======================================================================Changes for U-Boot 1.1.4:======================================================================* Changes to Yellowstone & Yosemite 440EP/GR eval boards:  - Changed GPIO setup to enable another address line in order to    address 64M of FLASH.  - Added function sdram_tr1_set to auto calculate the tr1 value for    the DDR.  Patch by Steven Blakeslee, 12 Dec 2005* MPC5200:  Set PCI retry counter to 0 = infinite retry;  The default of 255 is too short for slow devices.  Patch by Martin Nykodym, 12 Dec 2005* Change port configuration for O2DNT (CODEC1 on PSC1).* Fix register for PCI async mode on PPC440EP  Patch by Youngchul Bang, 08 Dec 2005* Fix U-Boot linking problems (add .eh_frame segment to linker script)  This segment may be required by some libgcc.a functions  (like _udivdi3).* Fix DPRAM offset/size for MPC8541/8555.  Simplify TQM85xx Makefile handling.* Fix data overflow (typo?) in rtc/ds1302.c* Fix U-Boot compilation for MIPS boards using ELDK 4.0* Add support for TQM8541/8555 boards, TQM85xx support reworked:  - Support for TQM8541/8555 boards added.  - Complete rework of TQM8540/8560 support.  - Common TQM85xx code now supports all current TQM85xx platforms    (TQM8540/8541/8555/8560).  - DDR SDRAM size detection added.  - CAS latency default values can be overwritten by setting "serial#"    to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.    If problems are detected with this non default CAS latency,    the default values will be used instead.  - Flash size detection added.  - Moved FCC ethernet driver initialization behind TSEC driver init    -> TSEC is first device.  Patch by Stefan Roese, 30 Nov 2005* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.  Patch by John Otken, 23 Nov 2005* Changed PPC44x startup message (cpu info, speed...) to common style:  On PPC44x platforms, the startup message generated in "cpu.c" only  comprised the ppc type and revision but not additional information  like speed etc. Those speed infos where printed in the board specific  code. This new implementation now prints all CPU infos in the common  cpu specific code. No board specific code is needed anymore and  therefore removed from all current 44x implementations.  Patch by Stefan Roese, 27 Nov 2005* Adjust TQM834x PHY addresses for latest hardware revision.* Increase malloc arena on TQM5200 board to 256 kB.  With 64 kb uniform flash sector size the old value of 128 kB was  too small.* Fix miiphy global data initialization (problem on 4xx boards when  no ethaddr is assigned). Initialization moved from  miiphy_register() to eth_initialize().  Based on initial patch for 4xx platform by Matthias Fuchs.* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.  The COPYING file was extended to make clear that these files can be  used in non-GPL code, too.  Also, a corresponding note was placed in the headers of the affected files.* Add support for Prodrive P3P440 board:  - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c  - CFG_FLASH_QUIET_TEST added to use the common CFI driver    for bank autodetection  Patch by Stefan Roese, 22 Nov 2005* Change all '$(...)' variable references into '${...}'  which makes the environment compatible with the hush shell.  WARNING: Support for the old '$(...)' syntax will be  discontinued in a later version.* Minor changes to init flags in TQM834x PCI.* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)  Patch by Stefan Roese, 15 Nov 2005* New PPC 405EP board added: CMS700  Added CONFIG_NET_MULTI for VOM405 board.  Added reset_phy() for VOM405 board.  Patch by Matthias Fuchs, 09 Nov 2005* Updated PCI mapping for esd CPCI2DP board.  Add support for error LED.  Patch by Matthias Fuchs, 07 Nov 2005* Fix MPC85xx PCI support (pci_register_hose() before pci config access)  Patch by Stefan Roese, 07 Nov 2005* Correct PPC Timebase register definitions (SPRN_TBRL...)  Patch by Stefan Roese, 07 Nov 2005* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size  Patch by Stefan Roese, 05 Nov 2005* Additional fix for external IRQ config on Yellowstone & Yosemite  Patch by Stefan Roese, 03 Nov 2005* Add support for Ocotea pass 3 with 440GX Rev. F  Patch by Stefan Roese, 01 Nov 2005* Fix external IRQ configuration on Yellowstone & Yosemite  Patch by Stefan Roese, 28 Oct 2005* Add support for multiple PHYs.  