2002-12-19  Theodore A. Roth  <troth@openavr.org>	* configure.in (AM_INIT_AUTOMAKE): Bump version.	* src/Stk500.C: Add struct entry for mega8.2002-12-01  Theodore A. Roth  <troth@openavr.org>	* configure.in (AM_INIT_AUTOMAKE): Reset version to 20021201cvs.2002-12-01  Theodore A. Roth  <troth@openavr.org>	* configure.in (AM_INIT_AUTOMAKE): Cut 20021201 release.2002-11-22  Theodore A. Roth  <troth@openavr.org>(Thanks to Jake McGuire <jake@boom.net> for the patch and porting toMac OS X for use with a USB-to-RS232 dongle.)	* configure.in (AM_INIT_AUTOMAKE): Bump version.	* src/DAPA.C: Make sure the ioport_*() functions are defined in all	cases.	If par_release() isn't available, define it to nothing instead of (0).2002-11-15  Theodore A. Roth  <troth@openavr.org>	* configure.in (AM_INIT_AUTOMAKE): Bump version.	* src/DAPA.C: Use /dev/parport0 as the default interface instead of	direct port access via ioperm(). Using uisp at root or setuid root is	frowned upon so it should not be the default.2002-11-15  Theodore A. Roth  <troth@openavr.org>(Thanks to Christopher X. Candreva <chris@westnet.com> for reporting this.)	* src/Serial.h: Increase serial timeout. Programming 8535 parts with	the stk500 was timing out to early and caused failures. This also seems	to affect the at90s1200 devices (also reported by Klaus Rudolph 	<lts-rudolph@gmx.de>).2002-10-30  Theodore A. Roth  <troth@openavr.org>(Thanks to Seth LaForge <sethml@ofb.net> for pointing out the buffer overflowproblems.)	* configure.in (AM_INIT_AUTOMAKE): Bump version.	* src/Main.C: Add comment about dropping setuid privies.	* src/AvrAtmel.C: Remove unused variables.	* src/Makefile.am: Add -Wall and -Werror compile flags.	* src/MotIntl.C (Htoi): Make sure hex digit is valid.	(UploadMotorola): Increase size of seg_name[] to avoid buffer overflow.	(UploadMotorola): Check for possible read past end of line_buf.	(UploadMotorola): Add case for "S3" records.	(UploadIntel): Check for possible read past end of line_buf.2002-10-29  Theodore A. Roth  <troth@openavr.org>	* doc/srecord.htm: New file (from Marek's site).2002-10-28  Theodore A. Roth  <troth@openavr.org>	* src/Stk500.C: Allow firmware version >= 1.7.2002-10-28  Theodore A. Roth  <troth@openavr.org>	* bootstrap: Check for proper autotools.	* configure.in: Check for autoconf version 2.13.	* config/check_autoconf213.m4: New file.2002-10-28  Theodore A. Roth  <troth@openavr.org>	* configure.in (AM_INIT_AUTOMAKE): Bump version.	Make cvs version rpm compatible.	* src/AvrAtmel.C: Make -dpart more compatible with gcc device names.2002-10-05  Theodore A. Roth  <troth@openavr.org>	* Makefile.am: Add man page.	* configure.in: Ditto.	(AM_INIT_AUTOMAKE): Bump version.	* uisp.1.in: New file. [Thanks to Shaun Jackman <sjackman@shaw.ca>]2002-10-02  Theodore A. Roth  <troth@openavr.org>	* src/Stk500.C: Use struct for programming parameters instead of just	a byte array.	Add tiny26 support.	* src/Stk500.h: Define SPrgParams structure.2002-10-02  Theodore A. Roth  <troth@openavr.org>	* configure.in (AM_INIT_AUTOMAKE): Bump version.	* doc/README.stk500: Add note about specs available from Atmel.2002-08-19  Theodore A. Roth  <troth@openavr.org>	[Patch from Tetsuya Okada <okayan@c-creators.co.jp>]	* configure.in (AM_INIT_AUTOMAKE): Bump version.	* src/DAPA.C: Added Xilinx cable support.	* src/DAPA.h: Added Xilinx cable support.	* src/Main.C: Added Xilinx cable support.	* doc/README.xilinx: New file.2002-07-04  Marek Michalkiewicz  <marekm@amelek.gda.pl>	* src/DAPA.C (OutReset, Init): Fix PAT_BSD bug.2002-06-26  Theodore A. Roth  <troth@openavr.org>	* configure.in (AM_INIT_AUTOMAKE): Update version for release.2002-06-24  Theodore A. Roth  <troth@openavr.org>	* doc/HOWTO.windows: New file. Thanks to Marc Wetzel <mwse@gmx.de>.	* Makefile.am (EXTRA_DIST): Added doc files.2002-06-24  Marek Michalkiewicz  <marekm@amelek.gda.pl>	* configure.in (AM_INIT_AUTOMAKE): Update version.	