?? gui.plg
字號:
<html>
<body>
<pre>
<h1>礦ision Build Log</h1>
<h2>Project:</h2>
F:\STM32gui\STM GUI mdkPJT\GUI.uvproj
Project File Date: 06/05/2012
<h2>Output:</h2>
Build target 'Target 1'
compiling system_stm32f10x.c...
compiling main.c...
User\main.c(225): warning: #177-D: variable "RectFillStructure" was declared but never referenced
User\main.c: tRectangle RectFillStructure;
User\main.c: ^
User\main.c: User\main.c: 1 warning, 0 errors
linking...
Program Size: Code=15744 RO-data=10604 RW-data=556 ZI-data=1452
"GUI.axf" - 0 Error(s), 1 Warning(s).
Load "F:\\STM32gui\\STM GUI mdkPJT\\GUI.AXF"
Set JLink Project File to "F:\STM32gui\STM GUI mdkPJT\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
Target info:
------------
Device: STM32F103VE
VTarget = 3.222V
State of Pins:
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 4
JTAG speed: 2000 kHz
Full Chip Erase Done.
Programming Done.
Verify OK.
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Load "F:\\STM32gui\\STM GUI mdkPJT\\GUI.AXF"
Set JLink Project File to "F:\STM32gui\STM GUI mdkPJT\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
Target info:
------------
Device: STM32F103VE
VTarget = 3.222V
State of Pins:
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 4
JTAG speed: 2000 kHz
Full Chip Erase Done.
Programming Done.
Verify OK.
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Build target 'Target 1'
compiling system_stm32f10x.c...
compiling main.c...
User\main.c(141): error: #144: a value of type "int" cannot be used to initialize an entity of type "const unsigned char *"
User\main.c: RectangularButton(g_sPushBtn_OK, &g_sBackground, 0, 0,
User\main.c: ^
User\main.c(253): warning: #177-D: variable "RectFillStructure" was declared but never referenced
User\main.c: tRectangle RectFillStructure;
User\main.c: ^
User\main.c: User\main.c: 1 warning, 1 error
Target not created
Build target 'Target 1'
compiling system_stm32f10x.c...
compiling main.c...
User\main.c(253): warning: #177-D: variable "RectFillStructure" was declared but never referenced
User\main.c: tRectangle RectFillStructure;
User\main.c: ^
User\main.c: User\main.c: 1 warning, 0 errors
linking...
Program Size: Code=15744 RO-data=10612 RW-data=876 ZI-data=1452
"GUI.axf" - 0 Error(s), 1 Warning(s).
Load "F:\\STM32gui\\STM GUI mdkPJT\\GUI.AXF"
Set JLink Project File to "F:\STM32gui\STM GUI mdkPJT\JLinkSettings.ini"
JLink info:
------------
DLL: V4.15n, compiled Jun 18 2010 19:55:09
Firmware: J-Link ARM V8 compiled May 20 2010 17:07:46
Hardware: V8.00
S/N : 20100214
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
ROMTableAddr = 0xE00FF003
Target info:
------------
Device: STM32F103VE
VTarget = 3.215V
State of Pins:
TCK: 1, TDI: 0, TDO: 0, TMS: 0, TRES: 1, TRST: 1
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 4
JTAG speed: 2000 kHz
Full Chip Erase Done.
Programming Done.
Verify OK.
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
Application running ...
Load "F:\\STM32gui\\STM GUI mdkPJT\\GUI.AXF"
Set JLink Project File to "F:\STM32gui\STM GUI mdkPJT\JLinkSettings.ini"
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -