/**
  ******************************************************************************
  * @file    stm32l1xx_adc.c
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    31-December-2010
  * @brief   This file provides firmware functions to manage the following 
  *          functionalities of the Analog to Digital Convertor (ADC) peripheral:           
  *           - Initialization and Configuration
  *           - Power saving
  *           - Analog Watchdog configuration              
  *           - Temperature Sensor & Vrefint (Voltage Reference internal) management 
  *           - Regular Channels Configuration
  *           - Regular Channels DMA Configuration
  *           - Injected channels Configuration      
  *           - Interrupts and flags management       
  *         
  *  @verbatim
  *                               
  *          ===================================================================      
  *                                   How to use this driver
  *          ===================================================================          
  *            - Configure the ADC Prescaler, conversion resolution and data 
  *              alignment using the ADC_Init() function.
  *            - Activate the ADC peripheral using ADC_Cmd() function.  
  *
  *          Regular channels group configuration
  *          ====================================    
  *            - To configure the ADC regular channels group features, use 
  *              ADC_Init() and ADC_RegularChannelConfig() functions.
  *            - To activate the continuous mode, use the ADC_continuousModeCmd()
  *              function.
  *            - To configurate and activate the Discontinuous mode, use the 
  *              ADC_DiscModeChannelCountConfig() and ADC_DiscModeCmd() functions.        
  *            - To read the ADC converted values, use the ADC_GetConversionValue()
  *              function.
  *
  *          DMA for Regular channels group features configuration
  *          ====================================================== 
  *           - To enable the DMA mode for regular channels group, use the 
  *             ADC_DMACmd() function.
  *           - To enable the generation of DMA requests continuously at the end
  *             of the last DMA transfer, use the ADC_DMARequestAfterLastTransferCmd() 
  *             function.    
             
  *          Injected channels group configuration
  *          =====================================    
  *            - To configure the ADC Injected channels group features, use 
  *              ADC_InjectedChannelConfig() and  ADC_InjectedSequencerLengthConfig()
  *              functions.
  *            - To activate the continuous mode, use the ADC_continuousModeCmd()
  *              function.
  *            - To activate the Injected Discontinuous mode, use the 
  *              ADC_InjectedDiscModeCmd() function.  
  *            - To activate the AutoInjected mode, use the ADC_AutoInjectedConvCmd() 
  *              function.        
  *            - To read the ADC converted values, use the ADC_GetInjectedConversionValue() 
  *              function.
  *              
  *  @endverbatim
  *         
  ******************************************************************************
  * @attention
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
  ******************************************************************************  
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32l1xx_adc.h"
#include "stm32l1xx_rcc.h"

/** @addtogroup STM32L1xx_StdPeriph_Driver
  * @{
  */

/** @defgroup ADC 
  * @brief ADC driver modules
  * @{
  */

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* ADC DISCNUM mask */
#define CR1_DISCNUM_RESET         ((uint32_t)0xFFFF1FFF)
   
/* ADC AWDCH mask */
#define CR1_AWDCH_RESET           ((uint32_t)0xFFFFFFE0) 
  
/* ADC Analog watchdog enable mode mask */
#define CR1_AWDMODE_RESET         ((uint32_t)0xFF3FFDFF)
  
/* CR1 register Mask */
#define CR1_CLEAR_MASK            ((uint32_t)0xFCFFFEFF) 
   
/* ADC DELAY mask */            
#define CR2_DELS_RESET            ((uint32_t)0xFFFFFF0F)
   
/* ADC JEXTEN mask */
#define CR2_JEXTEN_RESET          ((uint32_t)0xFFCFFFFF)
  
/* ADC JEXTSEL mask */
#define CR2_JEXTSEL_RESET         ((uint32_t)0xFFF0FFFF)
  
/* CR2 register Mask */
#define CR2_CLEAR_MASK            ((uint32_t)0xC0FFF7FD)

/* ADC SQx mask */
#define SQR5_SQ_SET               ((uint32_t)0x0000001F)  
#define SQR4_SQ_SET               ((uint32_t)0x0000001F)  
#define SQR3_SQ_SET               ((uint32_t)0x0000001F)  
#define SQR2_SQ_SET               ((uint32_t)0x0000001F)  
#define SQR1_SQ_SET               ((uint32_t)0x0000001F)

/* ADC L Mask */
#define SQR1_L_RESET              ((uint32_t)0xFE0FFFFF) 

/* ADC JSQx mask */
#define JSQR_JSQ_SET              ((uint32_t)0x0000001F) 
 
/* ADC JL mask */
#define JSQR_JL_SET               ((uint32_t)0x00300000) 
#define JSQR_JL_RESET             ((uint32_t)0xFFCFFFFF) 

/* ADC SMPx mask */
#define SMPR1_SMP_SET             ((uint32_t)0x00000007)  
#define SMPR2_SMP_SET             ((uint32_t)0x00000007)
#define SMPR3_SMP_SET             ((uint32_t)0x00000007) 

