/****************************************************************************/
/*
    文件名  : main.c
    說明    : 跑馬燈測試程序的主文件
    作者    : 天樂
              biggeorge@126.com
    修改歷史:
              02/02/2005                創建
*/
/*****************************************************************************/

#include <string.h>

#include "..\inc\uTypes.h"
#include "..\inc\44b0x.h"
#include "..\inc\console.h"
#include "..\inc\sysUtils.h"
#include "..\inc\rtc.h"

//申明函數
void IoConfig (void);
STATUS RTCTest (void);
int atoi (const char* s);

//我們用這個片編存儲我們的IRQ ISR入口地址
U32 pIrqStart = 0;
U32 pIrqFinish = 0; 
U32 pIrqHandler = 0;

U32 g_pTopOfROM = 0;
U32 g_pBaseOfROM = 0;
U32 g_pBaseOfBSS = 0;
U32 g_pBaseOfZero = 0;
U32 g_pEndOfBSS = 0;

extern U32 GetBaseOfROM (void);
extern U32 GetEndOfROM (void);
extern U32 GetBaseOfBSS (void);
extern U32 GetBaseOfZero (void);
extern U32 GetEndOfBSS (void);

int main(void)
{
  //int i;
  sysUtilsSetPllValue (24, 6, 1);
  IoConfig ();

  console_init (115200);

  printf ("\n\nITSN - 44B0 board Test programe version 1.0.\n\n");

  //熄滅所有的LED燈
  sysUtilsLightLed (LED_ALL, FALSE);
  
  g_pTopOfROM = GetEndOfROM ();
  g_pBaseOfROM = GetBaseOfROM ();
  g_pBaseOfBSS = GetBaseOfBSS ();
  g_pBaseOfZero = GetBaseOfZero ();
  g_pEndOfBSS = GetEndOfBSS ();

#if 0  
  printf ("g_pTopOfROM = 0x%08x.\n", g_pTopOfROM);
  printf ("g_pBaseOfROM = 0x%08x.\n", g_pBaseOfROM);
  printf ("g_pBaseOfBSS = 0x%08x.\n", g_pBaseOfBSS);
  printf ("g_pBaseOfZero = 0x%08x.\n", g_pBaseOfZero);
  printf ("g_pEndOfBSS = 0x%08x.\n", g_pEndOfBSS);  
  
  printf ("&g_pTopOfROM = 0x%08x.\n", &g_pTopOfROM);
  printf ("&g_pBaseOfROM = 0x%08x.\n", &g_pBaseOfROM);
  printf ("&g_pBaseOfBSS = 0x%08x.\n", &g_pBaseOfBSS);

#endif

  RTCTest ();

  //主循環
  for (;;);
  
  return 0;
}

/********************************************************************************
函數名稱: IoConfig
功    能: 初始化IO口
參    數: 無
返回  值: 無
*********************************************************************************/
void IoConfig (void)
{
	// PORT A GROUP
	/*  BIT 9	8	7	6	5	4	3	2	1	0	*/
	/*  A24	  A23	A22	A21	A20	A19	A18	A17	A16	A0	*/	      
	/*  0		1	1	1	1	1	1	1	1	1	*/
	rPCONA = 0x1ff;	

	// PORT B GROUP
	/*  BIT 10	9		8		7		6		5		4		3		2		1		0		*/
	/*	/CS5	/CS4	/CS3	/CS2	/CS1	nWBE3	nWBE2	/SRAS	/SCAS	SCLK	SCKE	*/
	/*	EXT		NIC		8019	IDE		D12		NC		NC		Sdram	Sdram	Sdram	Sdram	*/
	/*	1,		1,   	1,   	1,    	1,    	0,      0,		1,    	1,    	1,   	1       */
	rPDATB = 0x04f;
	rPCONB = 0x3cf;    
    
	//PORT C GROUP
	//BUSWIDTH=16													*/
	/*  PC15	14		13		12		11		10		9		8	*/
	/*	o		o		RXD1	TXD1	o		o		o		o	*/
	/*	NC		NC		Uart1	Uart1	NC		NC		NC		NC	*/
	/*  01		01		11		11		01		01		01		01	*/

	/*  PC7		6		5		4		3		2		1		0	*/
	/*  o		o		o		o		o		o		o		o	*/
	/*  NC		NC		NC		NC		LED		LED		LED		LED	*/
	/*  01		01		01		01		01		01		01		01	*/
	rPDATC = 0x0000;	//All IO is low
	rPCONC = 0x5f555555;	
	rPUPC  = 0x3000;	//PULL UP RESISTOR should be enabled to I/O

	//PORT D GROUP
	/*  PORT D GROUP(I/O OR LCD)										*/
	/*  BIT7		6		5		4		3		2		1		0	*/
	/*  VF			VM		VLINE	VCLK	VD3		VD2		VD1		VD0	*/
	/*	01			01		01		01		01		01		01		01	*/
	rPDATD= 0x55;
	rPCOND= 0xaaaa;	
	rPUPD = 0x00;
	//These pins must be set only after CPU's internal LCD controller is enable
/////////////////////////////////////////////////////	
	//PORT E GROUP 
	/*  Bit 8		7		6		5		4		3		2		1		0		*/
	/*	ENDLAN		o		o		TOU2	o		o		RXD0	TXD0	FOUT	*/ 
	/*  00			01		01		10		01		01		10		10		11		*/	
	rPDATE	= 0x157;				//Beep = 10
	rPCONE	= 0x596b;				
	rPUPE	= 0xff;
	
	//PORT F GROUP
	/*  Bit8		7		6		5		 4		3		2		1		0		*/   
	/*  IISCLK		IISDI	IISDO	IISLRCK	Input	Input	Input	IICSDA	IICSCL	*/
	/*	100			100		100		100		00		00		00		10		10		*/	
	rPDATF = 0x0;
	rPCONF = 0x24900a;	 
	rPUPF  = 0x1d3;

	//PORT G GROUP
	/*  BIT7		6		5		4		3		2		1		0		*/
	/*	EINT7		EINT6	EINT5	EINT4	EINT3	EINT2	EINT1	EINT0	*/
	/*  KEY3		KEY2	KEY1	KEY0	NIC		EXT		IDE		USB		*/
	/*	11 			11      11      11      11      11      11      11		*/
	rPDATG = 0xff;
	rPCONG = 0x0000;
	rPUPG  = 0x00;	//should be enabled  

	rSPUCR= 0x4;//0x7;  //D15-D0 pull-up disable
	//rSPUCR= 0x6;  //D15-D0 pull-up enable
	
	rSYSCFG = 0x0e;				    //使用8K字節的指令緩存,write buffer disable		 
	rNCACHBE0 = 0xc0002000;		//定義非Cache區,從0x2000000到0xbffffff,中斷時進入ROM,若不允許CACHE不正常
	rEXTINT = 0x0;				    //所有的外部硬件中斷為低電平觸發	
}

/********************************************************************************
函數名稱: RTCTest
功    能: RTC實時時鐘測試函數
參    數: 無
返回  值: 無
*********************************************************************************/
STATUS RTCTest (void)
{
  TIME time;
  char cInput;
  char strInput[80];
  rtcShowTime ();

  printf ("Set the current time now? [y/n]");
  cInput = getch ();
  if (('Y' == cInput) || ('y' == cInput))
  {
    putch (cInput);   //回顯
    printf ("\nNow please input the new RTC value:.\n");
    printf ("Year:\t");
    gets (strInput);
    time.wYear      = atoi (strInput);

    printf ("Month:\t");
    gets (strInput);
    time.byMonth    = atoi (strInput);

    printf ("Day:\t");
    gets (strInput);
    time.byDay      = atoi (strInput);

    printf ("Hour:\t");
    gets (strInput);
    time.byHour     = atoi (strInput);

    printf ("Min:\t");
    gets (strInput);
    time.byMin      = atoi (strInput);

    printf ("Sec:\t");
    gets (strInput);
    time.bySec      = atoi (strInput);
    rtcInit (&time);
  }
  printf ("Now you can powered off the board and after a while.\npower up to see the result.\n");  
  return STATUS_OK;
}

int atoi (const char* s)
{
  int i, nStrLen;
  int nRet;
  int nTemp;
  nStrLen = strlen (s);
  if (0 == nStrLen)
    return 0;
  nRet = 0;
  
  for (i = 0; i < nStrLen; ++ i)
  {
    nRet *= 10;
    nTemp = s[i] - '0';
    if ((nTemp > 9) || (nTemp < 0))
    {
      return 0;
    }
    nRet += nTemp;
  }
  return nRet;
}