful, butWITHOUT ANY WARRANTY; without even the implied warranty ofMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the \fIGNUGeneral Public License\fP for more details..LPYou should have received a copy of the GNU General Public Licensealong with this program; if not, write to the Free SoftwareFoundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111\-1307USA.SH AVAILABILITYThe latest release is available on the \fBTiMidity++\fP Page,.LPURL http://www.timidity.jp/