/* ADC JDRx registers offset */
#define JDR_OFFSET                ((uint8_t)0x30)   
  
/* ADC CCR register Mask */
#define CR_CLEAR_MASK             ((uint32_t)0xFFFCFFFF) 

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/** @defgroup ADC_Private_Functions
  * @{
  */

/** @defgroup ADC_Group1 Initialization and Configuration functions
 *  @brief   Initialization and Configuration functions 
 *
@verbatim    
 ===============================================================================
                      Initialization and Configuration functions
 ===============================================================================  
  This section provides functions allowing to:
   - Initialize and configure the ADC Prescaler
   - ADC Conversion Resolution (12bit..6bit)
   - Scan Conversion Mode (multichannels or one channel) for regular group
   - ADC Continuous Conversion Mode (Continuous or Single conversion) for regular group
   - External trigger Edge and source of regular group, 
   - Converted data alignment (left or right)
   - The number of ADC conversions that will be done using the sequencer for regular channel group
   - Enable or disable the ADC peripheral
   
@endverbatim
  * @{
  */

/**
  * @brief  Deinitializes ADC1 peripheral registers to their default reset values.
  * @param  None
  * @retval None
  */
void ADC_DeInit(ADC_TypeDef* ADCx)
{
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  
  /* Enable ADC1 reset state */
  RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE);
  /* Release ADC1 from reset state */
  RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE);
}

/**
  * @brief  Initializes the ADCx peripheral according to the specified parameters
  *         in the ADC_InitStruct.
  * @note   This function is used to configure the global features of the ADC ( 
  *         Resolution and Data Alignment), however, the rest of the configuration
  *         parameters are specific to the regular channels group (scan mode 
  *         activation, continuous mode activation, External trigger source and 
  *         edge, number of conversion in the regular channels group sequencer).   
  * @param  ADCx: where x can be 1 to select the ADC peripheral.
  * @param  ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains 
  *         the configuration information for the specified ADC peripheral.
  * @retval None
  */
void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)               
{
  uint32_t tmpreg1 = 0;
  uint8_t tmpreg2 = 0;
  
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  assert_param(IS_ADC_RESOLUTION(ADC_InitStruct->ADC_Resolution)); 
  assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode));
  assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); 
  assert_param(IS_ADC_EXT_TRIG_EDGE(ADC_InitStruct->ADC_ExternalTrigConvEdge)); 
  assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv));    
  assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); 
  assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfConversion));
  
  /*---------------------------- ADCx CR1 Configuration -----------------*/
  /* Get the ADCx CR1 value */
  tmpreg1 = ADCx->CR1;
  /* Clear RES and SCAN bits */ 
  tmpreg1 &= CR1_CLEAR_MASK;
  /* Configure ADCx: scan conversion mode and resolution */
  /* Set SCAN bit according to ADC_ScanConvMode value */
  /* Set RES bit according to ADC_Resolution value */ 
  tmpreg1 |= (uint32_t)(((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8) | ADC_InitStruct->ADC_Resolution);
  /* Write to ADCx CR1 */
  ADCx->CR1 = tmpreg1;
  
  /*---------------------------- ADCx CR2 Configuration -----------------*/
  /* Get the ADCx CR2 value */
  tmpreg1 = ADCx->CR2;
  /* Clear CONT, ALIGN, EXTEN and EXTSEL bits */
  tmpreg1 &= CR2_CLEAR_MASK;
  /* Configure ADCx: external trigger event and edge, data alignment and continuous conversion mode */
  /* Set ALIGN bit according to ADC_DataAlign value */
  /* Set EXTEN bits according to ADC_ExternalTrigConvEdge value */ 
  /* Set EXTSEL bits according to ADC_ExternalTrigConv value */
  /* Set CONT bit according to ADC_ContinuousConvMode value */
  tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | 
              ADC_InitStruct->ADC_ExternalTrigConvEdge | ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1));
  /* Write to ADCx CR2 */
  ADCx->CR2 = tmpreg1;
  
  /*---------------------------- ADCx SQR1 Configuration -----------------*/
  /* Get the ADCx SQR1 value */
  tmpreg1 = ADCx->SQR1;
  /* Clear L bits */
  tmpreg1 &= SQR1_L_RESET;
  /* Configure ADCx: regular channel sequence length */
  /* Set L bits according to ADC_NbrOfConversion value */ 
  tmpreg2 |= (uint8_t)(ADC_InitStruct->ADC_NbrOfConversion - (uint8_t)1);
  tmpreg1 |= ((uint32_t)tmpreg2 << 20);
  /* Write to ADCx SQR1 */
  ADCx->SQR1 = tmpreg1;
}

