?? 8.3-2.c

?? 單片機應用開發實例源代碼文件列表 5.3-1.c 5.3-2.c
?? C
?? 第 1 頁 / 共 2 頁
字號:
12 下一頁
#include <io8515.h>
#include <macros.h>

#define ulong	unsigned long
#define uint	unsigned int
#define uchar	unsigned char

// ASCII字符控制代碼解釋定義
#define STX	0x02
#define ETX	0x03
#define EOT	0x04
#define ENQ	0x05
#define BS	0x08
#define CR	0x0D
#define LF	0x0A
#define DLE	0x10
#define ETB	0x17
#define SPACE	0x20
#define COMMA	0x2C
                	
#define TRUE	1
#define FALSE0
                	
#define HIGH	1
#define LOW	0

// T6963C 端口定義由匯編語言程序定義外部端口
extern uchar LCMDW,LCMCW;		//0xf000 數據口
					            //0xf100 命令口

// T6963C 命令定義
#define LC_CUR_POS	0x21		// 光標位置設置
#define LC_CGR_POS	0x22		// CGRAM偏置地址設置
#define LC_ADD_POS	0x24		// 地址指針位置
#define LC_TXT_STP	0x40		// 文本區首址
#define LC_TXT_WID	0x41		// 文本區寬度
#define LC_GRH_STP	0x42		// 圖形區首址
#define LC_GRH_WID	0x43		// 圖形區寬度
#define LC_MOD_OR	0x80		// 顯示方式：邏輯"或"
#define LC_MOD_XOR	0x81		// 顯示方式：邏輯"異或"
#define LC_MOD_AND0x82		// 顯示方式：邏輯"與"
#define LC_MOD_TCH	0x83		// 顯示方式：文本特征
#define LC_DIS_SW	0x90		// 顯示開關：D0=1/0:光標閃爍啟用/禁用；
					            // D1=1/0:光標顯示啟用/禁用；
					            // D2=1/0:文本顯示啟用/禁用；
					            // D3=1/0:圖形顯示啟用/禁用；
#define LC_CUR_SHP	0xA0		// 光標形狀選擇：0xA0-0xA7表示光標占的行數
#define LC_AUT_WR	0xB0		// 自動寫設置
#define LC_AUT_RD	0xB1		// 自動讀設置
#define LC_AUT_OVR	0xB2		// 自動讀/寫結束
#define LC_INC_WR	0xC0		// 數據一次寫，地址加1
#define LC_INC_RD	0xC1		// 數據一次讀，地址加1
#define LC_DEC_WR	0xC2		// 數據一次寫，地址減1
#define LC_DEC_RD	0xC3		// 數據一次讀，地址減1
#define LC_NOC_WR	0xC4		// 數據一次寫，地址不變
#define LC_NOC_RD	0xC5		// 數據一次讀，地址不變
#define LC_SCN_RD	0xE0		// 屏讀
#define LC_SCN_CP	0xE8		// 屏拷貝
#define LC_BIT_OP	0xF0		// 位操作：
					            // D0-D2：定義D0-D7位；D3：1置位；0：清除

uchar const uPowArr[]  = {0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80};

// ASCII 字模寬度及高度定義
#define ASC_CHR_WIDTH	8
#define ASC_CHR_HEIGHT	16
// ASCII 字模，顯示為8*16
char flash ASC_MSK[96*16] = {

