?? hifn7751var.h
字號:
/* $FreeBSD: src/sys/dev/hifn/hifn7751var.h,v 1.5 2004/10/15 00:36:07 sam Exp $ *//* $OpenBSD: hifn7751var.h,v 1.42 2002/04/08 17:49:42 jason Exp $ *//* * Invertex AEON / Hifn 7751 driver * Copyright (c) 1999 Invertex Inc. All rights reserved. * Copyright (c) 1999 Theo de Raadt * Copyright (c) 2000-2001 Network Security Technologies, Inc. * http://www.netsec.net * * Please send any comments, feedback, bug-fixes, or feature requests to * software@invertex.com. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Effort sponsored in part by the Defense Advanced Research Projects * Agency (DARPA) and Air Force Research Laboratory, Air Force * Materiel Command, USAF, under agreement number F30602-01-2-0537. * */#ifndef __HIFN7751VAR_H__#define __HIFN7751VAR_H__#ifdef __KERNEL__/* * Some configurable values for the driver. By default command+result * descriptor rings are the same size. The src+dst descriptor rings * are sized at 3.5x the number of potential commands. Slower parts * (e.g. 7951) tend to run out of src descriptors; faster parts (7811) * src+cmd/result descriptors. It's not clear that increasing the size * of the descriptor rings helps performance significantly as other * factors tend to come into play (e.g. copying misaligned packets). */#define HIFN_D_CMD_RSIZE 24 /* command descriptors */#define HIFN_D_SRC_RSIZE ((HIFN_D_CMD_RSIZE * 7) / 2) /* source descriptors */#define HIFN_D_RES_RSIZE HIFN_D_CMD_RSIZE /* result descriptors */#define HIFN_D_DST_RSIZE HIFN_D_SRC_RSIZE /* destination descriptors *//* * Length values for cryptography */#define HIFN_DES_KEY_LENGTH 8#define HIFN_3DES_KEY_LENGTH 24#define HIFN_MAX_CRYPT_KEY_LENGTH HIFN_3DES_KEY_LENGTH#define HIFN_IV_LENGTH 8#define HIFN_AES_IV_LENGTH 16#define HIFN_MAX_IV_LENGTH HIFN_AES_IV_LENGTH/* * Length values for authentication */#define HIFN_MAC_KEY_LENGTH 64#define HIFN_MD5_LENGTH 16#define HIFN_SHA1_LENGTH 20#define HIFN_MAC_TRUNC_LENGTH 12#define MAX_SCATTER 64/* * Data structure to hold all 4 rings and any other ring related data. */struct hifn_dma { /* * Descriptor rings. We add +1 to the size to accomidate the * jump descriptor. */ struct hifn_desc cmdr[HIFN_D_CMD_RSIZE+1]; struct hifn_desc srcr[HIFN_D_SRC_RSIZE+1]; struct hifn_desc dstr[HIFN_D_DST_RSIZE+1]; struct hifn_desc resr[HIFN_D_RES_RSIZE+1]; struct hifn_command *hifn_commands[HIFN_D_RES_RSIZE]; u_char command_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_COMMAND]; u_char result_bufs[HIFN_D_CMD_RSIZE][HIFN_MAX_RESULT]; u_int32_t slop[HIFN_D_CMD_RSIZE]; u_int64_t test_src, test_dst; /* * Our current positions for insertion and removal from the desriptor * rings. */ int cmdi, srci, dsti, resi; volatile int cmdu, srcu, dstu, resu; int cmdk, srck, dstk, resk;};struct hifn_session { int hs_used; u_int8_t hs_iv[HIFN_MAX_IV_LENGTH];};#define HIFN_RING_SYNC(sc, r, i, f) \ /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */#define HIFN_CMDR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), cmdr, (i), (f))#define HIFN_RESR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), resr, (i), (f))#define HIFN_SRCR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), srcr, (i), (f))#define HIFN_DSTR_SYNC(sc, i, f) HIFN_RING_SYNC((sc), dstr, (i), (f))#define HIFN_CMD_SYNC(sc, i, f) \ /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */#define