* Add ARM946E cpu and core module targets; remap memory to 0x00000000  Patch by Peter Pearse, 2 Feb 2005* Fix error handling in tools/env/fw_env.c  Patch by Ara Avanesyan, 01 Feb 2005* Fix MGT5100 PSC baudrate calculation  Patch by Sebastian Schau, 27 Jan 2005* OMAP242x fix for GP device booting  - Add SRAM unlock for GP devices.  - Change DDR DLL unlock value to allow DPLLout*1 operation.  Patches by Richard Woodruff, 21 Jan 2005:* Add support for AMD's Pb1x00 eval board;  add MII routines to the au1x00 ethernet driver;  add USB ohci driver (work in progress)  Patch by Thomas Sailer, 20 Jan 2005* Update omap5912osk board  Use drivers/cfi_flash.c instead of private flash driver;  Remove hardcoded personalized settings from omap5912osk.h;  Fix spacing with (RO) marks in 'flinfo' output.  Patch by Michael Bendzick, 14 Jan 2005* Fix warnings for PCI code on ixp  Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005* virtex2 fix for bogus download error messages  The virtex2 FPGA download code watches for init going active during  a download of config data as an error condition. init also goes  active after a configuration is finished in concert with the done  signal. So far, the code does not check for done active until all  of the configuration data is sent. If configuration data has a few  extra pad bytes at the end, this would cause an error message even  though the download had suceeded.  NOTE: virtex2 slave serial and spartan2 versions may still have the  same problem.  Patch by Andrew Dyer, 12 Jan 2005* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian  Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"  message when probing for nonexistent flash in little endian mode.  As a side effect more efficient and smaller code is generated,  which is always a Good Thing (TM).  Patch by Ladislav Michl, 24 Sep 2005* Update for TFTP using a fixed UDP port  Use the approved environment variable names. Added "tftpdstp" to  allow ports other than 69 per Tolunay Orkun's recommendation.  Patch by Jerry Van Baren, 12 Jan 2005* Allow to force TFTP to use a fixed UDP port  (Add a configuration option CONFIG_TFTP_PORT and optional env  variable tftpport)  Patch by Jerry Van Baren, 10 Jan 2005* Fix ethernet timeouts on dbau1550 and other au1x00 systems  Patch by Leif Lindholm, 29 Dec 2004* Cleanup: fix broken builds* Fix PHY address argument passing with mii info command  Patch by Andrew Dyer, 28 Dec 2004* Cleanup (PPC4xx is AMCC now)* esd CPCI2DP board added  Patch by Matthias Fuchs, 22 Sep 2005* esd PMC405 board updated  Patch by Matthias Fuchs, 22 Sep 2005* Add SM501 support to HH405 board.  Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).  Add support for eeprom write-enable (CFG_EEPROM_WREN).  Patch by Stefan Roese, 22 Sep 2005* Fix autonegotiation in tsec ethernet driver  Patch by Stefan Roese, 21 Sep 2005* Fix bug in auto_update (trab board)  Patch by Martin Krause, 16 Sep 2005* Fix computation of framebuffer palette for 8bpp LCD bitmaps  Patch by Francesco Mandracci, 16 Sep 2005* Update configuration for INKA4x0 board* Update configuration for PM854 board  Based on patch by R. Loeffl, 20 Jul 2005* Add PCI support to TQM8540 and TQM8560 boards  Patch by Stefan Roese, 15 Sep 2005* Update AMCC Yosemite to get a consistent setup for all AMCC eval  boards (baudrate, environment...). Flash driver fixed.  Patch by Stefan Roese, 15 Sep 2005* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd  ethernet port on ebony.  Patch by Stefan Roese, 7 Sep 2005* Added support for mtddevnum and mtddevname variables (mtdparts command)* Change default console baud rate for stxxtc board* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).  Patch by Stefan Roese, 31 Aug 2005* Fix default command set (don't include CFG_CMD_DISPLAY command)  Patch by Pantelis Antoniou, 02 Sep 2005* Cleanup* Enable SM712 driver support for HMI1001 board.