/**
  ******************************************************************************
  * @file    stm3210c_eval_ioe.h
  * @author  MCD Application Team
  * @version V3.1.2
  * @date    09/28/2009
  * @brief   This file contains all the functions prototypes for the IO Expander
  *   firmware driver.
  ******************************************************************************
  * @copy
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
  */ 

  /* File Info : ---------------------------------------------------------------
    SUPPORTED FEATURES:
      - IO Read/write : Set/Reset and Read (Polling/Interrupt)
      - Joystick: config and Read (Polling/Interrupt)
      - Touch Screen Features: Single point mode (Polling/Interrupt)
      - TempSensor Feature: accuracy not determined (Polling).

    UNSUPPORTED FEATURES:
      - Row ADC Feature is not supported (not implemented on STM3210C-EVAL board)
  ----------------------------------------------------------------------------*/


/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __IO_EXPANDER_H
#define __IO_EXPANDER_H
#ifdef __cplusplus
 extern "C" {
#endif   
   
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"

/** @addtogroup Utilities
  * @{
  */

/** @defgroup STM3210C_EVAL_IOE 
  * @brief STM3210C_EVAL_IOE IO Expander driver modules
  * @{
  */    


/** @defgroup EVAL_IOE_Exported_Types
  * @{
  */ 

/** 
  * @brief  Touch Screen Information structure  
  */ 
typedef struct
{
  uint16_t TouchDetected;
  uint16_t X;
  uint16_t Y;
  uint16_t Z;
}TS_STATE; 
  
/** 
  * @brief  Joystick State definitions  
  */ 
#ifndef __STM32_EVAL_H
typedef enum 
{ 
  JOY_NONE = 0,
  JOY_CENTER = 1,
  JOY_DOWN = 2,
  JOY_LEFT = 3,
  JOY_RIGHT = 4,
  JOY_UP = 5
} JOY_State_TypeDef;
#endif /* __STM32_EVAL_H */
 
/** 
  * @brief  IO_Expander Error codes  
  */ 
typedef enum
{
  IOE_OK = 0,
  IOE_FAILURE, 
  IOE_TIEMOUT,
  PARAM_ERROR,
  IOE1_NOT_OPERATIONAL, 
  IOE2_NOT_OPERATIONAL
}IOE_Status_TypDef;

/** 
  * @brief  IO bit values  
  */ 
typedef enum
{
  BitReset = 0,
  BitSet = 1
}IOE_BitValue_TypeDef;

/**
  * @}
  */ 


/** @defgroup EVAL_IOE_Exported_Constants
  * @{
  */ 

/**
 * @brief Uncomment the line below to enable verfying each written byte in write
 *        operation. The I2C_WriteDeviceRegister() function will then compare the
 *        written and read data and return error status if a mismatch occurs.
 */
/* #define VERIFY_WRITTENDATA */

/**
 * @brief Uncomment the line below if you want to use user defined Delay function
 *        (for precise timing), otherwise default _delay_ function defined within
 *         this driver is used (less precise timing).  
 */
/* #define USE_Delay */

#ifdef USE_Delay
#include "main.h"
 
  #define _delay_     Delay  /* !< User can provide more timing precise _delay_ function
                                   (with 10ms time base), using SysTick for example */
#else
  #define _delay_     delay      /* !< Default _delay_ function with less precise timing */
#endif    

/*------------------------------------------------------------------------------
    Hardware Configuration 
------------------------------------------------------------------------------*/
/** 
  * @brief  I2C port definitions  
  */ 
#define IOE_I2C                     I2C1
#define IOE_I2C_PORT                GPIOB
#define IOE_SCL_PIN                 GPIO_Pin_6
#define IOE_SDA_PIN                 GPIO_Pin_7
#define RCC_APB1Periph_IOE_I2C      RCC_APB1Periph_I2C1
#define RCC_APB_IOE_I2C_PORT        RCC_APB2Periph_GPIOB
#define IOE_I2C_SPEED               400000

/** 
  * @brief  IO Expander Interrupt line on EXTI  
  */ 
#define GPIO_Pin_IOE_ITPIN          GPIO_Pin_14
#define GPIO_IOE_ITPORT             GPIOB
#define RCC_APB_GPIO_IOE_ITPORT     RCC_APB2Periph_GPIOB
#define GPIO_PortSource_IOE_ITPORT  GPIO_PortSourceGPIOB
#define GPIO_PinSource_IOE_ITPIN    GPIO_PinSource14
#define EXTI_LINE_IOE_ITLINE        EXTI_Line14
#define IOE_IT_EXTI_IRQn            EXTI15_10_IRQn

