esac    case $ac_pass in    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;    2)      ac_configure_args1="$ac_configure_args1 '$ac_arg'"      if test $ac_must_keep_next = true; then	ac_must_keep_next=false # Got value, back to normal.      else	case $ac_arg in	  *=* | --config-cache | -C | -disable-* | --disable-* \	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \	  | -with-* | --with-* | -without-* | --without-* | --x)	    case "$ac_configure_args0 " in	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;	    esac	    ;;	  -* ) ac_must_keep_next=true ;;	esac      fi      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"      # Get rid of the leading space.      ac_sep=" "      ;;    esac  donedone$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }# When interrupted or exit'd, cleanup temporary files, and complete# config.log.  We remove comments because anyway the quotes in there# would cause problems or look ugly.# WARNING: Be sure not to use single quotes in there, as some shells,# such as our DU 5.0 friend, will then `close' the trap.trap 'exit_status=$?  # Save into config.log some information that might help in debugging.  {    echo    cat <<\_ASBOX## ---------------- #### Cache variables. #### ---------------- ##_ASBOX    echo    # The following way of writing the cache mishandles newlines in values,{  (set) 2>&1 |    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in    *ac_space=\ *)      sed -n \	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"      ;;    *)      sed -n \	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"      ;;    esac;}    echo    cat <<\_ASBOX## ----------------- #### Output variables. #### ----------------- ##_ASBOX    echo    for ac_var in $ac_subst_vars    do      eval ac_val=$`echo $ac_var`      echo "$ac_var='"'"'$ac_val'"'"'"    done | sort    echo    if test -n "$ac_subst_files"; then      cat <<\_ASBOX## ------------- #### Output files. #### ------------- ##_ASBOX      echo      for ac_var in $ac_subst_files      do	eval ac_val=$`echo $ac_var`	echo "$ac_var='"'"'$ac_val'"'"'"      done | sort      echo    fi    if test -s confdefs.h; then      cat <<\_ASBOX## ----------- #### confdefs.h. #### ----------- ##_ASBOX      echo      sed "/^$/d" confdefs.h | sort      echo    fi    test "$ac_signal" != 0 &&      echo "$as_me: caught signal $ac_signal"    echo "$as_me: exit $exit_status"  } >&5  rm -f core *.core &&  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&    exit $exit_status     ' 0for ac_signal in 1 2 13 15; do  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signaldoneac_signal=0# confdefs.h avoids OS command line length limits that DEFS can exceed.rm -rf conftest* confdefs.h# AIX cpp loses on an empty file, so make sure it contains at least a newline.echo >confdefs.h# Predefined preprocessor variables.cat >>confdefs.h <<_ACEOF#define PACKAGE_NAME "$PACKAGE_NAME"_ACEOFcat >>confdefs.h <<_ACEOF#define PACKAGE_TARNAME "$PACKAGE_TARNAME"_ACEOFcat >>confdefs.h <<_ACEOF#define PACKAGE_VERSION "$PACKAGE_VERSION"_ACEOFcat >>confdefs.h <<_ACEOF#define PACKAGE_STRING "$PACKAGE_STRING"_ACEOFcat >>confdefs.h <<_ACEOF#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"_ACEOF# Let the site file select an alternate cache file if it wants to.# Prefer explicitly selected file to automatically selected ones.if test -z "$CONFIG_SITE"; then  if test "x$prefix" != xNONE; then    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"  else    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"  fififor ac_site_file in $CONFIG_SITE; do  if test -r "$ac_site_file"; then    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5echo "$as_me: loading site script $ac_site_file" >&6;}    sed 's/^/| /' "$ac_site_file" >&5    . "$ac_site_file"  fidoneif test -r "$cache_file"; then  # Some versions of bash will fail to source /dev/null (special  # files actually), so we avoid doing that.  if test -f "$cache_file"; then    { echo "$as_me:$LINENO: loading cache $cache_file" >&5echo "$as_me: loading cache $cache_file" >&6;}    case $cache_file in      [\\/]* | ?:[\\/]* ) . $cache_file;;      *)                      . ./$cache_file;;    esac  fielse  { echo "$as_me:$LINENO: creating cache $cache_file" >&5echo "$as_me: creating cache $cache_file" >&6;}  >$cache_filefi# Check that the precious variables saved in the cache have kept the same# value.ac_cache_corrupted=falsefor ac_var in `(set) 2>&1 |	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do  eval ac_old_set=\$ac_cv_env_${ac_var}_set  eval ac_new_set=\$ac_env_${ac_var}_set  eval ac_old_val="\$ac_cv_env_${ac_var}_value"  eval ac_new_val="\$ac_env_${ac_var}_value"  case $ac_old_set,$ac_new_set in    set,)      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}      ac_cache_corrupted=: ;;    ,set)      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}      ac_cache_corrupted=: ;;    ,);;    *)      if test "x$ac_old_val" != "x$ac_new_val"; then	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5echo "$as_me:   former value:  $ac_old_val" >&2;}	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5echo "$as_me:   current value: $ac_new_val" >&2;}	ac_cache_corrupted=:      fi;;  esac  # Pass precious variables to config.status.  if test "$ac_new_set" = set; then    case $ac_new_val in    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;    *) ac_arg=$ac_var=$ac_new_val ;;    esac    case " $ac_configure_args " in      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;    esac  fidoneif $ac_cache_corrupted; then  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5echo "$as_me: error: changes in the environment can compromise the build" >&2;}  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}   { (exit 1); exit 1; }; }fiac_ext=cac_cpp='$CPP $CPPFLAGS'ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'ac_compiler_gnu=$ac_cv_c_compiler_gnuam__api_version="1.9"ac_aux_dir=for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do  if test -f $ac_dir/install-sh; then    ac_aux_dir=$ac_dir    ac_install_sh="$ac_aux_dir/install-sh -c"    break  elif test -f $ac_dir/install.sh; then    ac_aux_dir=$ac_dir    ac_install_sh="$ac_aux_dir/install.sh -c"    break  elif test -f $ac_dir/shtool; then    ac_aux_dir=$ac_dir    ac_install_sh="$ac_aux_dir/shtool install -c"    break  fidoneif test -z "$ac_aux_dir"; then  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}   { (exit 1); exit 1; }; }fiac_config_guess="$SHELL $ac_aux_dir/config.guess"ac_config_sub="$SHELL $ac_aux_dir/config.sub"ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.# Find a good install program.  We prefer a C program (faster),# so one script is as good as another.  But avoid the broken or# incompatible versions:# SysV /etc/install, /usr/sbin/install# SunOS /usr/etc/install# IRIX /sbin/install# AIX /bin/install# AmigaOS /C/install, which installs bootblocks on floppy discs# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag# AFS /usr/afsws/bin/install, which mishandles nonexistent args# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"# OS/2's system install, which has a completely different semantic# ./install, which can be erroneously created by make from ./install.sh.echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6if test -z "$INSTALL"; thenif test "${ac_cv_path_install+set}" = set; then  echo $ECHO_N "(cached) $ECHO_C" >&6else  as_save_IFS=$IFS; IFS=$PATH_SEPARATORfor as_dir in $PATHdo  IFS=$as_save_IFS  test -z "$as_dir" && as_dir=.  # Account for people who put trailing slashes in PATH elements.case $as_dir/ in  ./ | .// | /cC/* | \  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \  /usr/ucb/* ) ;;  *)    # OSF1 and SCO ODT 3.0 have their own names for install.    # Don't use installbsd from OSF since it installs stuff as root    # by default.    for ac_prog in ginstall scoinst install; do      for ac_exec_ext in '' $ac_executable_extensions; do	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then	  if test $ac_prog = install &&	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then	    # AIX install.  It has an incompatible calling convention.	    :	  elif test $ac_prog = install &&	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then	    # program-specific install script used by HP pwplus--don't use.	    :	  else	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"	    break 3	  fi	fi      done    done    ;;esacdonefi  if test "${ac_cv_path_install+set}" = set; then    INSTALL=$ac_cv_path_install  else    # As a last resort, use the slow shell script.  We don't cache a    # path for INSTALL within a source directory, because that will    # break other packages using the cache if that directory is    # removed, or if the path is relative.    INSTALL=$ac_install_sh  fifiecho "$as_me:$LINENO: result: $INSTALL" >&5echo "${ECHO_T}$INSTALL" >&6# Use test -z because SunOS4 sh mishandles braces in ${var-val}.# It thinks the first close brace ends the variable substitution.test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'echo "$as_me:$LINENO: checking whether build environment is sane" >&5echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6# Just in casesleep 1echo timestamp > conftest.file# Do `set' in a subshell so we don't clobber the current shell's# arguments.  Must try -L first in case configure is actually a# symlink; some systems play weird games with the mod time of symlinks# (eg FreeBSD returns the mod time of the symlink's containing# directory).if (   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`   if test "$*" = "X"; then      # -L didn't work.      set X `ls -t $srcdir/configure conftest.file`   fi   rm -f conftest.file   if test "$*" != "X $srcdir/configure conftest.file" \      && test "$*" != "X conftest.file $srcdir/configure"; then      # If neither matched, then we have a broken ls.  This can happen      # if, for instance, CONFIG_SHELL is bash and it inherits a      # broken ls alias from the environment.  This has actually      # happened.  Such a system could not be considered "sane".      { { echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a brokenalias in your environment" >&5echo "$as_me: error: ls -t appears to fail.  Make sure there is not a brokenalias in your environment" >&2;}   { (exit 1); exit 1; }; }   fi   test "$2" = conftest.file   )then   # Ok.   :else   { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!Check your system clock" >&5echo "$as_me: error: newly created file is older than distributed files!Check your system clock" >&2;}   { (exit 1); exit 1; }; }fiecho "$as_me:$LINENO: result: yes" >&5echo "${ECHO_T}yes" >&6test "$program_prefix" != NONE &&  program_transform_name="s,^,$program_prefix,;$program_transform_name"# Use a double $ so make ignores it.test "$program_suffix" != NONE &&  program_transform_name="s,\$,$program_suffix,;$program_transform_name"# Double any \ or $.  echo might interpret backslashes.# By default was `s,x,x', remove it if useless.cat <<\_ACEOF >conftest.sed