/****************************************************************************** * * Name:	sklm80.c * Project:	GEnesis, PCI Gigabit Ethernet Adapter * Version:	$Revision: 1.20 $ * Date:	$Date: 2002/08/13 09:16:27 $ * Purpose:	Funktions to access Voltage and Temperature Sensor (LM80) * ******************************************************************************//****************************************************************************** * *	(C)Copyright 1998-2002 SysKonnect GmbH. * *	This program is free software; you can redistribute it and/or modify *	it under the terms of the GNU General Public License as published by *	the Free Software Foundation; either version 2 of the License, or *	(at your option) any later version. * *	The information in this file is provided "AS IS" without warranty. * ******************************************************************************//****************************************************************************** * * History: * *	$Log: sklm80.c,v $ *	Revision 1.20  2002/08/13 09:16:27  rschmidt *	Changed return value for SkLm80ReadSensor() back to 'int' *	Editorial changes * *	Revision 1.19  2002/08/06 09:43:31  jschmalz *	Extensions and changes for Yukon * *	Revision 1.18  2002/08/02 12:26:57  rschmidt *	Editorial changes * *	Revision 1.17  1999/11/22 13:35:51  cgoos *	Changed license header to GPL. * *	Revision 1.16  1999/05/27 14:05:47  malthoff *	Fans: Set SenVal to 0 if the fan value is 0 or 0xff. Both values *	are outside the limits (0: div zero error, 0xff: value not in *	range, assume 0). * *	Revision 1.15  1999/05/27 13:38:51  malthoff *	Pervent from Division by zero errors. * *	Revision 1.14  1999/05/20 09:20:01  cgoos *	Changes for 1000Base-T (Fan sensors). * *	Revision 1.13  1998/10/22 09:48:14  gklug *	fix: SysKonnectFileId typo * *	Revision 1.12  1998/10/09 06:12:06  malthoff *	Remove ID_sccs by SysKonnectFileId. * *	Revision 1.11  1998/09/04 08:33:48  malthoff *	bug fix: SenState = SK_SEN_IDLE when *	leaving SK_SEN_VALEXT state * *	Revision 1.10  1998/08/20 12:02:10  gklug *	fix: compiler warnings type mismatch * *	Revision 1.9  1998/08/20 11:37:38  gklug *	chg: change Ioc to IoC * *	Revision 1.8  1998/08/19 12:20:58  gklug *	fix: remove struct from C files (see CCC) * *	Revision 1.7  1998/08/17 07:04:57  malthoff *	Take SkLm80RcvReg() function from ski2c.c. *	Add IoC parameter to BREAK_OR_WAIT() macro. * *	Revision 1.6  1998/08/14 07:11:28  malthoff *	remove pAc with pAC. * *	Revision 1.5  1998/08/14 06:46:55  gklug *	fix: temperature can get negative * *	Revision 1.4  1998/08/13 08:27:04  gklug *	add: temperature reading now o.k. *	fix: pSen declaration, SK_ERR_LOG call, ADDR macro * *	Revision 1.3  1998/08/13 07:28:21  gklug *	fix: pSen was wrong initialized *	add: correct conversion for voltage readings * *	Revision 1.2  1998/08/11 07:52:14  gklug *	add: Lm80 read sensor function * *	Revision 1.1  1998/07/17 09:57:12  gklug *	initial version * * * ******************************************************************************/#include <config.h>#ifdef CONFIG_SK98/*	LM80 functions*/static const char SysKonnectFileId[] =	"$Id: sklm80.c,v 1.20 2002/08/13 09:16:27 rschmidt Exp $" ;#include "h/skdrv1st.h"		/* Driver Specific Definitions */#include "h/lm80.h"#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */#ifdef	SK_DIAG#define	BREAK_OR_WAIT(pAC,IoC,Event)	SkI2cWait(pAC,IoC,Event)#else	/* nSK_DIAG */#define	BREAK_OR_WAIT(pAC,IoC,Event)	break#endif	/* nSK_DIAG */#ifdef	SK_DIAG/* * read the register 'Reg' from the device 'Dev' * * return 	read error	-1 *		success		the read value */int	SkLm80RcvReg(SK_IOC	IoC,		/* Adapter Context */int		Dev,		/* I2C device address */int		