	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//--     --
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x18,0x3C,0x3C,0x3C,0x18,	//--   !  --
	0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x66,0x66,0x66,0x00,0x00,	//--   "  --
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x36,0x36,0x7F,0x36,0x36,	    //--   #  --
	0x36,0x7F,0x36,0x36,0x00,0x00,0x00,0x00,
	0x00,0x18,0x18,0x3C,0x66,0x60,0x30,0x18,	//--   $  --
	0x0C,0x06,0x66,0x3C,0x18,0x18,0x00,0x00,
	0x00,0x00,0x70,0xD8,0xDA,0x76,0x0C,0x18,	//--   %  --
	0x30,0x6E,0x5B,0x1B,0x0E,0x00,0x00,0x00,
	0x00,0x00,0x00,0x38,0x6C,0x6C,0x38,0x60,	//--   &  --
	0x6F,0x66,0x66,0x3B,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x18,0x18,0x18,0x00,0x00,	//--   '  --
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x0C,0x18,0x18,0x30,0x30,	//--   (  --
	0x30,0x30,0x30,0x18,0x18,0x0C,0x00,0x00,
	0x00,0x00,0x00,0x30,0x18,0x18,0x0C,0x0C,	//--   )  --
	0x0C,0x0C,0x0C,0x18,0x18,0x30,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x36,0x1C,0x7F,	//--   *  --
	0x1C,0x36,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x7E,	//--   +  --
	0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//--   ,  --
	0x00,0x00,0x1C,0x1C,0x0C,0x18,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7E,	//--   -  --
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//--   .  --
	0x00,0x00,0x1C,0x1C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x06,0x06,0x0C,0x0C,0x18,	//--   /  --
	0x18,0x30,0x30,0x60,0x60,0x00,0x00,0x00,
	0x00,0x00,0x00,0x1E,0x33,0x37,0x37,0x33,	//--   0  --
	0x3B,0x3B,0x33,0x1E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x0C,0x1C,0x7C,0x0C,0x0C,	//--   1  --
	0x0C,0x0C,0x0C,0x0C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x66,0x06,0x0C,	//--   2  --
	0x18,0x30,0x60,0x7E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x66,0x06,0x1C,	//--   3  --
	0x06,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x30,0x30,0x36,0x36,0x36,	//--   4  --
	0x66,0x7F,0x06,0x06,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x7E,0x60,0x60,0x60,0x7C,	//--   5  --
	0x06,0x06,0x0C,0x78,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x1C,0x18,0x30,0x7C,0x66,	//--   6  --
	0x66,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x7E,0x06,0x0C,0x0C,0x18,	//--   7  --
	0x18,0x30,0x30,0x30,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x66,0x76,0x3C,	//--   8  --
	0x6E,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x66,0x66,0x66,	//--   9  --
	0x3E,0x0C,0x18,0x38,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x00,	//--   :  --
	0x00,0x00,0x1C,0x1C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x1C,0x1C,0x00,	//--   ;  --
	0x00,0x00,0x1C,0x1C,0x0C,0x18,0x00,0x00,
	0x00,0x00,0x00,0x06,0x0C,0x18,0x30,0x60,	//--   <  --
	0x30,0x18,0x0C,0x06,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x7E,0x00,	//--   =  --
	0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x60,0x30,0x18,0x0C,0x06,	//--   >  --
	0x0C,0x18,0x30,0x60,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x66,0x0C,0x18,	//--   ?  --
	0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x7E,0xC3,0xC3,0xCF,0xDB,	//--   @  --
	0xDB,0xCF,0xC0,0x7F,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x18,0x3C,0x66,0x66,0x66,	//--   A  --
	0x7E,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x7C,0x66,0x66,0x66,0x7C,	//--   B  --
	0x66,0x66,0x66,0x7C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x66,0x60,0x60,	//--   C  --
	0x60,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x78,0x6C,0x66,0x66,0x66,	//--   D  --
	0x66,0x66,0x6C,0x78,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x7E,0x60,0x60,0x60,0x7C,	//--   E  --
	0x60,0x60,0x60,0x7E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x7E,0x60,0x60,0x60,0x7C,	//--   F  --
	0x60,0x60,0x60,0x60,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x66,0x60,0x60,	//--   G  --
	0x6E,0x66,0x66,0x3E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x7E,	//--   H  --
	0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x18,0x18,0x18,0x18,	//--   I  --
	0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x06,0x06,0x06,0x06,0x06,	//--   J  --
	0x06,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x66,0x66,0x6C,0x6C,0x78,	//--   K  --
	0x6C,0x6C,0x66,0x66,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x60,0x60,0x60,0x60,0x60,	//--   L  --
	0x60,0x60,0x60,0x7E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x63,0x63,0x77,0x6B,0x6B,	//--   M  --
	0x6B,0x63,0x63,0x63,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x63,0x63,0x73,0x7B,0x6F,	//--   N  --
	0x67,0x63,0x63,0x63,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x66,0x66,0x66,	//--   O  --
