<?xml version="1.0" encoding="UTF-8"?>
<!-- IMPORTANT: This is an internal file that has been generated
     by the Xilinx ISE software.  Any direct editing or
     changes made to this file may result in unpredictable
     behavior or data corruption.  It is strongly advised that
     users do not edit the contents of this file. -->
<messages>
<msg type="warning" file="LIT" num="243" delta="unknown" >Logical network <arg fmt="%s" index="1">rd_clk_core_inst/LOCKED_OUT</arg> has no load.
</msg>

<msg type="info" file="MapLib" num="562" delta="unknown" >No environment variables are currently set.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="warning" file="MapLib" num="866" delta="unknown" >Your design is using FIFO16 primitives, Please note that there are additional requirements for the FIFO16 to guarantee full functionality. For more information regarding requirements for the FIFO16 primitive, please see Answer Record 22462.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.
</msg>

<msg type="info" file="MapLib" num="797" delta="unknown" >Your design is targeting <arg fmt="%s" index="1">LX/SX Production Step 0/1/ES</arg> devices. Please note that there are new specifications for the DCMs to guarantee maximum frequency performance. If the DCM input clock might stop or if the DCM reset might be asserted for an extended time, then use of the dcm_standby macro may be required. Please see Answer Record 21127.