* Fix problems with ld version 2.16 (dot outside sections problem)  Pointed out by Gerhard Jaeger, 31 Aug 2005;  cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html* Prepare U-Boot for gcc-4.x: fix global data pointer initialization* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux* Add keyboard and dot matrix display support for HMI1001 board.* Prepare U-Boot for gcc-4.x* Fixed Bamboo port to enable running without DDR-DIMM  (Bamboo has also 64MB onboard DDR)  Patch by Stefan Roese, 24 Aug 2005* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c  now handling all 4xx cpu's  Patch by Stefan Roese, 16 Aug 2005* Fix make dependencies for at91rm9200 and ks8695 cpus  Patch by Steven Scholz, 23 Aug 2005* Add JFFS2 support for TQM5200 board* Add esd cpci5200 and pf5200 boards  Patch by Reinhard Arlt, 22 Aug 2005* Fix sysclock for TQM8540 and TQM8560 boards  Patch by Martin Krause, 25 Jul 2005* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2  Patch by Martin Krause, 08 Jun 2005* Add new board specific commands for TQM5200/STK52XX  - Sound commands (beep, wav, sound)  - Test commands (led, can, backlight, rs232)  Patch by Martin Krause, 02 May 2005* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz  because of a bug in the AT91RM9200 CPU PLL  Patch by Martin Krause, 22 Apr 2005* Add automatic HW detection for another CMC_PU2 variant  Patch by Martin Krause, 20 Apr 2005* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration  Patch by Martin Krause, 19 Apr 2005* Fix initialization problem on TQM5200 without SM501  Patch by Martin Krause, 08 Apr 2005* Add RTC support for STK52XX.200  Patch by Martin Krause, 07 Apr 2005* Add support for IFM o2dnt board* Enable PCI on hmi1001 board* Fix return values of the jffs2 commands ls/fsload/fsinfo,  so we can use them to, e.g., check the existence of a file with  "if ls foo; then this; else that; fi" in the hush shell  Patch by Andreas Engel, 16 August 2005* Coding style cleanup* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.  Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005* Check return value of malloc in 440gx_enet.c  Patch by Travis B. Sawyer, 18 Jul 2005* Add Sandburst Metrobox and Sandburst Karef board support packages.  Second serial port on 440GX now defined as a system device.  Add 'Short Etch' code for Cicada PHY within 440gx_enet.c  Patch by Travis B. Sawyer, 12 Jul 2005======================================================================Changes for U-Boot 1.1.3:======================================================================* Minor code cleanup* Add forgotten new fils from latest VoiceBlue update* Make bootretry feature work with hush shell.  Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.  Patch by Andreas Engel, 19 Jul 2005* Update Hymod Board Database PHP code in "tools" directory  Patch by Murray Jensen, 01 Jul 2005* Make "tr" command use POSIX compliant; export HOSTOS make variable  Patch by Murray Jensen, 30 Jun 2005* Fix Murray Jensen's mail address.  Patch by Murray Jensen, 30 Jun 2005* Preserve PHY_BMCR during a soft reset.  Patch by Carl Riechers, 24 Jun 2005* VoiceBlue update: eeprom tool can also store firmware version now.  eeprom.bin is runable by jumping at load address.  Patch by Ladislav Michl, 23 May 2005* Move the AT91RM9200DK to the ARM Systems list.  Patch by Anders Larsen, 26 Apr 2005* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3  Patch by Anders Larsen, 26 Apr 2005* measure_gclk() is needed when DEBUG is enabled  Patch by Bryan O'Donoghue, 25 Apr 2005* Add UPD-Checksum code, fix problem in net.c (return instead of break)  Patch by Reinhard Arlt, 12 Aug 2005* esd PCI405 board updated  Patch by Matthias Fuchs, 28 Jul 2005* esd WUH405 and DU405 board updated  Patch by Matthias Fuchs, 27 Jul 2005* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)  Patch by Matthias Fuchs, 4 May 2005* Update AMCC Yosemite to get a consistent setup for all AMCC eval  boards (baudrate, environment...). Flash driver fixed.  Patch by Stefan Roese, 11 Aug 2005* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port  Patch by Stefan Roese, 11 Aug 2005* Add NAND FLASH support for AMCC Bamboo 440EP eval board  Patch by Stefan Roese, 11 Aug 2005* Add configuration for IFM AEV FIFO board.  Minor coding style cleanup.* Add configuration for IFM SPI eval board* Fix CompactFlash problem on HMI1001 board* Make new "mtdparts" code build with older compilers  Patch by Andrea Scian, 09 Aug 2005* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to  CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design  with the 405 defines and the linux kernel defines.  Patch by Stefan Roese, 08 Aug 2005* Fix compiler warnings with older GCC versions* Add common (with Linux) MTD partition scheme and "mtdparts" command  Old, obsolete and duplicated code was cleaned up and replace by the  new partitioning method. There are two possible approaches now:  The first one is to define a single, static partition:  #undef CONFIG_JFFS2_CMDLINE  #define CONFIG_JFFS2_DEV		 "nor0"  #define CONFIG_JFFS2_PART_SIZE	 0xFFFFFFFF	/* use whole device */  #define CONFIG_JFFS2_PART_SIZE	 0x00100000	/* use 1MB */  #define CONFIG_JFFS2_PART_OFFSET	 0x00000000  The second method uses the mtdparts command line option and dynamic  partitioning:  /* mtdparts command line support */  #define CONFIG_JFFS2_CMDLINE  #define MTDIDS_DEFAULT	 "nor1=zuma-1,nor2=zuma-2"  #define MTDPARTS_DEFAULT	 "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"  Command line of course produces bigger images, and may be inappropriate  for some targets, so by default it's off.* Fix build problems for PM856 Board* Fix sign extension bug in 'fpga loadb' command;  make 'fpga loadb' always print the file header info  Patch by Andrew Dyer, 11 Jan 2005* Fix errors that occur when accessing SystemACE CF  Patch by Jeff Angielski, 09 Jan 2005* Document switching between U-Boot and PlanetCore on RPXlite  by Sam Song, 24 Dec 2004* Fix PowerQUICC II mask detection.  Patch by Eugene Surovegin, 20 Dec 2004* Add support for Altera NIOS DK1C20 board  Patch by Shlomo Kut, 13 Dec 2004* Add support for ep8248 board  Patch by Yuli Barcohen, 12 Dec 2004  Minor code cleanup.* Fix baudrate setting for KGDB on MPC8260  Patch by HoJin, 11 Dec 2004* Fix 'mii help' text formatting  Patch by Cory Tusar, 10 Dec 2004* Fix return code of NFS command  Patch by Hiroshi Ito, 11 Dec 2004* Fix typo* Fix compiler warnings in cpu/ppc4xx/usbdev.c  Patch by Steven Blakeslee, 04 Aug 2005* Add support for AMCC Bamboo PPC440EP eval board  Patch by Stefan Roese, 04 Aug 2005* Patch by Jon Loeliger  Fix style issues primarily in 85xx and 83xx boards.    - C++ comments    - Trailing white space    - Indentation not by TAB    - Excessive amount of empty lines    - Trailing empty lines* Patch by Ron Alder, 11 Jul 2005    Add Xianghua Xiao and Lunsheng Wang's support for the    GDA MPC8540 EVAL board.* Patch by Eran Liberty  Add support for the Freescale MPC8349ADS board.* Patch by Jon Loeliger, 25 Jul 2005  Move the TSEC driver out of cpu/mpc85xx as it will be shared  by the upcoming mpc83xx family as well.* Patch by Jon Loeliger, 05 May 2005  Implemented support for MPC8548CDS board.  Added DDR II support based on SPD values for MPC85xx boards.  This roll-up patch also includes bugfies for the previously  published patches:    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O* Patch by Jon Loeliger, 10 Feb 2005  Add config option CONFIG_HAS_FEC calling out 8540 FEC features.* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005  For MPC85xxCDS:    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow    for faster flash parts.    Add documentation for BR/OR for FLASH.* Patch by Jon Loeliger 08 Feb 2005  Determine L2 Cache size dynamically on 85XX boards.* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005  - Convert the CPM2 based functionality to use new CONFIG_CPM2    option rather than a myriad of CONFIG_MPC8560-like variants.    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the    new CONFIG_CPM2 option to each 8260 board.* Add support for MicroSys PM856 board  Patch by Josef Wagner, 03 Aug 2005* Minor fixes to PM854 board  Patch by Josef Wagner, 03