	0x66,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x7C,0x66,0x66,0x66,0x7C,	//--   P  --
	0x60,0x60,0x60,0x60,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x66,0x66,0x66,	//--   Q  --
	0x66,0x66,0x66,0x3C,0x0C,0x06,0x00,0x00,
	0x00,0x00,0x00,0x7C,0x66,0x66,0x66,0x7C,	//--   R  --
	0x6C,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x66,0x60,0x30,0x18,	//--   S  --
	0x0C,0x06,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x7E,0x18,0x18,0x18,0x18,	//--   T  --
	0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,	//--   U  --
	0x66,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,	//--   V  --
	0x66,0x66,0x3C,0x18,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x63,0x63,0x63,0x6B,0x6B,	//--   W  --
	0x6B,0x36,0x36,0x36,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x66,0x66,0x34,0x18,0x18,	//--   X  --
	0x2C,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x3C,	//--   Y  --
	0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x7E,0x06,0x06,0x0C,0x18,	//--   Z  --
	0x30,0x60,0x60,0x7E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x30,0x30,0x30,0x30,	//--   [  --
	0x30,0x30,0x30,0x30,0x30,0x30,0x3C,0x3C,
	0x00,0x00,0x00,0x60,0x60,0x30,0x30,0x18,	//--   \  --
	0x18,0x0C,0x0C,0x06,0x06,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3C,0x0C,0x0C,0x0C,0x0C,	//--   ]  --
	0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x3C,0x3C,
	0x00,0x18,0x3C,0x66,0x00,0x00,0x00,0x00,	//--   ^  --
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//--   _  --
	0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,
	0x00,0x38,0x18,0x0C,0x00,0x00,0x00,0x00,	//--   `  --
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x3C,0x06,0x06,	//--   a  --
	0x3E,0x66,0x66,0x3E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x60,0x60,0x7C,0x66,0x66,	//--   b  --
	0x66,0x66,0x66,0x7C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x3C,0x66,0x60,	//--   c  --
	0x60,0x60,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x06,0x06,0x3E,0x66,0x66,	//--   d  --
	0x66,0x66,0x66,0x3E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x3C,0x66,0x66,	//--   e  --
	0x7E,0x60,0x60,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x1E,0x30,0x30,0x30,0x7E,	//--   f  --
	0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x3E,0x66,0x66,	//--   g  --
	0x66,0x66,0x66,0x3E,0x06,0x06,0x7C,0x7C,
	0x00,0x00,0x00,0x60,0x60,0x7C,0x66,0x66,	//--   h  --
	0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
	0x00,0x00,0x18,0x18,0x00,0x78,0x18,0x18,	//--   i  --
	0x18,0x18,0x18,0x7E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x0C,0x0C,0x00,0x3C,0x0C,0x0C,	//--   j  --
	0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x78,0x78,
	0x00,0x00,0x00,0x60,0x60,0x66,0x66,0x6C,	//--   k  --
	0x78,0x6C,0x66,0x66,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x78,0x18,0x18,0x18,0x18,	//--   l  --
	0x18,0x18,0x18,0x7E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x7E,0x6B,0x6B,	//--   m  --
	0x6B,0x6B,0x6B,0x63,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x7C,0x66,0x66,	//--   n  --
	0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x3C,0x66,0x66,	//--   o  --
	0x66,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x7C,0x66,0x66,	//--   p  --
	0x66,0x66,0x66,0x7C,0x60,0x60,0x60,0x60,
	0x00,0x00,0x00,0x00,0x00,0x3E,0x66,0x66,	//--   q  --
	0x66,0x66,0x66,0x3E,0x06,0x06,0x06,0x06,
	0x00,0x00,0x00,0x00,0x00,0x66,0x6E,0x70,	//--   r  --
	0x60,0x60,0x60,0x60,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x3E,0x60,0x60,	//--   s  --
	0x3C,0x06,0x06,0x7C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x30,0x30,0x7E,0x30,0x30,	//--   t  --
	0x30,0x30,0x30,0x1E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,	//--   u  --
	0x66,0x66,0x66,0x3E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,	//--   v  --
	0x66,0x66,0x3C,0x18,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x63,0x6B,0x6B,	//--   w  --
	0x6B,0x6B,0x36,0x36,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x3C,	//--   x  --
	0x18,0x3C,0x66,0x66,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,	//--   y  --
	0x66,0x66,0x66,0x3C,0x0C,0x18,0xF0,0xF0,
	0x00,0x00,0x00,0x00,0x00,0x7E,0x06,0x0C,	//--   z  --
	0x18,0x30,0x60,0x7E,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x0C,0x18,0x18,0x18,0x30,	//--   {  --
	0x60,0x30,0x18,0x18,0x18,0x0C,0x00,0x00,
	0x00,0x00,0x00,0x18,0x18,0x18,0x18,0x18,	//--   |  --
	0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
	0x00,0x00,0x00,0x30,0x18,0x18,0x18,0x0C,	//--   }  --
	0x06,0x0C,0x18,0x18,0x18,0x30,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x71,0xDB,	//--   ~  --
	0x8E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//--   .  --
	0x00,0x00,0x1C,0x1C,0x00,0x00,0x00,0x00
};
     
typedef struct typFNT_GB16		                // 漢字字模數據結構
{
	signed char Index[2];
	char Msk[32];
};

struct typFNT_GB16 flash GB_16[] = 
{	                                        // 顯示為16*16
"中",	0x01,0x00,0x01,0x00,0x21,0x08,0x3F,0xFC,
	0x21,0x08,0x21,0x08,0x21,0x08,0x21,0x08,
	0x21,0x08,0x3F,0xF8,0x21,0x08,0x01,0x00,
	0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x00,
"文",	0x02,0x00,0x01,0x00,0x01,0x00,0xFF,0xFE,
        0x08,0x20,0x08,0x20,0x08,0x20,0x04,0x40,
	0x04,0x40,0x02,0x80,0x01,0x00,0x02,0x80,
        0x04,0x60,0x18,0x1E,0xE0,0x08,0x00,0x00,
"測",	0x40,0x02,0x27,0xC2,0x24,0x42,0x84,0x52,
	0x45,0x52,0x55,0x52,0x15,0x52,0x25,0x52,
	0x25,0x52,0x25,0x52,0xC5,0x52,0x41,0x02,
        0x42,0x82,0x42,0x42,0x44,0x4A,0x48,0x04,
"試",	0x00,0x20,0x40,0x28,0x20,0x24,0x30,0x24,
	0x27,0xFE,0x00,0x20,0xE0,0x20,0x27,0xE0,
	0x21,0x20,0x21,0x10,0x21,0x10,0x21,0x0A,
        0x29,0xCA,0x36,0x06,0x20,0x02,0x00,0x00,
};
uchar flash turnf[8] = {7,6,5,4,3,2,1,0};
uchar gCurRow,gCurCol;	                 // 當前行、列存儲，行高16點，列寬8點

//取當前行數據  
uchar fnGetRow(void)
{
	return gCurRow;
}

//取當前列數據  
uchar fnGetCol(void)
{
	return gCurCol;
}

//狀態位STA1,STA0判斷（讀寫指令和讀寫數據）	
//在讀寫數據或者寫入命令前必須保證均為1	
uchar fnSTA01(void)			
{
	uchar i;
	
	for(i=10;i>0;i--)
	{
	if((LCMCW & 0x03) == 0x03)		// 讀取狀態
	break;
	}
	return i;					        // 若返回零，說明錯誤
}

/********************************************************/
//檢查STA2,如果 STA2=1 為自動讀狀態			
/********************************************************/
uchar fnSTA2(void)
{
	uchar i;
	
	for(i=10;i>0;i--)
	{
		if((LCMCW & 0x04) == 0x04)
			break;
	}
	return i;					          // 若返回零，說明錯誤
}

/********************************************************/
//狀態位STA3判斷（STA3 = 1 數據自動寫狀態）		
/********************************************************/
uchar fnSTA3(void)
{
	uchar i;
	
	for(i=10;i>0;i--)
	{
		if((LCMCW & 0x08) == 0x08)
			break;
	}
	return i;					          // 若返回零，說明錯誤
}

/********************************************************/
//狀態位STA6判斷（STA6 =1 屏讀/屏拷貝狀態）		
/********************************************************/
uchar fnSTA6(void)
{
	uchar i;
	
	for(i=10;i>0;i--)
	{
		if((LCMCW & 0x40) == 0x40)
			break;
	}
	return i;					          // 若返回零，說明錯誤
}

/********************************************************/
//寫雙參數的指令					
/********************************************************/
uchar fnPR1(uchar uCmd,uchar uPar1,uchar uPar2)
{
12 下一頁
?? 文件大小 22 K
?? 上傳用戶 As
?? 所屬分類單片機開發
??? 相關標簽

#5.3 #單片機應用 #開發實例 #源代碼
?? 快捷鍵說明

復制代碼 Ctrl + C
搜索代碼 Ctrl + F
全屏模式 F11
切換主題 Ctrl + Shift + D
顯示快捷鍵 ?
增大字號 Ctrl + =
減小字號 Ctrl + -
亚洲欧美第一页_禁久久精品乱码_粉嫩av一区二区三区免费野_久草精品视频

?? 8.3-2.c

?? 快捷鍵說明
