# Generated by Code Composer Studio# Makefile for C:\ti\myprojects\tms320vc547xbootloader_sds_022702\dsp_proj\dsp_proj.pjt# This makefile is intended to be compatible with any version of make.## USAGE# Step 1: Set up proper environment variables, by running DosRun.bat#         (Windows platform) or set them up by yourself.# Step 2: Change directory to the directory of this makefile, which is stored#         in the macro MAKEFILE_DIR# Step 3: In the makefile directory, you can perform one of these operations:#         To build the configuration <config>, type make <config>#         To clean the configuration <config>, type make <config>clean#         To rebuild the configuration <config>, type make <config>rebuild#         If <config> is not specified, the operations apply to the active#         configuration, which is stored in the macro ACTIVE_CONFIG.## DETAILS# Step 1:#   In order for this makefile to work, you must have the environment variables# set properly.  Specifically, the paths to build programs and the system-wide# header files and library files must be set.#   In Windows, a batch file "DosRun.bat", located at the root directory of# the Code Composer Studio installation, is provided to set up these variables.#   In UNIX, you can set up these environment variables yourself.  The "PATH"# variable must include the paths to the build programs, and the "C_DIR" and# "A_DIR" variables must include the paths to the system-wide header files and# library files.## Step 2:#   System files referenced by this project are specified in full path names,# while other files in this project are specified in path names relative to the# directory of this makefile.  These directory names are stored in DIR_x macros.# You can modify them to reflect the locations of the files on this system.#   It is important that the command to make this makefile is issued from the# directory of this makefile, which is stored in the macro MAKEFILE_DIR.## Step 3:#   There are three operations that can be performed on a build configuration:# make, clean, and rebuild. A rebuild forces all files in the configuration to# be rebuilt.# To build the configuration <config>, type make <config># To clean the configuration <config>, type make <config>clean# To rebuild the configuration <config>, type make <config>rebuild#   If <config> is not specified, the operations apply to the active# configuration. The active configuration can be any valid build configuration# (including "all") and is specified in the macro ACTIVE_CONFIG.# To build the active configuration, type make# To clean the active configuration, type make clean# To rebuild the active configuration, type make rebuild# The MKFLAGS macro takes the place of the MFLAGS or MAKEFLAGS macro. If it# gives you any trouble, just delete the macro. It is used when recursively# calling make (i.e. when rebuilding)MKFLAGS= $(MFLAGS)$(MAKEFLAGS)MAKEFILE_DIR= C:/ti/myprojects/tms320vc547xbootloader_sds_022702/dsp_proj# The active configuration can be one of these valid build configurations:# all, DebugACTIVE_CONFIG= Debug# These DIR_x macros store the directories of the files used in this project.# There must be no trailing spaces after these macros.DIR_1= DebugDIR_2= C:/TI/C5400/CGTOOLS/BINDIR_3= C:/ti/c5400/cgtools/libSOURCE=$(DIR_3)/rts.libSOURCE=intvect.s54SOURCE=main.cSOURCE=dsp_proj.cmdactive_config: $(ACTIVE_CONFIG)clean: $(ACTIVE_CONFIG)cleanrebuild: $(ACTIVE_CONFIG)rebuildforce_rebuild: all: Debug allclean: Debugclean allrebuild: Debugrebuild Debugclean: 	-@rm -f $(DIR_1)/intvect.obj	-@rm -f $(DIR_1)/main.obj	-@rm -f dsp_proj.outDebugrebuild: 	$(MAKE) $(MFLAGS) -f dsp_proj.mak Debug FRC=force_rebuildDebug: dsp_proj.outdsp_proj.Debug.fbs: 	../out2boot/out2boot dsp_proj ; \	copy dsp_proj_code.h ../arm_boot ; \	copy dsp_proj_data.h ../arm_boot$(DIR_1)/intvect.obj: $(FRC) intvect.s54 	"$(DIR_2)/cl500" -g -q -fr"C:/ti/myprojects/tms320vc547xbootloader_sds_022702/dsp_proj/Debug" -d"_DEBUG" "intvect.s54" $(DIR_1)/main.obj: $(FRC) main.c 	"$(DIR_2)/cl500" -g -q -fr"C:/ti/myprojects/tms320vc547xbootloader_sds_022702/dsp_proj/Debug" -d"_DEBUG" "main.c" dsp_proj.out: $(FRC) $(DIR_3)/rts.lib $(DIR_1)/intvect.obj $(DIR_1)/main.obj dsp_proj.cmd 	-@echo -z -q -c -o"./dsp_proj.out" -x> dsp_proj.Debug.lkf	-@echo "$(DIR_3)/rts.lib">> dsp_proj.Debug.lkf	-@echo "$(DIR_1)/intvect.obj">> dsp_proj.Debug.lkf	-@echo "$(DIR_1)/main.obj">> dsp_proj.Debug.lkf	-@echo "dsp_proj.cmd">> dsp_proj.Debug.lkf	"$(DIR_2)/cl500" -@"dsp_proj.Debug.lkf"	-@rm -f dsp_proj.Debug.lkf	$(MAKE) $(MFLAGS) -f dsp_proj.mak dsp_proj.Debug.fbs