# Network adapter configuration## The address format is "scheme,socket,instance,hwaddr".## Note: the "network address" here is NOT the same as the IP address.# See the Networking HOWTO.  In short, the network address is the IP# address masked by the netmask.## added DHCP option 06/21/97 (Yoichi Hariguchi)#case "$ADDRESS" in*,*,*,*)    # Transceiver selection, for cards that need it -- see 'man ifport'    IF_PORT=""    # Use DHCP [y/n]    DHCP="y"    # startup file invoked when dhcpcd gets the configuration from server    DHCPSTF=/etc/rc.d/rc.dhcp    # Use BOOTP [y/n]    BOOTP="n"    # IP address    IPADDR=""    # Netmask    NETMASK="255.255.255.0"    # Network address    NETWORK="1.2.0.0"    # Broadcast address    BROADCAST="1.2.255.255"    # Gateway address    GATEWAY="1.2.0.1"    # Domain name    DOMAIN="stanford.edu"    # Nameserver #1    DNS_1=""    # Nameserver #2    DNS_2=""    # Nameserver #3    DNS_3=""    # NFS mounts, should be listed in /etc/fstab    MOUNTS=""    # For IPX interfaces, the frame type (i.e., 802.2)    IPX_FRAME=""    # For IPX interfaces, the network number    IPX_NETNUM=""    # Extra stuff to do after setting up the interface    start_fn () { return }    # Extra stuff to do before shutting down the interface    stop_fn () { return }    ;;esac