[Library]others = /home1d/tools/MTI/EE_52c/modeltech/modelsim.iniwork = ./workpack = ./workvital = ./work[vcom]; Turn on VHDL-1993 as the default. Normally is off.; VHDL93 = 1; Show source line containing error. Default is off.; Show_source = 1; Turn off unbound-component warnings. Default is on.; Show_Warning1 = 0; Turn off process-without-a-wait-statement warnings. Default is on.; Show_Warning2 = 0; Turn off null-range warnings. Default is on.; Show_Warning3 = 0; Turn off no-space-in-time-literal warnings. Default is on.; Show_Warning4 = 0; Turn off multiple-drivers-on-unresolved-signal warnings. Default is on.; Show_Warning5 = 0; Turn off optimization for IEEE std_logic_1164 package. Default is on.; Optimize_1164 = 0; Turn on resolving of ambiguous function overloading in favor of the; "explicit" function declaration (not the one automatically created by; the compiler for each type declaration). Default is off.; Explicit = 1; Turn off VITAL compliance checking. Default is checking on.; NoVitalCheck = 1; Ignore VITAL compliance checking errors. Default is to not ignore.; IgnoreVitalErrors = 1; Turn off acceleration of the VITAL packages. Default is to accelerate.; NoVital = 1; Turn off inclusion of debugging info within design units. Default is to include.; NoDebug = 1; Turn on Verilog hazard checking (order-dependent accessing of global vars).; Default is off.; Hazard = 1; Turn off "loading..." messages. Default is messages on.; Quiet = 1; Turn on converting regular Verilog identifiers to uppercase. Allows case; insensitivity for module names. Default is no conversion.; UpCase = 1; Turn on some limited synthesis rule compliance checking. Checks only:;	-- signals used (read) by a process must be in the sensitivity list; CheckSynthesis = 1; Activate optimizations on expressions that don't involve signals, waits,; or function/procedure/task invocations.; ScalarOpts = 1[vlog]; Activate optimizations on expressions that don't involve signals, waits,; or function/procedure/task invocations.; ScalarOpts = 1[vsim]; Simulator resolution; Set to fs, ps, ns, us, ms, or sec with optional prefix of 1, 10, or 100.Resolution = ps; User time unit for run commands; Set to default, fs, ps, ns, us, ms, or sec. The default is to use the; unit specified for Resolution. For example, if Resolution is 100ps,; then UserTimeUnit defaults to ps.UserTimeUnit = default; Default run lengthRunLength = 10000000000; Maximum iterations that can be run without advancing simulation timeIterationLimit = 5000; Stop the simulator after an assertion message; 0 = Note  1 = Warning  2 = Error  3 = Failure  4 = FatalBreakOnAssertion = 3; Assertion Message Format; %S - Severity Level ; %R - Report Message; %T - Time of assertion; %D - Delta; %I - Instance or Region pathname (if available); %% - print '%' character; AssertionFormat = "** %S: %R\n   Time: %T  Iteration: %D%I\n"; Default radix for all windows and commands...; Set to symbolic, ascii, binary, octal, decimal, hex, unsignedDefaultRadix = symbolic; VSIM Startup command; Startup = do startup.do; File for saving command transcriptTranscriptFile = transcript; Specify whether paths in simulator commands should be described ; in VHDL or Verilog format. For VHDL, PathSeparator = /; for Verilog, PathSeparator = .PathSeparator = /; Disable assertion messages; IgnoreNote = 1; IgnoreWarning = 1; IgnoreError = 1; IgnoreFailure = 1; Default force kind. May be freeze, drive, or deposit ; or in other terms, fixed, wired or charged.; DefaultForceKind = freeze; If zero, open files when elaborated; else open files on first read or write; DelayFileOpen = 0; Control VHDL files opened for write;   0 = Buffered, 1 = UnbufferedUnbufferedOutput = 0; This controls the number of characters of a signal name; shown in the waveform window and the postscript plot. ; The default value or a value of zero tells VSIM to display ; the full name.; WaveSignalNameWidth = 10; This allows the postscript plot name region size to be scaled; to compensate for font differences.; WaveSignalNameScale = 1.0; Turn off warnings from the std_logic_arith, std_logic_unsigned; and std_logic_signed packages.; StdArithNoWarnings = 1; Turn off warnings from the IEEE numeric_std and numeric_bit; packages.; NumericStdNoWarnings = 1; Control the format of a generate statement label. Don't quote it.; GenerateFormat = %s__%d; Specify whether checkpoint files should be compressed.; The default is to be compressed.; CheckpointCompressMode = 0; List of dynamically loaded objects for Verilog PLI applications; Veriuser = veriuser.sl[lmc]; V-System's interface to Logic Modeling's SmartModel SWIFT softwarelibsm = $MODEL_TECH/libsm.sl; V-System's interface to Logic Modeling's SmartModel SWIFT software (Windows NT); libsm = $MODEL_TECH/libsm.dll;  Logic Modeling's SmartModel SWIFT software (HP 9000 Series 700); libswift = $LMC_HOME/lib/hp700.lib/libswift.sl;  Logic Modeling's SmartModel SWIFT software (IBM RISC System/6000); libswift = $LMC_HOME/lib/ibmrs.lib/swift.o;  Logic Modeling's SmartModel SWIFT software (Sun4 Solaris); libswift = $LMC_HOME/lib/sun4Solaris.lib/libswift.so;  Logic Modeling's SmartModel SWIFT software (Sun4 SunOS);	do setenv LD_LIBRARY_PATH $LMC_HOME/lib/sun4SunOS.lib;	and run "vsim.swift".;  Logic Modeling's SmartModel SWIFT software (Windows NT); libswift = $LMC_HOME/lib/win32.lib/libswift.dll; V-System's interface to Logic Modeling's hardware modeler SFI softwarelibhm = $MODEL_TECH/libhm.sl;  Logic Modeling's hardware modeler SFI software (HP 9000 Series 700); libsfi = <sfi_dir>/lib/hp700/libsfi.sl;  Logic Modeling's hardware modeler SFI software (IBM RISC System/6000); libsfi = <sfi_dir>/lib/rs6000/libsfi.a;  Logic Modeling's hardware modeler SFI software (Sun4 Solaris); libsfi = <sfi_dir>/lib/sun4.solaris/libsfi.so;  Logic Modeling's hardware modeler SFI software (Sun4 SunOS); libsfi = <sfi_dir>/lib/sun4.sunos/libsfi.so[modelsim]cwd = /ae7/janis/Debussy/VHDL/new_demo/RTL