Tested on the following boards:	cmcpu2	    (at91rm9200/ether.c)	PPChameleon (ppc4xx/4xx_enet.c)	yukon	    (mpc8220/fec.c)	uc100	    (mpc8xx/fec.c)	tqm834x	    (mpc834x/tsec.c) with EEPRO100	lite5200    (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)  Main changes include:  common/miiphyutil.c  - miiphy_register routine was added to allow multiple PHYs to be registered  - miiphy_read and miiphy_write are now defined in this file, and    require additional argument (char *devname)  - other miiphy_* routines also require additional device name argument  ../lib_i386/board.c  ../lib_ppc/board.c  Calling reset_phy() was moved to be executed *after* eth_initialize().  This is necessary as now some of the implementations of reset_phy()  may need to use miiphy_reset() which is not allowed before eth_initialize()  as eth_initialize registers all required miiphy_* routines.  Tested on IP860 and PHY initializes properly after this change.* Correct includes for flat tree builder.* Fix conflicting types (flash_write()) in trab auto_update.c.* Add PCI support for the TQM834x board.* Add missing 4xx board to MAKEALL  Patch by Stefan Roese, 20 Oct 2005* Fix conflicting types (flash_write()) in esd auto_update.c  Patch by Stefan Roese, 20 Oct 2005* Fix problem with sleep in NetConsole (use get_timer())  Patch by Stefan Roese, 20 Oct 2005* Add NetConsole Support for AMCC eval boards  Patch by Stefan Roese, 20 Oct 2005* Fix NetConsole support on 4xx (only print eth link on 1st transfer)  Patch by Stefan Roese, 18 Oct 2005* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.  Fix identation on ext2ls help entry.  Patch by Stefan Roese, 14 Oct 2005* Add support for TQM834x boards.  Cleanup.* Cleanup for GCC-4.x* Add documentation for Open Firmware Flat Tree and usage.  Patch by Pantelis Antoniou, 13 Oct 2005* Add missing files for Pantelis Antoniou's patch  Patch by Pantelis Antoniou, 04 Sep 2005* Fix problem in ppc4xx eth-driver without ethaddr (only without  CONFIG_NET_MULTI set)  Patch by Stefan Roese, 10 Oct 2005* Fix gzip bmp support (test if malloc fails, warning when truncated).  Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.  Patch by Stefan Roese, 07 Oct 2005* Add support for OF flat tree for the STXtc board.  Patch by Pantelis Antoniou, 04 Sep 2005* Support passing of OF flat trees to the kernel.  Patch by Pantelis Antoniou, 04 Sep 2005* Cleanup* Add support for NetSilicon NS7520 processor.  Patch by Art Shipkowski, 12 May 2005* Add support for AP1000 board.  Patch by James MacAulay, 07 Oct 2005* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200  Patch by Anders Larsen, 07 Oct 2005  The Atmel errata #11 states that the transfer buffer descriptor  table must be aligned on a 16-word boundary. As it turned out, this  is insufficient - it seems the table must be aligned on a boundary  at least as large as the table itself (in Linux this is not an  issue - the table is aligned on a PAGE_SIZE (4096) boundary).* Fixed compilation for ARM when using a (standard) hard-FP toolchain  Patch by Anders Larsen, 07 Oct 2005* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.  sed the linker scripts, rather than pre-process them.  Patch by Peter Pearse, 07 Oct 2005* Update make target for ARM supported boards.  Use lowlevel_init() instead of platformsetup() [rename].  Patch by Peter Pearse, 06 Oct 2005* Fix booting from serial dataflash on AT91RM9200  Patch by Peter Menzebach, 29 Aug 2005* Add JFFS2 support for TRAB board  Patch by Martin Krause, 25 Aug 2005* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI  Patch by Marcus Hall, 24 Aug 2005* Fix the machine-id of the Cogent csb637 board  Patch by Anders Larsen, 05 Oct 2005* Complete support for the KwikByte KB920x boards  Patch by Anders Larsen, 05 Oct 2005* Set the AT91RM9200 clock to asynchronous mode  Patch by Anders Larsen, 03 May 2005* Set the AT91RM9200 clock to synchronous mode  Patch by Anders Larsen, 29 Apr 2005* Add support for Cogent csb637  Patch by Anders Larsen, 29 Apr 2005* Fix dm9161.c initialization  Patch by Anders Larsen, 29 Apr 2005* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005  (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200  Patch by Anders Larsen, 29 Apr 2005* Fix device partition intialization for SystemACE disks.  