/**
  * @brief  Fills each ADC_InitStruct member with its default value.
  * @note   This function is used to initialize the global features of the ADC ( 
  *         Resolution and Data Alignment), however, the rest of the configuration
  *         parameters are specific to the regular channels group (scan mode 
  *         activation, continuous mode activation, External trigger source and 
  *         edge, number of conversion in the regular channels group sequencer).   
  * @param  ADC_InitStruct: pointer to an ADC_InitTypeDef structure which will 
  *         be initialized.
  * @retval None
  */
void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct)                            
{
  /* Reset ADC init structure parameters values */
  /* Initialize the ADC_Resolution member */
  ADC_InitStruct->ADC_Resolution = ADC_Resolution_12b;

  /* Initialize the ADC_ScanConvMode member */
  ADC_InitStruct->ADC_ScanConvMode = DISABLE;

  /* Initialize the ADC_ContinuousConvMode member */
  ADC_InitStruct->ADC_ContinuousConvMode = DISABLE;

  /* Initialize the ADC_ExternalTrigConvEdge member */
  ADC_InitStruct->ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None;

  /* Initialize the ADC_ExternalTrigConv member */
  ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T2_CC2;

  /* Initialize the ADC_DataAlign member */
  ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right;

  /* Initialize the ADC_NbrOfConversion member */
  ADC_InitStruct->ADC_NbrOfConversion = 1;
}

/**
  * @brief  Initializes the ADCs peripherals according to the specified parameters
  *          in the ADC_CommonInitStruct.
  * @param  ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure 
  *         that contains the configuration information (Prescaler) for ADC1 peripheral.
  * @retval None
  */
void ADC_CommonInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct)                           
{
  uint32_t tmpreg = 0;
  
  /* Check the parameters */
  assert_param(IS_ADC_PRESCALER(ADC_CommonInitStruct->ADC_Prescaler));

  /*---------------------------- ADC CCR Configuration -----------------*/
  /* Get the ADC CCR value */
  tmpreg = ADC->CCR;

  /* Clear ADCPRE bit */ 
  tmpreg &= CR_CLEAR_MASK;
  
  /* Configure ADCx: ADC prescaler according to ADC_Prescaler */                
  tmpreg |= (uint32_t)(ADC_CommonInitStruct->ADC_Prescaler);        
                
  /* Write to ADC CCR */
  ADC->CCR = tmpreg;
}

/**
  * @brief  Fills each ADC_CommonInitStruct member with its default value.
  * @param  ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structure
  *         which will be initialized.
  * @retval None
  */
void ADC_CommonStructInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct)                      
{
  /* Reset ADC init structure parameters values */
  /* Initialize the ADC_Prescaler member */
  ADC_CommonInitStruct->ADC_Prescaler = ADC_Prescaler_Div1;

}

/**
  * @brief  Enables or disables the specified ADC peripheral.
  * @param  ADCx: where x can be 1 to select the ADC1 peripheral.
  * @param  NewState: new state of the ADCx peripheral. 
  *         This parameter can be: ENABLE or DISABLE.
  * @retval None
  */
void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState)
{
  /* Check the parameters */
  assert_param(IS_ADC_ALL_PERIPH(ADCx));
  assert_param(IS_FUNCTIONAL_STATE(NewState));

  if (NewState != DISABLE)
  {
    /* Set the ADON bit to wake up the ADC from power down mode */
    ADCx->CR2 |= (uint32_t)ADC_CR2_ADON;
  }
  else
  {
    /* Disable the selected ADC peripheral */
    ADCx->CR2 &= (uint32_t)(~ADC_CR2_ADON);
  }
}

/**
  * @}
  */

/** @defgroup ADC_Group2 Power saving functions
 *  @brief   Power saving functions 
 *
@verbatim   
 ===============================================================================
                              Power saving functions
 ===============================================================================  

  This section provides functions allowing to reduce power consumption.
  The two function must be combined to get the maximal benefits:
  When the ADC frequency is higher than the CPU one, it is recommended to  
  1. Insert a freeze delay : 
     ==> using ADC_DelaySelectionConfig(ADC1, ADC_DelayLength_Freeze);
  2. Enable the power down in Idle and Delay phases :
     ==> using ADC_PowerDownCmd(ADC1, ADC_PowerDown_Idle_Delay, ENABLE);

@endverbatim
  * @{
  */

/**
  * @brief  Enables or disables the ADC Power Down during Delay and/or Idle phase.
  * @note   ADC power-on and power-off can be managed by hardware to cut the 
  *         consumption when the ADC is not converting. 
  * @param  ADCx: where x can be 1 to select the ADC1 peripheral.
  * @param  ADC_PowerDown: The ADC power down configuration. 
  *         This parameter can be one of the following values:
  *     @arg ADC_PowerDown_Delay:      ADC is powered down during delay phase  
  *     @arg ADC_PowerDown_Idle:       ADC is powered down during Idle phase 
  *     @arg ADC_PowerDown_Idle_Delay: ADC is powered down during Delay and Idle phases