Reg)		/* register to read */{	int	Val = 0;	int	TempExt;	/* Signal device number */	if (SkI2cSndDev(IoC, Dev, I2C_WRITE)) {		return(-1);	}	if (SkI2cSndByte(IoC, Reg)) {		return(-1);	}	/* repeat start */	if (SkI2cSndDev(IoC, Dev, I2C_READ)) {		return(-1);	}	switch (Reg) {	case LM80_TEMP_IN:		Val = (int)SkI2cRcvByte(IoC, 1);		/* First: correct the value: it might be negative */		if ((Val & 0x80) != 0) {			/* Value is negative */			Val = Val - 256;		}		Val = Val * SK_LM80_TEMP_LSB;		SkI2cStop(IoC);		TempExt = (int)SkLm80RcvReg(IoC, LM80_ADDR, LM80_TEMP_CTRL);		if (Val > 0) {			Val += ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);		}		else {			Val -= ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB);		}		return(Val);		break;	case LM80_VT0_IN:	case LM80_VT1_IN:	case LM80_VT2_IN:	case LM80_VT3_IN:		Val = (int)SkI2cRcvByte(IoC, 1) * SK_LM80_VT_LSB;		break;	default:		Val = (int)SkI2cRcvByte(IoC, 1);		break;	}	SkI2cStop(IoC);	return(Val);}#endif	/* SK_DIAG *//* * read a sensors value (LM80 specific) * * This function reads a sensors value from the I2C sensor chip LM80. * The sensor is defined by its index into the sensors database in the struct * pAC points to. * * Returns	1 if the read is completed *		0 if the read must be continued (I2C Bus still allocated) */int SkLm80ReadSensor(SK_AC		*pAC,	/* Adapter Context */SK_IOC		IoC,	/* I/O Context needed in level 1 and 2 */SK_SENSOR	*pSen)	/* Sensor to be read */{	SK_I32		Value;	switch (pSen->SenState) {	case SK_SEN_IDLE:		/* Send address to ADDR register */		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, pSen->SenReg, 0);		pSen->SenState = SK_SEN_VALUE ;		BREAK_OR_WAIT(pAC, IoC, I2C_READ);	case SK_SEN_VALUE:		/* Read value from data register */		SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));		Value &= 0xff; /* only least significant byte is valid */		/* Do NOT check the Value against the thresholds */		/* Checking is done in the calling instance */		if (pSen->SenType == SK_SEN_VOLT) {			/* Voltage sensor */			pSen->SenValue = Value * SK_LM80_VT_LSB;			pSen->SenState = SK_SEN_IDLE ;			return(1);		}		if (pSen->SenType == SK_SEN_FAN) {			if (Value != 0 && Value != 0xff) {				/* Fan speed counter */				pSen->SenValue = SK_LM80_FAN_FAKTOR/Value;			}			else {				/* Indicate Fan error */				pSen->SenValue = 0;			}			pSen->SenState = SK_SEN_IDLE ;			return(1);		}		/* First: correct the value: it might be negative */		if ((Value & 0x80) != 0) {			/* Value is negative */			Value = Value - 256;		}		/* We have a temperature sensor and need to get the signed extension.		 * For now we get the extension from the last reading, so in the normal		 * case we won't see flickering temperatures.		 */		pSen->SenValue = (Value * SK_LM80_TEMP_LSB) +			(pSen->SenValue % SK_LM80_TEMP_LSB);		/* Send address to ADDR register */		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, LM80_TEMP_CTRL, 0);		pSen->SenState = SK_SEN_VALEXT ;		BREAK_OR_WAIT(pAC, IoC, I2C_READ);	case SK_SEN_VALEXT:		/* Read value from data register */		SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));		Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */		/* cut the LSB bit */		pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) *			SK_LM80_TEMP_LSB);		if (pSen->SenValue < 0) {			/* Value negative: The bit value must be subtracted */			pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB);		}		else {			/* Value positive: The bit value must be added */			pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB);		}		pSen->SenState = SK_SEN_IDLE ;		return(1);	default:		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG);		return(1);	}	/* Not completed */	return(0);}#endif /* CONFIG_SK98 */