HIFN_RES_SYNC(sc, i, f) \ /* DAVIDM bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_dmamap, (f)) */typedef int bus_size_t;/* * Holds data specific to a single HIFN board. */struct hifn_softc { struct pci_dev *sc_dev; /* device backpointer */ spinlock_t sc_mtx; /* per-instance lock */ int sc_num; /* for multiple devs */ unsigned long sc_bar0; bus_size_t sc_bar0_lastreg;/* bar0 last reg written */ unsigned long sc_bar1; bus_size_t sc_bar1_lastreg;/* bar1 last reg written */ int sc_irq; u_int32_t sc_dmaier; u_int32_t sc_drammodel; /* 1=dram, 0=sram */ struct hifn_dma *sc_dma; dma_addr_t sc_dma_physaddr;/* physical address of sc_dma */ int sc_dmansegs; int32_t sc_cid; int sc_maxses; int sc_nsessions; struct hifn_session *sc_sessions; int sc_ramsize; int sc_flags;#define HIFN_HAS_RNG 0x1 /* includes random number generator */#define HIFN_HAS_PUBLIC 0x2 /* includes public key support */#define HIFN_HAS_AES 0x4 /* includes AES support */#define HIFN_IS_7811 0x8 /* Hifn 7811 part */#define HIFN_IS_7956 0x10 /* Hifn 7956/7955 don't have SDRAM */ struct timer_list sc_rngto; /* for polling RNG */ struct timer_list sc_tickto; /* for managing DMA */ int sc_rngfirst; int sc_rnghz; /* RNG polling frequency */ int sc_c_busy; /* command ring busy */ int sc_s_busy; /* source data ring busy */ int sc_d_busy; /* destination data ring busy */ int sc_r_busy; /* result ring busy */ int sc_active; /* for initial countdown */ int sc_needwakeup; /* ops q'd wating on resources */ int sc_curbatch; /* # ops submitted w/o int */ int sc_suspended;};#define HIFN_LOCK(_sc) spin_lock_irqsave(&(_sc)->sc_mtx, l_flags)#define HIFN_UNLOCK(_sc) spin_unlock_irqrestore(&(_sc)->sc_mtx, l_flags)/* * hifn_command_t * * This is the control structure used to pass commands to hifn_encrypt(). * * flags * ----- * Flags is the bitwise "or" values for command configuration. A single * encrypt direction needs to be set: * * HIFN_ENCODE or HIFN_DECODE * * To use cryptography, a single crypto algorithm must be included: * * HIFN_CRYPT_3DES or HIFN_CRYPT_DES * * To use authentication is used, a single MAC algorithm must be included: * * HIFN_MAC_MD5 or HIFN_MAC_SHA1 * * By default MD5 uses a 16 byte hash and SHA-1 uses a 20 byte hash. * If the value below is set, hash values are truncated or assumed * truncated to 12 bytes: * * HIFN_MAC_TRUNC * * Keys for encryption and authentication can be sent as part of a command, * or the last key value used with a particular session can be retrieved * and used again if either of these flags are not specified. * * HIFN_CRYPT_NEW_KEY, HIFN_MAC_NEW_KEY * * session_num * ----------- * A number between 0 and 2048 (for DRAM models) or a number between * 0 and 768 (for SRAM models). Those who don't want to use session * numbers should leave value at zero and send a new crypt key and/or * new MAC key on every command. If you use session numbers and * don't send a key with a command, the last key sent for that same * session number will be used. * * Warning: Using session numbers and multiboard at the same time * is currently broken. * * mbuf * ---- * Either fill in the mbuf pointer and npa=0 or * fill packp[] and packl[] and set npa to > 0 * * mac_header_skip * --------------- * The number of bytes of the source_buf that are skipped over before * authentication begins. This must be a number between 0 and 2^16-1 * and can be used by IPsec implementers to skip over IP headers. * *** Value ignored if authentication not used *** * * crypt_header_skip * ----------------- * The number of bytes of the source_buf that are skipped over before * the cryptographic operation begins. This must be a number between 0 * and 2^16-1. For IPsec, this number will always be 8 bytes larger * than the auth_header_skip (to skip over the ESP header). * *** Value ignored if cryptography not used *** * */struct hifn_operand { union {#if 0 struct mbuf *m;#endif struct uio *io; } u; void *map; bus_size_t mapsize; int nsegs; struct { dma_addr_t ds_addr; int ds_len; } segs[MAX_SCATTER];};struct hifn_command { u_int16_t session_num; u_int16_t base_masks, cry_masks, mac_masks; u_int8_t iv[HIFN_MAX_IV_LENGTH], *ck, mac[HIFN_MAC_KEY_LENGTH]; int cklen; int sloplen, slopidx; struct hifn_operand src; struct hifn_operand dst; struct hifn_softc *softc; struct cryptop *crp; struct cryptodesc *enccrd, *maccrd;};#define src_m src.u.m#define src_io src.u.io#define src_map src.map#define src_mapsize src.mapsize#define src_segs src.segs#define src_nsegs src.nsegs#define dst_m dst.u.m#define dst_io dst.u.io#define dst_map dst.map#define dst_mapsize dst.mapsize#define dst_segs dst.segs#define dst_nsegs dst.nsegs/* * Return values for hifn_crypto() */#define HIFN_CRYPTO_SUCCESS 0#define HIFN_CRYPTO_BAD_INPUT (-1)#define HIFN_CRYPTO_RINGS_FULL (-2)/************************************************************************** * * Function: hifn_crypto * * Purpose: Called by external drivers to begin an encryption on the * HIFN board. * * Blocking/Non-blocking Issues * ============================ * The driver cannot block in hifn_crypto (no calls to tsleep) currently. * hifn_crypto() returns HIFN_CRYPTO_RINGS_FULL if there is not enough * room in any of the rings for the request to proceed. * * Return Values * ============= * 0 for success, negative values on error * * Defines for negative error codes are: * * HIFN_CRYPTO_BAD_INPUT : The passed in command had invalid settings. * HIFN_CRYPTO_RINGS_FULL : All DMA rings were full and non-blocking * behaviour was requested. * *************************************************************************//* * Convert back and forth from 'sid' to 'card' and 'session' */#define HIFN_CARD(sid) (((sid) & 0xf0000000) >> 28)#define HIFN_SESSION(sid) ((sid) & 0x000007ff)#define HIFN_SID(crd,ses) (((crd) << 28) | ((ses) & 0x7ff))#endif /* _KERNEL */struct hifn_stats { u_int64_t hst_ibytes; u_int64_t hst_obytes; u_int32_t hst_ipackets; u_int32_t hst_opackets; u_int32_t hst_invalid; u_int32_t hst_nomem; /* malloc or one of hst_nomem_* */ u_int32_t hst_abort; u_int32_t hst_noirq; /* IRQ for no reason */ u_int32_t hst_totbatch; /* ops submitted w/o interrupt */ u_int32_t hst_maxbatch; /* max ops submitted together */ u_int32_t hst_unaligned; /* unaligned src caused copy */ /* * The following divides hst_nomem into more specific buckets. */ u_int32_t hst_nomem_map; /* bus_dmamap_create failed */ u_int32_t hst_nomem_load; /* bus_dmamap_load_* failed */ u_int32_t hst_nomem_mbuf; /* MGET* failed */ u_int32_t hst_nomem_mcl; /* MCLGET* failed */ u_int32_t hst_nomem_cr; /* out of command/result descriptor */ u_int32_t hst_nomem_sd; /* out of src/dst descriptors */};#endif /* __HIFN7751VAR_H__ */
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -