;**********************************************************************
;                                                                     *
;    Filename: PicOnOff.asm                                           *
;    Date: Dec 8th, 2005                                              *
;    File Version: Beta2 (for CBS only)                               *
;                                                                     *
;    Author: GAiWEi                                                   *
;    Company: Beijing Grandi                                          *
;                                                                     * 
;                                                                     *
;**********************************************************************
;                                                                     *
;    Files required:                                                  *
;        p10F202.inc                                                  *
;                                                                     *
;                                                                     *
;**********************************************************************
;                                                                     *
;    Notes:                                                           *
;                                                                     *
;                                                                     *
;                                                                     *
;                                                                     *
;**********************************************************************

	list      p=10F202            ; list directive to define processor
	#include <p10F202.inc>        ; processor specific variable definitions

	__CONFIG   _MCLRE_OFF & _CP_OFF & _WDT_OFF & _IntRC_OSC

	ERRORLEVEL -306 ; Get rid of banking messages...

; '__CONFIG' directive is used to embed configuration word within .asm file.
; The lables following the directive are located in the respective .inc file. 
; See respective data sheet for additional information on configuration word.

#define	LED0	GPIO, 0 ; LED 0 at PIN 0
#define	LED1	GPIO, 1 ; LED 1 at PIN 1
#define	LED2	GPIO, 2 ; LED 2 at PIN 2
#define	KEY0	GPIO, 0	; KEY 0 at PIN 0
#define	KEY1	GPIO, 1	; KEY 1 at PIN 1
#define	KEY2	GPIO, 2	; KEY 2 at PIN 2
#define	KEY3	GPIO, 3	; KEY 3 at PIN 3

;***** VARIABLE DEFINITIONS
state	EQU     0x10 ; bit7 - KEY3 state(0-pressed)  bit0 - power state(0-off) 
count1	EQU		0x11
count2	EQU		0x12
count3	EQU		0x13

;**********************************************************************
	ORG     0xFF             ; processor reset vector

; Internal RC calibration value is placed at location 0xFF by Microchip
; as a movlw k, where the k is a literal value.

	ORG     0x000             ; coding begins here
	MOVWF   OSCCAL            ; update register with factory cal value
	
	MOVLW	B'00011111'
	OPTION
	MOVLW	B'00001001'
	TRIS	GPIO
	MOVLW	B'10000000'
	MOVWF	state

	BCF		state, 0
	BCF		LED1

key3_proc
	MOVLW	0x04
	MOVWF	count3
loop3
	MOVLW	0xFF
	MOVWF	count2
loop2
	MOVLW	0xFF
	MOVWF	count1
loop1
	BTFSC	KEY3
	GOTO 	key3_up
	BCF		state, 7
	DECFSZ	count1, 1
	GOTO	loop1
	DECFSZ	count2, 1
	GOTO	loop2
	DECFSZ	count3, 1
	GOTO	loop3
	GOTO	key3_test
key3_up
	BSF		state, 7
key3_test
	INCF	count3, 1
	DECFSZ	count3, 1
	GOTO	key3_proc

	BTFSS	state, 0
	GOTO	power_on

power_off
	BCF		LED1
	BCF		state, 0
	GOTO	wait_key3up

power_on
	BSF		LED1
	BSF		state, 0

wait_key3up
	BTFSS	KEY3
	GOTO	$-1
	GOTO	key3_proc
	
	END                       ; directive 'end of program'