/** @brief Eval Board IO Pins definition 
  * @{
  */ 
#define AUDIO_RESET_PIN             IO_Pin_2 /* IO_Exapnader_2 */ /* Output */
#define MII_INT_PIN                 IO_Pin_0 /* IO_Exapnader_2 */ /* Output */
#define VBAT_DIV_PIN                IO_Pin_0 /* IO_Exapnader_1 */ /* Output */
#define MEMS_INT1_PIN               IO_Pin_3 /* IO_Exapnader_1 */ /* Input */
#define MEMS_INT2_PIN               IO_Pin_2 /* IO_Exapnader_1 */ /* Input */

/** @brief Eval Board both IO Exapanders Pins definition 
  * @{
  */ 
#define IO1_IN_ALL_PINS          (uint32_t)(MEMS_INT1_PIN | MEMS_INT2_PIN)
#define IO2_IN_ALL_PINS          (uint32_t)(JOY_IO_PINS)
#define IO1_OUT_ALL_PINS         (uint32_t)(VBAT_DIV_PIN)
#define IO2_OUT_ALL_PINS         (uint32_t)(AUDIO_RESET_PIN | MII_INT_PIN)

/** 
  * @brief  The 7 bits IO Expanders adresses and chip IDs  
  */ 
#define IOE_1_ADDR                 0x82    
#define IOE_2_ADDR                 0x88    
#define STMPE811_ID                0x0811


/*------------------------------------------------------------------------------
    Functional and Interrupt Management
------------------------------------------------------------------------------*/
/** 
  * @brief  IO Expander Functionalities definitions  
  */ 
#define IOE_ADC_FCT              0x01
#define IOE_TS_FCT               0x02
#define IOE_IO_FCT               0x04
#define IOE_TEMPSENS_FCT         0x08

/** 
  * @brief  Interrupt source configuration definitons  
  */ 
#define IOE_ITSRC_TSC           0x01  /* IO_Exapnder 1 */
#define IOE_ITSRC_INMEMS        0x02  /* IO_Exapnder 1 */
#define IOE_ITSRC_JOYSTICK      0x04  /* IO_Exapnder 2 */
#define IOE_ITSRC_TEMPSENS      0x08  /* IO_Exapnder 2 */

/** 
  * @brief  Glaobal Interrupts definitions  
  */ 
#define IOE_GIT_GPIO             0x80
#define IOE_GIT_ADC              0x40
#define IOE_GIT_TEMP             0x20
#define IOE_GIT_FE               0x10
#define IOE_GIT_FF               0x08
#define IOE_GIT_FOV              0x04
#define IOE_GIT_FTH              0x02
#define IOE_GIT_TOUCH            0x01


