Naming convention for config files

  LCDConf_<LCD-Controller>_<Display-type><bpp>[A][B][C][I][P][R<degree>][S][X][X<n>][Y][Y<n>][W]_[<Module>]

  <LCD-Controller>  e.g. 13705 or 1565                       #define LCD_CONTROLLER       <LCD-controller>
  <Display-type>    "C" for color passiv
                 or "M" for monochrome
                 or "T" for TFT
  <bpp>          Bits per pixel. Usually 1,2,4,8,15 or 16    #define LCD_BITSPERPIXEL     <bpp>
  [A]            if endian mode does not match               #define LCD_SWAP_BYTE_ORDER  1
  [B]            if byte mode is used on                     #define LCD_BUSWIDTH 8
                 controllers with 16 bit data bus
  [C]            if Com Lookup is used                       #define LCD_LUT_COM0   e.g. 0,1,2,3,4,5,6,7,8,9 ...
  [I]            Invert                                      #define LCD_REVERSE    1
  [P]            if Palette is used                          #define LCD_PHYSCOLORS e.g. 0x000000,0x000080, ...
  [R90]          if hardware rotates 90