//////////////////////////////////////////////////////////////////////////////
//
//  Copyright (C) Microsoft Corporation.  All Rights Reserved.
//
//  File:       d3dx8mesh.h
//  Content:    D3DX mesh types and functions
//
//////////////////////////////////////////////////////////////////////////////

#include "d3dx8.h"

#ifndef __D3DX8MESH_H__
#define __D3DX8MESH_H__

#include "dxfile.h"     // defines LPDIRECTXFILEDATA

// {2A835771-BF4D-43f4-8E14-82A809F17D8A}
DEFINE_GUID(IID_ID3DXBaseMesh, 
0x2a835771, 0xbf4d, 0x43f4, 0x8e, 0x14, 0x82, 0xa8, 0x9, 0xf1, 0x7d, 0x8a);

// {CCAE5C3B-4DD1-4d0f-997E-4684CA64557F}
DEFINE_GUID(IID_ID3DXMesh, 
0xccae5c3b, 0x4dd1, 0x4d0f, 0x99, 0x7e, 0x46, 0x84, 0xca, 0x64, 0x55, 0x7f);

// {19FBE386-C282-4659-97BD-CB869B084A6C}
DEFINE_GUID(IID_ID3DXPMesh, 
0x19fbe386, 0xc282, 0x4659, 0x97, 0xbd, 0xcb, 0x86, 0x9b, 0x8, 0x4a, 0x6c);

// {4E3CA05C-D4FF-4d11-8A02-16459E08F6F4}
DEFINE_GUID(IID_ID3DXSPMesh, 
0x4e3ca05c, 0xd4ff, 0x4d11, 0x8a, 0x2, 0x16, 0x45, 0x9e, 0x8, 0xf6, 0xf4);

// {8DB06ECC-EBFC-408a-9404-3074B4773515}
DEFINE_GUID(IID_ID3DXSkinMesh, 
0x8db06ecc, 0xebfc, 0x408a, 0x94, 0x4, 0x30, 0x74, 0xb4, 0x77, 0x35, 0x15);

// Mesh options - lower 3 bytes only, upper byte used by _D3DXMESHOPT option flags
enum _D3DXMESH {
    D3DXMESH_32BIT                  = 0x001, // If set, then use 32 bit indices, if not set use 16 bit indices.
    D3DXMESH_DONOTCLIP              = 0x002, // Use D3DUSAGE_DONOTCLIP for VB & IB.
    D3DXMESH_POINTS                 = 0x004, // Use D3DUSAGE_POINTS for VB & IB. 
    D3DXMESH_RTPATCHES              = 0x008, // Use D3DUSAGE_RTPATCHES for VB & IB. 
    D3DXMESH_NPATCHES               = 0x4000,// Use D3DUSAGE_NPATCHES for VB & IB. 
    D3DXMESH_VB_SYSTEMMEM           = 0x010, // Use D3DPOOL_SYSTEMMEM for VB. Overrides D3DXMESH_MANAGEDVERTEXBUFFER
    D3DXMESH_VB_MANAGED             = 0x020, // Use D3DPOOL_MANAGED for VB. 
    D3DXMESH_VB_WRITEONLY           = 0x040, // Use D3DUSAGE_WRITEONLY for VB.
    D3DXMESH_VB_DYNAMIC             = 0x080, // Use D3DUSAGE_DYNAMIC for VB.
    D3DXMESH_VB_SOFTWAREPROCESSING = 0x8000, // Use D3DUSAGE_SOFTWAREPROCESSING for VB.
    D3DXMESH_IB_SYSTEMMEM           = 0x100, // Use D3DPOOL_SYSTEMMEM for IB. Overrides D3DXMESH_MANAGEDINDEXBUFFER
    D3DXMESH_IB_MANAGED             = 0x200, // Use D3DPOOL_MANAGED for IB.
    D3DXMESH_IB_WRITEONLY           = 0x400, // Use D3DUSAGE_WRITEONLY for IB.
    D3DXMESH_IB_DYNAMIC             = 0x800, // Use D3DUSAGE_DYNAMIC for IB.
    D3DXMESH_IB_SOFTWAREPROCESSING= 0x10000, // Use D3DUSAGE_SOFTWAREPROCESSING for IB.