Patch by Stephen Williams, 28 Apr 2005* Added support for KwikByte KB920x boards (based on AT91RM9200)  Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005* Add support for S29GL064M-R3 flash chip on xsengine board  Patch by Kurt Stremerch, 18 Apr 2005* E500 update: repoint IVPR to RAM when code is relocated  Patch by Kylo Ginsberg, 13 Apr 2005* Fix loop end test in lib_generic/string.c:strswab()  Patch by Andrew Dyer, October 10, 2005  Signed-off-by: Andrew Dyer <amdyer@gmail.com>* Cleanup* Update ARM Integrator boards:  Correct addessing errors in platform files.  Split off common core module data from Integrator header files to  include/armcoremodule.h.  Patch by Peter Pearse, 04 Oct 2005* Make sure only supported compiler options are used  Import "cc-option" shell function from kernel and  use it to get the correct ARM GCC options for individual CPUs  Patch by Peter Pearse, 30 Jun 2005* Fix 440GR to print correct cpu revision  Patch by Stefan Roese, 04 Oct 2005* Change board message on AMCC Yosemite & Yellowstone to common style  Patch by Stefan Roese, 03 Oct 2005* Fix compiler warning* Fix FEC PHY addresses for TQM85xx boards* Fix uninitialized variable problem in hush shell  Patch by Lars Rostock, 26 Sep 2005* Undo change of f6e20fc6ca... to include/configs/trab.h  (Must have been an accident?)* Add support for AT91RM9200 OHCI Controller.  Patch by Eric Benard, 07 Apr 2005* Update ARM mach-types.h  Patch by Eric Benard, 07 Apr 2005* Add support for MP2USB board.  Patch by Eric Benard, 07 Apr 2005* Add board support for armadillo HT1070  Patch by Rowel Atienza, 06 Apr 2005* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.  Patch by Vitaly Bordug, 30 Mar 2005* Add iopset command on mpc8xx  Patch by Daniel Eisenhut, 25 Mar 2005* Add support for MII in eepro100 driver.  Patch by Gleb Natapov, 21 Mar 2005* Fixes to the Lubbock (PXA 25x) support:  - Resolve the FIXME with respect to saving the u-boot environment.  - Make the default load address land in real memory.  - Fix lan91c96 SMC_{in,out}{b,w,l}() macros  Patch by David Brownell, 10 Mar 2005* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board  Patch by Marc Leeman, 04 Mar 2005* OMAP242x H4 board update  - fix for ES2 differences.  - switch to using the cfi_flash driver.  - fix SRAM build address.  - fix for GP device operation.  - unlock SRAM for GP devices.  - display more device information.  - fix potential deadlock in omap24xx_i2c driver.  - fix DLL load values to match dpllout*1 operation.  - fix 2nd chip select init for combo DDR device.  - add support for CFI Intel 28F256L18 on H4 board.  Patch by Richard Woodruff, 03 Mar 2005* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h  Patch by Steven Scholz, 02 Mar 2005* Fix typo in eth.c  Patch by Ara Avanesyan, 24 Feb 2005* Remove unneeded #include <malloc.h>  Patch by Ladislav Michl, 22 Feb 2005* Add cramfs support for m68k  Patch by Zachary Landau, 21 Feb 2005* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs  Patch by Jeff Angielski, 21 Feb 2005* Fix au1x00_serial baud rate calculation:  remove hardcoded cpu clock divisor and use register instead;  round up instead of truncate  Patch by Andrew Dyer, 15 Feb 2005* Add Xilinx Spartan3 family FPGA support  Patch by Kurt Stremerch, 14 Feb 2005* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET  Patch by Zachary Landau, 11 Feb 2005* Fix VOH405 Support  Patch by Matthias Fuchs, 25 Sep 2005* Added support for PCI bridge on MPC8272ADS  Patch by Vitaly Bordug, Feb 09 2005* Update multicore CM9XX support for Integrator AP to allow booting from flash  Patch by Jean-Paul Saman, 8 Feb 2005* Fix strswab() to reliably find end of string  Patch by Andrew Dyer, 08 Feb 2005* Fix typos in include/ppc440.h  Patch by Andrew E Mileski, 04 Feb 2005* Add Vibren (was Accelent) PXA255 IDP Support  Patch by Cliff Brake, 04 Feb 2005* Fix tools/bmp_logo.c using incorrect offset to pixel data  Patch by Andrew Dyer, 31 Jan 2005