?? bsp.h
字號:
/**********************************************************************
* $Id$ bsp.h 2011-06-02
*//**
* @file bsp.h
* @brief Contains basic information about the board that can
* be using with the current code package. It may
* include some header file for the components mounted
* on the board. Or else some neccessary hardware (IOs)
* settings for the using board may be involved.
* @version 1.0
* @date 02. June. 2011
* @author NXP MCU SW Application Team
*
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
**********************************************************************/
/* Peripheral group ----------------------------------------------------------- */
/** @defgroup BoardSupport Board Support
* @ingroup LPC177x_8xCMSIS_Board_Support
* @{
*/
#ifndef __BSP_H
#define __BSP_H
#include "phylan_dp83848c.h"
//List the board that have been supported
/** Default board */
#define _DEFAULT_BOARD (0)
/** LPC1788 OEM board connects with QVGA base board v1.2 */
#define _QVGA_BOARD (1)
/** LPC1788 OEM Board rev A and OEM Base Board rev A */
#define _EA_PA_BOARD (2)
/** LPC1788 IAR Start Kit Rev.B */
#define _IAR_OLIMEX_BOARD (3)
/** LPC1788 Embest Rev.A */
#define _EMBEST_BOARD (4)
/** Current using board definition */
#define _CURR_USING_BRD _IAR_OLIMEX_BOARD
//List the mini USB that have been supported
#define USBInterface1 (1) //CON16
#define USBInterface2 (2) //CON18
#define USBType USBInterface1 //Choose of mini USB interface
//List the NandFlash that have been supported
#define _RUNNING_NANDFLASH_NONE (0)
#define _RUNNING_NANDFLASH_K9F1G08U0C (1)
#define _RUNNING_NANDFLASH_K9F1G08U0A (2)
#define _CUR_USING_NANDFLASH (_RUNNING_NANDFLASH_K9F1G08U0C)
#if (_CURR_USING_BRD == _QVGA_BOARD)
//Driver for PHY of LAN DP83848C IC
#include "phylan_dp83848c.h"
//ADC input preset on this board
#define BRD_ADC_PREPARED_CHANNEL (ADC_CHANNEL_2)
#define BRD_ADC_PREPARED_INTR (ADC_ADINTEN2)
#define BRD_ADC_PREPARED_CH_PORT (0)
#define BRD_ADC_PREPARED_CH_PIN (25)
#define BRD_ADC_PREPARED_CH_FUNC_NO (1)
//LED indicators preset
#define BRD_LED_1_CONNECTED_PORT (1)
#define BRD_LED_1_CONNECTED_PIN (13)
#define BRD_LED_1_CONNECTED_MASK (1 << BRD_LED_1_CONNECTED_PIN)
#define BRD_LED_2_CONNECTED_PORT (0)
#define BRD_LED_2_CONNECTED_PIN (13)
#define BRD_LED_2_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
//PIO interrupt preset
#define BRD_PIO_USED_INTR_PORT (0)
#define BRD_PIO_USED_INTR_PIN (25)
#define BRD_PIO_USED_INTR_MASK (1 << BRD_PIO_USED_INTR_PIN)
//MCI power active levell
#define BRD_MCI_POWERED_ACTIVE_LEVEL (0)
//Timer preset
#define BRD_TIMER_USED (LPC_TIM0)
#define BRD_TIM_INTR_USED (TIMER0_IRQn)
#define BRD_TIM_CAP_LINKED_PORT (1)
#define BRD_TIM_CAP_LINKED_PIN (26)
// NandFlash preset
#define _CUR_USING_NANDFLASH (_RUNNING_NANDFLASH_K9F1G08U0A)
#endif
#if (_CURR_USING_BRD == _EA_PA_BOARD)
//Driver for PHY of LAN LAN8720 IC
//#include "phylan_lan8720.h"
//ADC input preset on this board
#define BRD_ADC_PREPARED_CHANNEL (ADC_CHANNEL_2)
#define BRD_ADC_PREPARED_INTR (ADC_ADINTEN2)
#define BRD_ADC_PREPARED_CH_PORT (0)
#define BRD_ADC_PREPARED_CH_PIN (25)
#define BRD_ADC_PREPARED_CH_FUNC_NO (1)
//LED indicators preset
#define BRD_LED_1_CONNECTED_PORT (1)
#define BRD_LED_1_CONNECTED_PIN (18)
#define BRD_LED_1_CONNECTED_MASK (1 << BRD_LED_1_CONNECTED_PIN)
#define BRD_LED_2_CONNECTED_PORT (0)
#define BRD_LED_2_CONNECTED_PIN (13)
#define BRD_LED_2_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
//PIO interrupt preset