/*------------------------------------------------------------------------------
    STMPE811 device register definition
------------------------------------------------------------------------------*/
/** 
  * @brief  Identification registers  
  */ 
#define IOE_REG_CHP_ID             0x00
#define IOE_REG_ID_VER             0x02
 /** 
  * @brief  General Control Registers  
  */ 
#define IOE_REG_SYS_CTRL1          0x03
#define IOE_REG_SYS_CTRL2          0x04
#define IOE_REG_SPI_CFG            0x08 
/** 
  * @brief  Interrupt Control register  
  */ 
#define IOE_REG_INT_CTRL           0x09
#define IOE_REG_INT_EN             0x0A
#define IOE_REG_INT_STA            0x0B
#define IOE_REG_GPIO_INT_EN        0x0C
#define IOE_REG_GPIO_INT_STA       0x0D
/** 
  * @brief  GPIO Registers  
  */ 
#define IOE_REG_GPIO_SET_PIN       0x10
#define IOE_REG_GPIO_CLR_PIN       0x11
#define IOE_REG_GPIO_MP_STA        0x12
#define IOE_REG_GPIO_DIR           0x13
#define IOE_REG_GPIO_ED            0x14
#define IOE_REG_GPIO_RE            0x15
#define IOE_REG_GPIO_FE            0x16
#define IOE_REG_GPIO_AF            0x17
/** 
  * @brief  ADC Registers  
  */ 
#define IOE_REG_ADC_INT_EN         0x0E
#define IOE_REG_ADC_INT_STA        0x0F
#define IOE_REG_ADC_CTRL1          0x20
#define IOE_REG_ADC_CTRL2          0x21
#define IOE_REG_ADC_CAPT           0x22
#define IOE_REG_ADC_DATA_CH0       0x30 /* 16-Bit register */
#define IOE_REG_ADC_DATA_CH1       0x32 /* 16-Bit register */
#define IOE_REG_ADC_DATA_CH2       0x34 /* 16-Bit register */
#define IOE_REG_ADC_DATA_CH3       0x36 /* 16-Bit register */
#define IOE_REG_ADC_DATA_CH4       0x38 /* 16-Bit register */
#define IOE_REG_ADC_DATA_CH5       0x3A /* 16-Bit register */
#define IOE_REG_ADC_DATA_CH6       0x3B /* 16-Bit register */
#define IOE_REG_ADC_DATA_CH7       0x3C /* 16-Bit register */ 
/** 
  * @brief  TouchScreen Registers  
  */ 
#define IOE_REG_TSC_CTRL           0x40
#define IOE_REG_TSC_CFG            0x41
#define IOE_REG_WDM_TR_X           0x42 
#define IOE_REG_WDM_TR_Y           0x44
#define IOE_REG_WDM_BL_X           0x46
#define IOE_REG_WDM_BL_Y           0x48
#define IOE_REG_FIFO_TH            0x4A
#define IOE_REG_FIFO_STA           0x4B
#define IOE_REG_FIFO_SIZE          0x4C
#define IOE_REG_TSC_DATA_X         0x4D 
#define IOE_REG_TSC_DATA_Y         0x4F
#define IOE_REG_TSC_DATA_Z         0x51
#define IOE_REG_TSC_DATA_XYZ       0x52 
#define IOE_REG_TSC_FRACT_XYZ      0x56
#define IOE_REG_TSC_DATA           0x57
#define IOE_REG_TSC_I_DRIVE        0x58
#define IOE_REG_TSC_SHIELD         0x59
/** 
  * @brief  Temperature Sensor registers  
  */ 
#define IOE_REG_TEMP_CTRL          0x60
#define IOE_REG_TEMP_DATA          0x61
#define IOE_REG_TEMP_TH            0x62


/*------------------------------------------------------------------------------
    Functions parameters defines
------------------------------------------------------------------------------*/
/** @brief Touch Screen Pins definition 
  * @{
  */ 
#define TOUCH_YD                    IO_Pin_1 /* IO_Exapnader_1 */ /* Input */
#define TOUCH_XD                    IO_Pin_2 /* IO_Exapnader_1 */ /* Input */
#define TOUCH_YU                    IO_Pin_3 /* IO_Exapnader_1 */ /* Input */
#define TOUCH_XU                    IO_Pin_4 /* IO_Exapnader_1 */ /* Input */
#define TOUCH_IO_ALL                (uint32_t)(IO_Pin_1 | IO_Pin_2 | IO_Pin_3 | IO_Pin_4)

/** @defgroup JOYSTICK Pins definition 
  * @{
  */ 
#define JOY_IO_CENTER                IO_Pin_7
#define JOY_IO_DOWN                  IO_Pin_6
#define JOY_IO_LEFT                  IO_Pin_5
#define JOY_IO_RIGHT                 IO_Pin_4
#define JOY_IO_UP                    IO_Pin_3
#define JOY_IO_NONE                  JOY_IO_PINS
#define JOY_IO_PINS                  (uint32_t)(IO_Pin_3 | IO_Pin_4 | IO_Pin_5 | IO_Pin_6 | IO_Pin_7)

/** 
  * @brief  IO Pins  
  */ 
#define IO_Pin_0                 0x01
#define IO_Pin_1                 0x02
#define IO_Pin_2                 0x04
#define IO_Pin_3                 0x08
#define IO_Pin_4                 0x10
#define IO_Pin_5                 0x20
#define IO_Pin_6                 0x40
#define IO_Pin_7                 0x80
#define IO_Pin_ALL               0xFF

/** 
  * @brief  IO Pin directions  
  */ 
#define Direction_IN             0x00
#define Direction_OUT            0x01

/** 
  * @brief  Interrupt Line output parameters  
  */ 
#define Polarity_Low             0x00
#define Polarity_High            0x04
#define Type_Level               0x00
#define Type_Edge                0x02

