//
// Copyright (c) Microsoft Corporation.  All rights reserved.
//
//
// Use of this source code is subject to the terms of the Microsoft end-user
// license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
// If you did not accept the terms of the EULA, you are not authorized to use
// this source code. For a copy of the EULA, please see the LICENSE.RTF on your
// install media.
//
/*++
THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE.

   
Module Name:	I2S.CPP

Abstract:		I2S Interface Routines for Samsung SC2440 CPU
  
Environment:	Samsung SC2440 CPU and Windows 3.0 (or later)
    
-*/


#include <windows.h>
#include <s3c2440x.h>


//===================== Register Configuration Constants ======================

#define IIS_INTERNAL_CLOCK_ENABLE		(1<<17)					// Enable CPU clock to IIS controller

//----- GPIO Configuration Masks -----
#define ENABLE_I2SSDO					0x00000200
#define ENABLE_I2SSDI					0x00000080
#define ENABLE_I2SCDCLK					0x00000020
#define ENABLE_I2SSCLK					0x00000008
#define ENABLE_I2SLRCLK					0x00000002
#define DISABLE_I2S_PULLUPS				0x0000001F

//----- Register definitions for IISCON control register (global config register) -----
#define LR_CHANNEL_INDEX				0x00000100				// Left/right channel index			(read-only)		
#define TRANSMIT_FIFO_READY				0x00000080				// Indicates transmit FIFO is ready	(read-only)
#define RECEIVE_FIFO_READY				0x00000040				// Indicates receive FIFO is ready	(read-only)
#define TRANSMIT_DMA_REQUEST_ENABLE		0x00000020				// Enables transmit DMA request
#define RECEIVE_DMA_REQUEST_ENABLE		0x00000010				// Enables receive DMA request
#define TRANSMIT_IDLE_CMD				0x00000008				// Pauses transmit
#define RECEIVE_IDLE_CMD				0x00000004				// Pauses receive
#define IIS_PRESCALER_ENABLE			0x00000002				// Enables clock prescaler
#define IIS_INTERFACE_ENABLE			0x00000001				// Enables IIS controller

//----- Register definitions for IISMOD status register (global status register) -----
#define IIS_MASTER_MODE					0x00000000				// Selects master/slave mode
#define IIS_SLAVE_MODE					0x00000100				
#define IIS_NOTRANSFER_MODE				0x00000000				// Selects transfer mode
#define IIS_RECEIVE_MODE				0x00000040
#define IIS_TRANSMIT_MODE				0x00000080
#define IIS_TRANSMIT_RECEIVE_MODE		0x000000C0
#define ACTIVE_CHANNEL_LEFT				0x00000000				// Selects active channel
#define ACTIVE_CHANNEL_RIGHT			0x00000020
#define SERIAL_INTERFACE_IIS_COMPAT		0x00000000				// Selects serial interface format
#define SERIAL_INTERFACE_MSBL_COMPAT	0x00000010
#define DATA_8_BITS_PER_CHANNEL			0x00000000				// Selects # of data bits per channel
#define DATA_16_BITS_PER_CHANNEL		0x00000008				
#define MASTER_CLOCK_FREQ_256fs			0x00000000				// Selects master clock frequency
#define MASTER_CLOCK_FREQ_384fs			0x00000004				
#define SERIAL_BIT_CLOCK_FREQ_16fs		0x00000000				// Selects serial data bit clock frequency
#define SERIAL_BIT_CLOCK_FREQ_32fs		0x00000001				
#define SERIAL_BIT_CLOCK_FREQ_48fs		0x00000002				


//----- Register definitions for IISPSR control register (global config register) -----
//		FORMAT:			bits[9:5] - Prescaler Control A
//						bits[4:0] - Prescaler Control B
//
//						Range: 0-31 and the division factor is N+1 (a.k.a. 1-32)
//
//		The I2SLRCLK frequency is determined as follows:
//
//				I2SLRCLK = CODECLK / I2SCDCLK		and		(prescaler+1) = PCLK / CODECLK
//
//		Thus, rearranging the equations a bit we can see that:
//
//				prescaler = (PCLK / CODECLK) - 1 
//		or
//				prescaler = ((PCLK / (IS2LRCLK * IS2CDCLK)) - 1
//		
// Here are some popular values for IS2LRCLK:
//		
#define IS2LRCLK_800					800
#define IS2LRCLK_11025					11025
#define IS2LRCLK_16000					16000
#define IS2LRCLK_22050					22050
#define IS2LRCLK_32000					32000
#define IS2LRCLK_44100					44100
#define IS2LRCLK_48000					48000
#define IS2LRCLK_64000					64000
#define IS2LRCLK_88200					88200
#define IS2LRCLK_96000					96000
	

//----- Register definitions for IISFCON control register (global config register) -----
#define TRANSMIT_FIFO_ACCESS_NORMAL		0x00000000				// Selects the transmit FIFO access mode
#define TRANSMIT_FIFO_ACCESS_DMA		0x00008000				
#define RECEIVE_FIFO_ACCESS_NORMAL		0x00000000				// Selects the receive FIFO access mode
#define RECEIVE_FIFO_ACCESS_DMA			0x00004000				
#define TRANSMIT_FIFO_ENABLE			0x00002000				// Enables transmit FIFO
#define RECEIVE_FIFO_ENABLE				0x00001000				// Enables receive FIFO
//
// READ-ONLY Fields:	bits[11:6] - Transmit FIFO datacount
//						bits[5:0]  - Receive FIFO datacount

//----- Register definitions for IISFIFO control register (global config register) -----
//		NOTE: This register is used to access the transmit/receive FIFO
#define MAX_TRANSMIT_FIFO_ENTRIES		24
#define MAX_RECEIVE_FIFO_ENTRIES		24

//=============================================================================

//-------------------------- Public Interface ------------------------------
BOOL I2S_Init();
BOOL I2S_Deinit();
BOOL I2S_WriteData(LPWORD lpBuff, DWORD dwLen);

//-------------------- Private Interface (Helper routines) ------------------
VOID StartI2SClock(VOID);
VOID StopI2SClock(VOID);
VOID SetI2SClockRate(DWORD ClockRate);