#define BRD_PIO_USED_INTR_PORT (0)
#define BRD_PIO_USED_INTR_PIN (25)
#define BRD_PIO_USED_INTR_MASK (1 << BRD_PIO_USED_INTR_PIN)
//MCI power active levell
#define BRD_MCI_POWERED_ACTIVE_LEVEL (0)
//Timer preset
#define BRD_TIMER_USED (LPC_TIM0)
#define BRD_TIM_INTR_USED (TIMER0_IRQn)
#define BRD_TIM_CAP_LINKED_PORT (1)
#define BRD_TIM_CAP_LINKED_PIN (26)
// NandFlash preset
#define _CUR_USING_NANDFLASH (_RUNNING_NANDFLASH_K9F1G08U0C)
#endif
#if (_CURR_USING_BRD == _IAR_OLIMEX_BOARD)
//Driver for PHY of LAN KS8721B IC
//#include "phylan_ks8721b.h"
//ADC input preset on this board
#define BRD_ADC_PREPARED_CHANNEL (ADC_CHANNEL_7)
#define BRD_ADC_PREPARED_INTR (ADC_ADINTEN7)
#define BRD_ADC_PREPARED_CH_PORT (0)
#define BRD_ADC_PREPARED_CH_PIN (13)
#define BRD_ADC_PREPARED_CH_FUNC_NO (3)
//LED indicators preset
#define BRD_LED_1_CONNECTED_PORT (1)
#define BRD_LED_1_CONNECTED_PIN (18)
#define BRD_LED_1_CONNECTED_MASK (1 << BRD_LED_1_CONNECTED_PIN)
#define BRD_LED_2_CONNECTED_PORT (0)
#define BRD_LED_2_CONNECTED_PIN (13)
#define BRD_LED_2_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
//PIO interrupt preset
#define BRD_PIO_USED_INTR_PORT (0)
#define BRD_PIO_USED_INTR_PIN (25)
#define BRD_PIO_USED_INTR_MASK (1 << BRD_PIO_USED_INTR_PIN)
//MCI power active levell
#define BRD_MCI_POWERED_ACTIVE_LEVEL (1)
//Timer preset
#define BRD_TIMER_USED (LPC_TIM2)
#define BRD_TIM_INTR_USED (TIMER2_IRQn)
#define BRD_TIM_CAP_LINKED_PORT (0)
#define BRD_TIM_CAP_LINKED_PIN (4)
#endif
#if (_CURR_USING_BRD == _EMBEST_BOARD)
//Driver for PHY of LAN DP83848C IC
#include "phylan_dp83848c.h"
//ADC input preset on this board
#define BRD_ADC_PREPARED_CHANNEL (ADC_CHANNEL_2)
#define BRD_ADC_PREPARED_INTR (ADC_ADINTEN2)
#define BRD_ADC_PREPARED_CH_PORT (0)
#define BRD_ADC_PREPARED_CH_PIN (25)
#define BRD_ADC_PREPARED_CH_FUNC_NO (1)
//LED indicators preset
#define BRD_LED_1_CONNECTED_PORT (3)
#define BRD_LED_1_CONNECTED_PIN (23)
#define BRD_LED_1_CONNECTED_MASK (1 << BRD_LED_1_CONNECTED_PIN)
#define BRD_LED_2_CONNECTED_PORT (3)
#define BRD_LED_2_CONNECTED_PIN (24)
#define BRD_LED_2_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
#define BRD_LED_3_CONNECTED_PORT (3)
#define BRD_LED_3_CONNECTED_PIN (25)
#define BRD_LED_3_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
#define BRD_LED_4_CONNECTED_PORT (3)
#define BRD_LED_4_CONNECTED_PIN (26)
#define BRD_LED_4_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
#define BRD_LED_5_CONNECTED_PORT (3)
#define BRD_LED_5_CONNECTED_PIN (27)
#define BRD_LED_5_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
#define BRD_LED_6_CONNECTED_PORT (3)
#define BRD_LED_6_CONNECTED_PIN (28)
#define BRD_LED_6_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
#define BRD_LED_7_CONNECTED_PORT (3)
#define BRD_LED_7_CONNECTED_PIN (29)
#define BRD_LED_7_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
#define BRD_LED_8_CONNECTED_PORT (3)
#define BRD_LED_8_CONNECTED_PIN (31)
#define BRD_LED_8_CONNECTED_MASK (1 << BRD_LED_2_CONNECTED_PIN)
//PIO interrupt preset
#define BRD_PIO_USED_INTR_PORT (0)
#define BRD_PIO_USED_INTR_PIN (13)
#define BRD_PIO_USED_INTR_MASK (1 << BRD_PIO_USED_INTR_PIN)
//MCI power active levell
#define BRD_MCI_POWERED_ACTIVE_LEVEL (1)
//Timer preset
#define BRD_TIMER_USED (LPC_TIM2)
#define BRD_TIM_INTR_USED (TIMER2_IRQn)
#define BRD_TIM_CAP_LINKED_PORT (0)
#define BRD_TIM_CAP_LINKED_PIN (4)
#endif
#endif//BSP_H
/**
* @}
*/
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -