set -xsthdpdir E:/linpingping/ATCA_converge_board/LVDS_Serdes_list_FPGA1/xst\
set -checkcmdline no
run -ifn lvds_bist_top.prj -ifmt mixed -ofn lvds_bist_top -ofmt NGC -p xc5vfx130t-1-ff1738 -top lvds_bist_top -opt_mode Speed -opt_level 1 -power NO -iuc NO -lso lvds_bist_top.lso -keep_hierarchy YES -netlist_hierarchy as_optimized -rtlview Yes -glob_opt AllClockNets -read_cores YES -write_timing_constraints NO -cross_clock_analysis NO -hierarchy_separator / -bus_delimiter <> -case maintain -slice_utilization_ratio 100 -bram_utilization_ratio 100 -dsp_utilization_ratio 100 -lc off -reduce_control_sets off -verilog2001 YES -fsm_extract YES -fsm_encoding Auto -safe_implementation No -fsm_style lut -ram_extract Yes -ram_style Auto -rom_extract Yes -mux_style Auto -decoder_extract YES -priority_extract YES -shreg_extract YES -shift_extract YES -xor_collapse YES -rom_style Auto -auto_bram_packing NO -mux_extract YES -resource_sharing YES -async_to_sync NO -use_dsp48 auto -iobuf YES -max_fanout 100000 -bufg 32 -register_duplication YES -register_balancing No -slice_packing YES -optimize_primitives NO -use_clock_enable Auto -use_sync_set Auto -use_sync_reset Auto -iob auto -equivalent_register_removal YES -slice_utilization_ratio_maxmargin 5 -crit Speed -opt_level_power 1 -mapstyle lut -fsm_encoding Auto -t XILINX -addsub_extract yes