--------------------------------------------------------------------------------
--
--  P H I L I P S  C O M P A N Y  R E S T R I C T E D
--                                         
--  Copyright (c) 1998.                    
--
--  Philips Electronics N.V.
--
--  Philips Semiconductors
--  Interconnectivity and Processor Peripheral group
--  Bangalore,India
--  All rights reserved. Reproduction in whole or in part is prohibited
--  without the written permission of the copyright owner.
--
--------------------------------------------------------------------------------
--
--  File            : usb_new_usbpvci_ent.vhdl 
--
--  Module          : USBPVCI 
--
--  Project         : VPB bus Interface to USB 1.1 Device(USBFS22)
--
--  Author          :              
--
--  Description     : The entity of USBPVCI block
--
--  Status          : 
--
--  Contact address : 
--
--------------------------------------------------------------------------------

library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.numeric_std.all;

library work;
use work.PCK_GENERAL.all;
use work.PCK_CONFIGURATION.all;
use work.PCK_SETUP.all;
use work.PCK_HANDLERS.all;
use work.PCK_USB.all;

library work;
use work.PCK_APB.all;

entity USBPVCI is
   port(
        -- USB Clocks

        USB_BitClk:               in  std_logic;                     -- Recovered bit clock 12 Mhz
        USB_BitClk_Out:           out std_logic;                     -- Recovered bit clock 12 Mhz
        USB_MainClk:              in  std_logic;                     -- Main clock 48 Mhz
        USB_NeedClk:              out std_logic;                     -- USB Core needs clock

        -- Connect

        USB_Connect_N:            out std_logic;                     -- Controls switch for softconnect
        USB_VBus:                 in  std_logic;                     -- Bus power is present

        -- Test signal

        USB_TestMode:             in  std_logic;                     -- Select test mode

	-- USB asynchronous reset
	USB_AsynReset_N:          in  std_logic;

        -- Interface to SRAM

        USB_RxRAM_E_N:            out std_logic;                     -- RAM chip enable
        USB_RxRAM_W_N:            out std_logic;                     -- RAM write enable
        USB_RxRAM_G_N:            out std_logic;                     -- RAM read enable
        USB_RxRAM_A:              out std_logic_vector(RxRAMAddr_Width-1 downto 0); -- RAM address
        USB_RxRAM_DQ_In:          in  std_logic_vector(31 downto 0); -- RAM data out bus
        USB_RxRAM_DQ_Out:         out std_logic_vector(31 downto 0); -- RAM data in bus  
        USB_TxRAM_E_N:            out std_logic;                     -- RAM chip enable
        USB_TxRAM_W_N:            out std_logic;                     -- RAM write enable
        USB_TxRAM_G_N:            out std_logic;                     -- RAM read enable
        USB_TxRAM_A:              out std_logic_vector(TxRAMAddr_Width-1 downto 0); -- RAM address
        USB_TxRAM_DQ_In:          in  std_logic_vector(31 downto 0); -- RAM data out bus
        USB_TxRAM_DQ_Out:         out std_logic_vector(31 downto 0); -- RAM data in bus

        -- Suspend

        USB_Suspend:              out std_logic;                     -- Suspend

        -- Interface to APB WRAPPER

        r_data:                   out std_logic_vector(31 downto 0); -- Read data
        gnt:                      out std_logic;                     -- Grant
        clk:                      in  std_logic;                     -- Clock
        pvci_reset_n:             in  std_logic;                     -- Reset
        req:                      in  std_logic;                     -- Request
        address:                  in  std_logic_vector(7 downto 0);  -- Address
        rnw:                      in  std_logic;                     -- Read or Write
        w_data:                   in  std_logic_vector(31 downto 0); -- Write data
	error:                    out std_logic;                     -- error
        
	-- Interrupt request lines   

        USB_Int_Req_Irq:          out std_logic;                     -- Irq interrupt to the system
        USB_Int_Req_Fiq:          out std_logic;                     -- Fiq interrupt to the system

        USB_UP_LED_N:             out std_logic;                     -- LED
        USB_UP_RxDM:              in  std_logic;                     -- Rx D-
        USB_UP_RxDP:              in  std_logic;                     -- Rx D+
        USB_UP_RxRCV:             in  std_logic;                     -- Rx RCV
        USB_UP_TxDM:              out std_logic;                     -- Tx D-
        USB_UP_TxDP:              out std_logic;                     -- Tx D+
        USB_UP_TxEnable_N:        out std_logic                      -- Tx Enable
       );
end USBPVCI;