/** 
  * @brief IO Interrupts  
  */ 
#define IO_IT_0                  0x01
#define IO_IT_1                  0x02
#define IO_IT_2                  0x04
#define IO_IT_3                  0x08
#define IO_IT_4                  0x10
#define IO_IT_5                  0x20
#define IO_IT_6                  0x40
#define IO_IT_7                  0x80
#define ALL_IT                   0xFF
#define IOE_JOY_IT               (uint8_t)(IO_IT_3 | IO_IT_4 | IO_IT_5 | IO_IT_6 | IO_IT_7)
#define IOE_TS_IT                (uint8_t)(IO_IT_0 | IO_IT_1 | IO_IT_2)
#define IOE_INMEMS_IT            (uint8_t)(IO_IT_2 | IO_IT_3)

/** 
  * @brief  Edge detection value  
  */ 
#define EDGE_FALLING              0x01
#define EDGE_RISING               0x02

/** 
  * @brief  Global interrupt Enable bit  
  */ 
#define IOE_GIT_EN                0x01

/**
  * @}
  */ 



/** @defgroup EVAL_IOE_Exported_Macros
  * @{
  */ 
/**
  * @}
  */ 



/** @defgroup EVAL_IOE_Exported_Functions
  * @{
  */ 

/** 
  * @brief  Configuration and initialization functions  
  */
uint8_t IOE_Config(void);
uint8_t IOE_ITConfig(uint32_t IOE_ITSRC_Source);

/** 
  * @brief IO pins control functions
  */
uint8_t IOE_WriteIOPin(uint8_t IO_Pin, IOE_BitValue_TypeDef BitVal);
uint8_t IOE_ReadIOPin(uint32_t IO_Pin);
JOY_State_TypeDef IOE_JoyStickGetState(void);

/** 
  * @brief Touch Screen controller functions
  */
TS_STATE* IOE_TS_GetState(void);

/** 
  * @brief Interrupts Mangement functions
  */
FlagStatus IOE_GetGITStatus(uint8_t DeviceAddr, uint8_t Global_IT);
uint8_t IOE_ClearGITPending(uint8_t DeviceAddr, uint8_t IO_IT);
FlagStatus IOE_GetIOITStatus(uint8_t DeviceAddr, uint8_t IO_IT);
uint8_t IOE_ClearIOITPending(uint8_t DeviceAddr, uint8_t IO_IT);

/** 
  * @brief Temperature Sensor functions
  */
uint32_t IOE_TempSens_GetData(void);

/** 
  * @brief IO-Expander Control functions
  */
uint8_t IOE_IsOperational(uint8_t DeviceAddr);
uint8_t IOE_Reset(uint8_t DeviceAddr);
uint16_t IOE_ReadID(uint8_t DeviceAddr);

uint8_t IOE_FnctCmd(uint8_t DeviceAddr, uint8_t Fct, FunctionalState NewState);
uint8_t IOE_IOPinConfig(uint8_t DeviceAddr, uint8_t IO_Pin, uint8_t Direction);
uint8_t IOE_GITCmd(uint8_t DeviceAddr, FunctionalState NewState);
uint8_t IOE_GITConfig(uint8_t DeviceAddr, uint8_t Global_IT, FunctionalState NewState);
uint8_t IOE_IOITConfig(uint8_t DeviceAddr, uint8_t IO_IT, FunctionalState NewState);

/** 
  * @brief Low Layer functions
  */
uint8_t IOE_TS_Config(void);
uint8_t IOE_TempSens_Config(void);
uint8_t IOE_IOAFConfig(uint8_t DeviceAddr, uint8_t IO_Pin, FunctionalState NewState);
uint8_t IOE_IOEdgeConfig(uint8_t DeviceAddr, uint8_t IO_Pin, uint8_t Edge);
uint8_t IOE_ITOutConfig(uint8_t Polarity, uint8_t Type);

uint8_t I2C_WriteDeviceRegister(uint8_t DeviceAddr, uint8_t RegisterAddr, uint8_t RegisterValue);
uint8_t I2C_ReadDeviceRegister(uint8_t DeviceAddr, uint8_t RegisterAddr);
uint32_t I2C_ReadDataBuffer(uint8_t DeviceAddr, uint32_t RegisterAddr);

#ifdef __cplusplus
}
#endif
#endif /* __IO_EXPANDER_H */

/**
  * @}
  */ 

/**
  * @}
  */ 

/**
  * @}
  */   
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/