    D3DXMESH_VB_SHARE               = 0x1000, // Valid for Clone* calls only, forces cloned mesh/pmesh to share vertex buffer

    D3DXMESH_USEHWONLY              = 0x2000, // Valid for ID3DXSkinMesh::ConvertToBlendedMesh

    // Helper options
    D3DXMESH_SYSTEMMEM              = 0x110, // D3DXMESH_VB_SYSTEMMEM | D3DXMESH_IB_SYSTEMMEM
    D3DXMESH_MANAGED                = 0x220, // D3DXMESH_VB_MANAGED | D3DXMESH_IB_MANAGED
    D3DXMESH_WRITEONLY              = 0x440, // D3DXMESH_VB_WRITEONLY | D3DXMESH_IB_WRITEONLY
    D3DXMESH_DYNAMIC                = 0x880, // D3DXMESH_VB_DYNAMIC | D3DXMESH_IB_DYNAMIC
    D3DXMESH_SOFTWAREPROCESSING   = 0x18000, // D3DXMESH_VB_SOFTWAREPROCESSING | D3DXMESH_IB_SOFTWAREPROCESSING

};

// option field values for specifying min value in D3DXGeneratePMesh and D3DXSimplifyMesh
enum _D3DXMESHSIMP
{
    D3DXMESHSIMP_VERTEX   = 0x1,
    D3DXMESHSIMP_FACE     = 0x2,

};

enum _MAX_FVF_DECL_SIZE
{
    MAX_FVF_DECL_SIZE = 20
};

typedef struct ID3DXBaseMesh *LPD3DXBASEMESH;
typedef struct ID3DXMesh *LPD3DXMESH;
typedef struct ID3DXPMesh *LPD3DXPMESH;
typedef struct ID3DXSPMesh *LPD3DXSPMESH;
typedef struct ID3DXSkinMesh *LPD3DXSKINMESH;

typedef struct _D3DXATTRIBUTERANGE
{
    DWORD AttribId;
    DWORD FaceStart;
    DWORD FaceCount;
    DWORD VertexStart;
    DWORD VertexCount;
} D3DXATTRIBUTERANGE;

typedef D3DXATTRIBUTERANGE* LPD3DXATTRIBUTERANGE;

#ifdef __cplusplus
extern "C" {
#endif //__cplusplus
struct D3DXMATERIAL
{
    D3DMATERIAL8  MatD3D;
    LPSTR         pTextureFilename;
};
typedef struct D3DXMATERIAL *LPD3DXMATERIAL;
#ifdef __cplusplus
}
#endif //__cplusplus

typedef struct _D3DXATTRIBUTEWEIGHTS
{
    FLOAT Position;
    FLOAT Boundary;
    FLOAT Normal;
    FLOAT Diffuse;
    FLOAT Specular;
    FLOAT Tex[8];
} D3DXATTRIBUTEWEIGHTS;

typedef D3DXATTRIBUTEWEIGHTS* LPD3DXATTRIBUTEWEIGHTS;

enum _D3DXWELDEPSILONSFLAGS
{
    D3DXWELDEPSILONS_WELDALL = 0x1,              // weld all vertices marked by adjacency as being overlapping

    D3DXWELDEPSILONS_WELDPARTIALMATCHES = 0x2,   // if a given vertex component is within epsilon, modify partial matched 
                                                    // vertices so that both components identical AND if all components "equal"
                                                    // remove one of the vertices
    D3DXWELDEPSILONS_DONOTREMOVEVERTICES = 0x4,  // instructs weld to only allow modifications to vertices and not removal
                                                    // ONLY valid if D3DXWELDEPSILONS_WELDPARTIALMATCHES is set
                                                    // useful to modify vertices to be equal, but not allow vertices to be removed
};

typedef struct _D3DXWELDEPSILONS
{
    FLOAT SkinWeights;
    FLOAT Normal;
    FLOAT Tex[8];
    DWORD Flags;
} D3DXWELDEPSILONS;

typedef D3DXWELDEPSILONS* LPD3DXWELDEPSILONS;


