### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.a*; *.src)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (usb_book), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(philips_usb),1,0,0

OPTFFF 1,1,1,0,0,0,0,0,<.\Protodma.c><Protodma.c> 
OPTFFF 1,2,1,0,0,0,0,0,<.\D12ci.c><D12ci.c> 
OPTFFF 1,3,1,0,0,0,0,0,<.\Epphal.c><Epphal.c> 
OPTFFF 1,4,1,0,0,0,0,0,<.\Isr.c><Isr.c> 
OPTFFF 1,5,1,67108864,0,382,382,0,<.\Mainloop.c><Mainloop.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,0,0,0,0,0,0,0,0,233,2,0,0,220,0,0,0 }
OPTFFF 1,6,1,0,0,0,0,0,<.\Chap_9.c><Chap_9.c> 

ExtF <.\MAINLOOP.H> 179,179,0,{ 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,22,0,0,0,22,0,0,0,212,2,0,0,71,1,0,0 }

TARGOPT 1, (usb_book)
 CLK51=33000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\PHILIPS\89C51Rx2.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Programmer's Guide & Instruction Set Manual)<DATASHTS\PHILIPS\UPROGGUI.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p51R2)(S8051.DLL)()(TP51.DLL)(-p51R2)
  OPTDBG 49150,3,()()()()()()()()()() ()()()()
  OPTKEY 0,(DLGTP51)((98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=-1,-1,-1,-1,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(99=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0)(94=-1,-1,-1,-1,0)(95=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(5023=-1,-1,-1,-1,0))
  OPTKEY 0,(SampTarg)(-S1 -B57600 -D0 -I0 -X0 -C1 -E72 -M0)
  OPTWA 0,1,(MCU_A0)
  OPTWA 1,1,(b1)
  OPTWA 2,1,(j)
  OPTMM 1,0,(x:00)
  OPTDF 0x84
  OPTLE <>
  OPTLC <>
EndOpt