/**
  ******************************************************************************
  * @file    stm32l1xx_i2c.h
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    31-December-2010
  * @brief   This file contains all the functions prototypes for the I2C firmware 
  *          library.
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
  ******************************************************************************  
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L1xx_I2C_H
#define __STM32L1xx_I2C_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32l1xx.h"

/** @addtogroup STM32L1xx_StdPeriph_Driver
  * @{
  */

/** @addtogroup I2C
  * @{
  */

/* Exported types ------------------------------------------------------------*/

/** 
  * @brief  I2C Init structure definition  
  */

typedef struct
{
  uint32_t I2C_ClockSpeed;          /*!< Specifies the clock frequency.
                                         This parameter must be set to a value lower than 400kHz */

  uint16_t I2C_Mode;                /*!< Specifies the I2C mode.
                                         This parameter can be a value of @ref I2C_mode */

  uint16_t I2C_DutyCycle;           /*!< Specifies the I2C fast mode duty cycle.
                                         This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */

  uint16_t I2C_OwnAddress1;         /*!< Specifies the first device own address.
                                         This parameter can be a 7-bit or 10-bit address. */

  uint16_t I2C_Ack;                 /*!< Enables or disables the acknowledgement.
                                         This parameter can be a value of @ref I2C_acknowledgement */

  uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
                                         This parameter can be a value of @ref I2C_acknowledged_address */
}I2C_InitTypeDef;

/* Exported constants --------------------------------------------------------*/


/** @defgroup I2C_Exported_Constants
  * @{
  */

#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
                                   ((PERIPH) == I2C2))
/** @defgroup I2C_mode 
  * @{
  */

#define I2C_Mode_I2C                    ((uint16_t)0x0000)
#define I2C_Mode_SMBusDevice            ((uint16_t)0x0002)  
#define I2C_Mode_SMBusHost              ((uint16_t)0x000A)
#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
                           ((MODE) == I2C_Mode_SMBusDevice) || \
                           ((MODE) == I2C_Mode_SMBusHost))
/**
  * @}
  */

/** @defgroup I2C_duty_cycle_in_fast_mode 
  * @{
  */

#define I2C_DutyCycle_16_9              ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */
#define I2C_DutyCycle_2                 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */
#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
                                  ((CYCLE) == I2C_DutyCycle_2))
/**
  * @}
  */ 

/** @defgroup I2C_acknowledgement
  * @{
  */

#define I2C_Ack_Enable                  ((uint16_t)0x0400)
#define I2C_Ack_Disable                 ((uint16_t)0x0000)
#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
                                 ((STATE) == I2C_Ack_Disable))
/**
  * @}
  */

/** @defgroup I2C_transfer_direction 
  * @{
  */

#define  I2C_Direction_Transmitter      ((uint8_t)0x00)
#define  I2C_Direction_Receiver         ((uint8_t)0x01)
#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
                                     ((DIRECTION) == I2C_Direction_Receiver))
/**
  * @}
  */

/** @defgroup I2C_acknowledged_address 
  * @{
  */

#define I2C_AcknowledgedAddress_7bit    ((uint16_t)0x4000)
#define I2C_AcknowledgedAddress_10bit   ((uint16_t)0xC000)
#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
                                             ((ADDRESS) == I2C_AcknowledgedAddress_10bit))
/**
  * @}
  */ 

/** @defgroup I2C_registers 
  * @{
  */

#define I2C_Register_CR1                ((uint8_t)0x00)
#define I2C_Register_CR2                ((uint8_t)0x04)
#define I2C_Register_OAR1               ((uint8_t)0x08)
#define I2C_Register_OAR2               ((uint8_t)0x0C)
#define I2C_Register_DR                 ((uint8_t)0x10)
#define I2C_Register_SR1                ((uint8_t)0x14)
#define I2C_Register_SR2                ((uint8_t)0x18)
#define I2C_Register_CCR                ((uint8_t)0x1C)
#define I2C_Register_TRISE              ((uint8_t)0x20)
#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
                                   ((REGISTER) == I2C_Register_CR2) || \
                                   ((REGISTER) == I2C_Register_OAR1) || \
                                   ((REGISTER) == I2C_Register_OAR2) || \
                                   ((REGISTER) == I2C_Register_DR) || \
                                   ((REGISTER) == I2C_Register_SR1) || \
                                   ((REGISTER) == I2C_Register_SR2) || \
                                   ((REGISTER) == I2C_Register_CCR) || \
                                   ((REGISTER) == I2C_Register_TRISE))
/**
  * @}
  */

/** @defgroup I2C_SMBus_alert_pin_level 
  * @{
  */

#define I2C_SMBusAlert_Low              ((uint16_t)0x2000)
#define I2C_SMBusAlert_High             ((uint16_t)0xDFFF)
#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
                                   ((ALERT) == I2C_SMBusAlert_High))
/**
  * @}
  */

/** @defgroup I2C_PEC_position 
  * @{
  */

#define I2C_PECPosition_Next            ((uint16_t)0x0800)
#define I2C_PECPosition_Current         ((uint16_t)0xF7FF)
#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
                                       ((POSITION) == I2C_PECPosition_Current))
/**
  * @}
  */ 

/** @defgroup I2C_interrupts_definition 
  * @{
  */

#define I2C_IT_BUF                      ((uint16_t)0x0400)
#define I2C_IT_EVT                      ((uint16_t)0x0200)
#define I2C_IT_ERR                      ((uint16_t)0x0100)
#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00))
/**
  * @}
  */ 

/** @defgroup I2C_interrupts_definition 
  * @{
  */

#define I2C_IT_SMBALERT                 ((uint32_t)0x01008000)
#define I2C_IT_TIMEOUT                  ((uint32_t)0x01004000)
#define I2C_IT_PECERR                   ((uint32_t)0x01001000)
#define I2C_IT_OVR                      ((uint32_t)0x01000800)
#define I2C_IT_AF                       ((uint32_t)0x01000400)
#define I2C_IT_ARLO                     ((uint32_t)0x01000200)
#define I2C_IT_BERR                     ((uint32_t)0x01000100)
#define I2C_IT_TXE                      ((uint32_t)0x06000080)
#define I2C_IT_RXNE                     ((uint32_t)0x06000040)
#define I2C_IT_STOPF                    ((uint32_t)0x02000010)
#define I2C_IT_ADD10                    ((uint32_t)0x02000008)
#define I2C_IT_BTF                      ((uint32_t)0x02000004)
#define I2C_IT_ADDR                     ((uint32_t)0x02000002)
#define I2C_IT_SB                       ((uint32_t)0x02000001)

#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00))

#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
                           ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
                           ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
                           ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
                           ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
                           ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
                           ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
/**