# Makefile for Zip, ZipNote, ZipCloak and ZipSplit# what you can make ...all:	@echo ''	@echo 'Make what?  You must say what system to make Zip for--e.g.'	@echo '"make bsd".  Choices: generic, 386bsd, 3b1, aix, att6300, aux,'	@echo 'bsd, bsdold, bull, convex, coherent, cray, cray_v3, dec_osf1,'	@echo 'dnix, dynix, hpux, isc, linux, minix, next10, next2x, next3x,'	@echo 'nextfat, pixel, ptx, rs6000, scodos, sgi, sun, sun_gcc, sysv,'	@echo 'sysv_gcc, sysv_386, sys_386_gcc, sysv_old, ultrix, v7, xenix,'	@echo 'xos, zilog.'	@echo 'See the files install.doc and zip.doc for more information.'	@echo ''list:   allMAKE = makeSHELL = /bin/sh# (to use the Gnu compiler, change cc to gcc in CC and BIND)CC = ccBIND = $(CC)E =CPP = /lib/cpp -DSYSV# probably can change this to 'install' if you have itINSTALL = cp# target directories - where to install executables and man pages toBINDIR = /usr/local/binMANDIR = /usr/man/manl# flags#   CFLAGS    flags for C compile#   LFLAGS1   flags after output file spec, before obj file list#   LFLAGS2   flags after obj file list (libraries, etc)CFLAGS = -OLFLAGS1 =LFLAGS2 = -s# object file listsOBJZ = zip.o zipfile.o zipup.o fileio.o util.o globals.o crypt.oOBJI = deflate.o trees.o bits.oOBJA =OBJU = zipfile_.o zipup_.o fileio_.o util_.o globals.oOBJN = zipnote.o  $(OBJU)OBJC = zipcloak.o $(OBJU) crypt_.oOBJS = zipsplit.o $(OBJU)# suffix rules.SUFFIXES:.SUFFIXES: _.o .o .c .doc .1.c_.o:	rm -f $*_.c; ln $< $*_.c	$(CC) $(CFLAGS) -DUTIL -c $*_.c	rm -f $*_.c.c.o:	$(CC) $(CFLAGS) -c $<.1.doc:	nroff -man $< | col -b | uniq > $@# rules for zip, zipnote, zipcloak, zipsplit, and zip.doc.$(OBJZ): zip.h ziperr.h tailor.h$(OBJI): zip.h ziperr.h tailor.h$(OBJN): zip.h ziperr.h tailor.h$(OBJS): zip.h ziperr.h tailor.h$(OBJC): zip.h ziperr.h tailor.hzip.o zipup.o crypt.o bits.o zipup_.o zipcloak.o crypt_.o:  crypt.hmatch.o: match.s	$(CPP) match.s > _match.s	$(CC) -c _match.s	mv _match.o match.o	rm -f _match.sZIPS = zip$E zipnote$E zipsplit$E zipcloak$Ezip.o zipup.o zipnote.o zipcloak.o zipsplit.o: revision.hzips: $(ZIPS)zipsman: zip zipnote zipsplit zipcloak zip.doczip$E: $(OBJZ) $(OBJI) $(OBJA)	$(BIND) -o zip$E $(LFLAGS1) $(OBJZ) $(OBJI) $(OBJA) $(LFLAGS2)zipnote$E: $(OBJN)	$(BIND) -o zipnote$E $(LFLAGS1) $(OBJN) $(LFLAGS2)zipcloak$E: $(OBJC)	$(BIND) -o zipcloak$E $(LFLAGS1) $(OBJC) $(LFLAGS2)zipsplit$E: $(OBJS)	$(BIND) -o zipsplit$E $(LFLAGS1) $(OBJS) $(LFLAGS2)# installinstall:        $(ZIPS)	$(INSTALL) $(ZIPS) $(BINDIR)	$(INSTALL) zip.1 $(MANDIR)/zip.lflags:  configure	sh configure flags# These symbols, when #defined using -D have these effects on compilation:# ZMEM          - includes C language versions of memset(), memcpy(), and#                 memcmp() (util.c).# SYSV          - use <sys/dirent.h> and the library opendir()# DIRENT        - use <sys/dirent.h> and getdents() instead of <sys/dir.h>#                 and opendir(), etc. (fileio.c).# NODIR         - used for 3B1, which has neither getdents() nor opendir().# NDIR          - use "ndir.h" instead of <sys/dir.h> (fileio.c).# UTIL          - select routines for utilities (note, cloak, and split).# PROTO         - enable function prototypes.# RMDIR         - remove directories using a system("rmdir ...") call.# CONVEX        - for Convex make target.# AIX           - for AIX make target.# LINUX         - for linux make target.#               Generic BSD and SysV targets:generic: flags	eval $(MAKE) zips `cat flags`# BSD 4.3 (also Unisys 7000--AT&T System V with heavy BSD 4.2)bsd:	$(MAKE) zips CFLAGS="-O"# BSD, but missing memset(), memcmp().bsdold:	$(MAKE) zips CFLAGS="-O -DZMEM"# AT&T System V, Rel 3.  Also SCO Unix, OpenDeskTop, ETA-10P*, SGI.sysv_old:	$(MAKE) zips CFLAGS="-O -DDIRENT"# AT&T System V, Rel 4. Also any system with readdir() and termio.svr4: sysvsysv:	$(MAKE) zips CFLAGS="-O -DSYSV"sysv_gcc:	$(MAKE) zips CFLAGS="-O2 -DSYSV" CC=gcc# AT&T System V, Rel 4 for 386 (uses asm version):sysv_386:	$(MAKE) zips CFLAGS="-O -DSYSV -DASMV" OBJA=match.osysv_386_gcc:	$(MAKE) zips CFLAGS="-O2 -DSYSV -DASMV" OBJA=match.o CC=gcc#            Specific targets in alphabetical order:# 386BSD 0.1386bsd:	$(MAKE) zips CFLAGS="-O -DASMV" CPP=/usr/bin/cpp OBJA=match.o# AT&T 3B1: System V, but missing a few things.3b1:	$(MAKE) zips CFLAGS="-O -DNODIR -DRMDIR"# AIX Version 3.1 for RISC System/6000 rs6000: aixaix:	$(MAKE) zips CC="c89" BIND="c89" \	   CFLAGS="-O -D_POSIX_SOURCE -D_ALL_SOURCE -D_BSD -DAIX"# AT&T 6300 PLUS (don't know yet how to allocate 64K bytes):att6300:	$(MAKE) zips LFLAGS1="-Ml" \	CFLAGS="-O -Ml -DNODIR -DRMDIR -DDYN_ALLOC -DMEDIUM_MEM -DWSIZE=16384"# A/UX:aux:	$(MAKE) zips CFLAGS="-O -DTERMIO"# Bull DPX/2 - BOS 02.00.69, aka "set 6"bull:	$(MAKE) zips CFLAGS="-O -v -DSYSV"# Coherentcoherent:	$(MAKE) zips CFLAGS="-O -DDIRENT"# Convex C-120, C-210, OS 9.0, cc v. 4.0, no vectorization used.# Do not use -O2, there is a compiler bug.convex:	$(MAKE) zips CFLAGS="-O"# Cray Unicos 5.1.10 & 6.0.11, Standard C compiler 2.0cray:	$(MAKE) zips CFLAGS="-O -DDIRENT" CC="scc"# Cray Unicos 6.1, Standard C compiler 3.0 (all routines except trees.c# may be compiled with vector3; internal compiler bug in 3.0.2.3 and# earlier requires vector2 for trees.c)cray_v3:	$(MAKE) zips CFLAGS="-O -h vector2 -h scalar3 -DDIRENT" CC="scc"# DEC OSF/1dec_osf1:	$(MAKE) zips CFLAGS="-O -Olimit 1000 -DOSF -D_BSD"# DNIX 5.x: like System V but optimization is messed up.# There is a bug in cc for the dnix 5.3 2.2 on the 68030 but this# bug is not pesent dnix 5.3 1.4.3 on 68010. (To be investigated.)dnix:	$(MAKE) zips CFLAGS="-DDIRENT"# DYNIX (R) V3.0.18 (no memset() or memcmp(), rindex() instead of strrchr())# See also ptx entry below.dynix:	$(MAKE) zips CFLAGS="-O -DZMEM -Dstrrchr=rindex"# HPUX: System V, but use <ndir.h> and opendir(), etc.hp:     hpuxhpux:	$(MAKE) zips CFLAGS="-O -DNDIR"# Interactive Systems Corporation System V/386, Rel 3.2--optimizer problemsisc:	$(MAKE) zips CFLAGS="-DDIRENT"# Linux 0.97 with GCC 2.2.2, dies with GCC <= 2.11c. builtin functions are# disabled because '#define const' removes const from normal functions# but not builtin ones. And keeping const causes problems on other systems.linux:	$(MAKE) zips CFLAGS="-O -fno-builtin -DSYSV -DTERMIO -DLINUX" \	  CC=gcc BIND=gcc# MINIX 1.5.10 with Bruce Evans 386 patches and gcc/GNU makeminix:	$(MAKE) zips CFLAGS="-O -DDIRENT -DMINIX -DNO_TERMIO" CC=gcc	chmem =262144 zip# NeXT info.next:	@echo	@echo\ '  Please pick a specific NeXT target:  "make next10" will create a generic'	@echo\ '  NeXT executable; "make next2x" will create a smaller executable (for'	@echo\ '  NeXTstep 2.0 and higher); "make next3x" will create a small executable'	@echo\ '  with significantly better optimization (NeXTstep 3.0 and higher only).'	@echo\ '  "make nextfat" will create a fat executable (NeXTstep 3.1 only).'	@echo# NeXT 1.0: BSD, but use shared library.next10:	$(MAKE) zips CFLAGS="-O" LFLAGS2="-s -lsys_s"# NeXT 2.x: BSD, but use MH_OBJECT format for smaller executables.next2x:	$(MAKE) zips CFLAGS="-O" LFLAGS2="-s -object"# NeXT 3.x: like above, but better optimization.next3x:	$(MAKE) zips CFLAGS="-O2" LFLAGS2="-s -object"# NeXT 3.1: like above, but make executables "fat".nextfat:	$(MAKE) zips CFLAGS="-O2 -arch i386 -arch m68k" \	  LFLAGS2="-arch i386 -arch m68k -s -object"# Pixel Computer 80 or 100.# Old V7 BSD, missing memset(), memcmp(), getdents(), opendir()pixel:  v7v7:	$(MAKE) zips CFLAGS="-O -DNODIR -DRMDIR -DZMEM -Dstrrchr=rindex"# Dynix/ptx 1.3; needs libseq for readlink()ptx:	$(MAKE) zips CFLAGS="-O -DSYSV -DTERMIO" LFLAGS2="-lseq"# SCO 386 cross compile for MS-DOS# Note: zip.exe should be lzexe'd on DOS to reduce its sizescodos:	$(MAKE) zips CFLAGS="-O -Mc -dos -DNO_ASM" LFLAGS1="-Mc -dos" \	 LFLAGS2="-F 1000" E=".exe"# SCO Xenix for 286. Warning: this is untested.sco_x286:	$(MAKE) zips LFLAGS1="-Ml2" CFLAGS="-O -Ml2 -DRMDIR"# Silicon Graphics Indigo with IRIX 4.0.5Fsgi:	$(MAKE) zips CFLAGS="-O2 -DSYSV"# Sun OS 4.x: BSD, but use getdents(). If you have gcc, use 'make sun_gcc'# instead since the code produced is better.sun_bsd:	$(MAKE) zips CFLAGS="-O2 -DDIRENT"# Sun OS 4.x and Solaris. If you have gcc, use 'make sun_gcc'# or (better) 'make mmap_gcc' instead since the code produced is better.sun:	$(MAKE) zips CFLAGS="-O2 -DSYSV"# Sun OS 4.x with gcc (bug with -s linker flag). Use -O if your version# of gcc does not like -O2.sun_gcc:	$(MAKE) zips CFLAGS="-O2 -DSYSV" CC=gcc LFLAGS2=""	strip $(ZIPS)# Ultrixultrix:	$(MAKE) zips CFLAGS="-O -Olimit 1000"# SCO Xenixxenix:	$(MAKE) zips CFLAGS="-O -DSYSV" LFLAGS2="-lx -s"# xos: Olivetti LSX-3005..3045 with X/OS 2.3 or 2.4xos:	$(MAKE) zips CFLAGS="-O -DTERMIO"# zilog zeus 3.21zilog:	$(MAKE) zips CFLAGS="-O -DZMEM -DNDIR -DRMDIR" CC="scc -i" BIND="scc"# clean up after making stuff and installing itclean:	rm -f *.o $(ZIPS) flags# This one's for Mark:it:	$(MAKE) zipsman CFLAGS="-O -Wall -DPROTO"\	LFLAGS2="-s -object" VPATH="${HOME}/Unix/bin"# and these are for Jean-loup:gcc_d:	$(MAKE) zip CFLAGS="-g -DDEBUG -DMMAP -DSYSV" CC=gcc LFLAGS2="-g"	mv zip zipdold_gcc:	$(MAKE) zips CFLAGS="-O -fstrength-reduce -DSYSV" CC=gcc LFLAGS2=""	strip $(ZIPS)big_gcc:	$(MAKE) zips CFLAGS="-O2 -DSYSV -DBIG_MEM -W -Wall" CC=gcc LFLAGS2=""	strip $(ZIPS)mmap_gcc:	$(MAKE) zips CFLAGS="-O2 -DSYSV -DMMAP -W -Wall" CC=gcc LFLAGS2=""	strip $(ZIPS)# end of Makefile