* pavr/pavr.c: Add ATmega323 support.	* src/AvrAtmel.C (ChipErase): Wait up to 5 seconds for chip erase.	* src/Serial.C (Tx, Rx): Use Info() instead of fprintf() to log	sent and received characters (now enabled at run time with -v=4).	(Send): Accept optional timeout argument, default is 1 second.	* src/Serial.h (DEBUG_LOG_TX, DEBUG_LOG_RX): Remove.	(Send): Update for optional timeout argument.	Thanks to Bryce Denney <bryce@tlw.com> for suggestions.2002-06-13  Marek Michalkiewicz  <marekm@amelek.gda.pl>	* src/DAPA.C (SendRecv): Read MISO just before SCK falling edge,	leaving more room for propagation delays.2002-06-13  Marek Michalkiewicz  <marekm@amelek.gda.pl>	* configure.in (AM_INIT_AUTOMAKE): Update version.	* src/MotIntl.C (UploadIntel): Handle hex record types 3, 4, 5.2002-06-09  Marek Michalkiewicz  <marekm@amelek.gda.pl>	* pavr/pavr.c: Fix to build with latest avr-libc.2002-06-08  Marek Michalkiewicz  <marekm@amelek.gda.pl>	* configure.in (AM_INIT_AUTOMAKE): Update version.	* src/Avr.C (parts): Add ATmega8535 signature bytes.	* src/AvrAtmel.C (prg_part): Update list to match AvrProg 1.37	distributed with AVR Studio 3.54.  Sort by device code.2002-06-03  Theodore A. Roth  <troth@openavr.org>	* configure.in (AM_INIT_AUTOMAKE): Update version.	* src/Avr.h, src/AvrAtmel.C, src/AvrDummy.C, src/Main.C,	  src/Stk500.h:	Implemented the new '--wr_lock' command line option.	* src/Stk500.C:	Implemented WriteLockBits.	Simplified usage of UniversalCmd.	* src/Avr.C, src/AvrAtmel.C, src/AvrDummy.C, src/DAPA.C,	  src/MotIntl.C, src/Serial.C, src/Stk500.C, src/Terminal.C,	  src/cygwinp.C:	Add include for config.h.2002-06-02  Marek Michalkiewicz  <marekm@amelek.gda.pl>	* configure.in (AM_INIT_AUTOMAKE): Update version.	* src/Avr.C, src/DAPA.C, src/Main.C, src/Terminal.C:	Fixes for g++ 3.1 errors.  Please test with older compilers.2002-06-02  Marek Michalkiewicz  <marekm@amelek.gda.pl>	* src/Main.C (main): Fix typo (missing %) in 4 format strings.2002-06-01  Theodore A. Roth  <troth@openavr.org>	* src/Avr.h, src/AvrAtmel.C, src/AvrDummy.C, src/Main.C,	  src/Stk500.C:	Added new command lines options for reading/writing fuses.	Stubbed out code for new lock bit writing implementation.2002-05-30  Theodore A. Roth  <troth@openavr.org>	* configure.in:	Changed version to <date>-cvs.	* src/Stk500.C, src/Stk500.h:	Added functionality to write lock/fuse bits.	* src/Stk500.C, src/Stk500.h:	Added functionality to read lock/fuse/calibration bits.	* src/Terminal.C:	Added space to prompt.	* src/Stk500.C, src/Stk500.h:	Fix write_buffer (separate buffers for flash and eeprom segments).	* src/Stk500.C, src/Stk500.h:	Fix read_buffer (separate buffers for flash and eeprom segments).2002-05-27  Theodore A. Roth  <troth@openavr.org>	* doc/README.stk500:	New file from Jason Kyle.	* TODO:	Remove note about autoconf/automake.	* CHANGES:	Added note about new ChangeLog file.	* AUTHORS:	Added Hamish Moffatt.	* Makefile.am, acconfig.h, bootstrap, config/README, configure.in,	  src/Main.C, src/Makefile, src/Makefile.am:	Conversion to use autoconf/automake for build system.	* uisp.spec.in:	New file.	* AUTHORS:	New file.2002-05-25  marekm  <marekm@amelek.gda.pl>	* CHANGES:	Added notice that uisp is now on savannah, mainly to test CVS	write access.2002-05-25  Theodore A. Roth  <troth@openavr.org>	* CHANGES, CHANGES.old, COPYING, INSTALL, TODO,	  kernel/patch-2.2.17-ppdev1.gz, pavr/Makefile, pavr/pavr.c,	  src/Avr.C, src/Avr.h, src/AvrAtmel.C, src/AvrAtmel.h,	  src/AvrDummy.C, src/AvrDummy.h, src/DAPA.C, src/DAPA.h,	  src/Error.h, src/Global.h, src/Main.C, src/Makefile,	  src/MotIntl.C, src/MotIntl.h, src/Serial.C, src/Serial.h,	  src/Stk500.C, src/Stk500.h, src/Terminal.C, src/Terminal.h,	  src/cygwinp.C, src/cygwinp.h, src/parport.h, src/ppdev.h,	  src/timeradd.h:	Import sources from uisp-20020524.