#undef INTERFACE
#define INTERFACE ID3DXBaseMesh

DECLARE_INTERFACE_(ID3DXBaseMesh, IUnknown)
{
    // IUnknown
    STDMETHOD(QueryInterface)(THIS_ REFIID iid, LPVOID *ppv) PURE;
    STDMETHOD_(ULONG, AddRef)(THIS) PURE;
    STDMETHOD_(ULONG, Release)(THIS) PURE;

    // ID3DXBaseMesh
    STDMETHOD(DrawSubset)(THIS_ DWORD AttribId) PURE;
    STDMETHOD_(DWORD, GetNumFaces)(THIS) PURE;
    STDMETHOD_(DWORD, GetNumVertices)(THIS) PURE;
    STDMETHOD_(DWORD, GetFVF)(THIS) PURE;
    STDMETHOD(GetDeclaration)(THIS_ DWORD Declaration[MAX_FVF_DECL_SIZE]) PURE;
    STDMETHOD_(DWORD, GetOptions)(THIS) PURE;
    STDMETHOD(GetDevice)(THIS_ LPDIRECT3DDEVICE8* ppDevice) PURE;
    STDMETHOD(CloneMeshFVF)(THIS_ DWORD Options, 
                DWORD FVF, LPDIRECT3DDEVICE8 pD3DDevice, LPD3DXMESH* ppCloneMesh) PURE;
    STDMETHOD(CloneMesh)(THIS_ DWORD Options, 
                CONST DWORD *pDeclaration, LPDIRECT3DDEVICE8 pD3DDevice, LPD3DXMESH* ppCloneMesh) PURE;
    STDMETHOD(GetVertexBuffer)(THIS_ LPDIRECT3DVERTEXBUFFER8* ppVB) PURE;
    STDMETHOD(GetIndexBuffer)(THIS_ LPDIRECT3DINDEXBUFFER8* ppIB) PURE;
    STDMETHOD(LockVertexBuffer)(THIS_ DWORD Flags, BYTE** ppData) PURE;
    STDMETHOD(UnlockVertexBuffer)(THIS) PURE;
    STDMETHOD(LockIndexBuffer)(THIS_ DWORD Flags, BYTE** ppData) PURE;
    STDMETHOD(UnlockIndexBuffer)(THIS) PURE;
    STDMETHOD(GetAttributeTable)(
                THIS_ D3DXATTRIBUTERANGE *pAttribTable, DWORD* pAttribTableSize) PURE;

    STDMETHOD(ConvertPointRepsToAdjacency)(THIS_ CONST DWORD* pPRep, DWORD* pAdjacency) PURE;
    STDMETHOD(ConvertAdjacencyToPointReps)(THIS_ CONST DWORD* pAdjacency, DWORD* pPRep) PURE;
    STDMETHOD(GenerateAdjacency)(THIS_ FLOAT Epsilon, DWORD* pAdjacency) PURE;
};


#undef INTERFACE
#define INTERFACE ID3DXMesh

DECLARE_INTERFACE_(ID3DXMesh, ID3DXBaseMesh)
{
    // IUnknown
    STDMETHOD(QueryInterface)(THIS_ REFIID iid, LPVOID *ppv) PURE;
    STDMETHOD_(ULONG, AddRef)(THIS) PURE;
    STDMETHOD_(ULONG, Release)(THIS) PURE;

    // ID3DXBaseMesh
    STDMETHOD(DrawSubset)(THIS_ DWORD AttribId) PURE;
    STDMETHOD_(DWORD, GetNumFaces)(THIS) PURE;
    STDMETHOD_(DWORD, GetNumVertices)(THIS) PURE;
    STDMETHOD_(DWORD, GetFVF)(THIS) PURE;
    STDMETHOD(GetDeclaration)(THIS_ DWORD Declaration[MAX_FVF_DECL_SIZE]) PURE;
    STDMETHOD_(DWORD, GetOptions)(THIS) PURE;
    STDMETHOD(GetDevice)(THIS_ LPDIRECT3DDEVICE8* ppDevice) PURE;
    STDMETHOD(CloneMeshFVF)(THIS_ DWORD Options, 
                DWORD FVF, LPDIRECT3DDEVICE8 pD3DDevice, LPD3DXMESH* ppCloneMesh) PURE;
    STDMETHOD(CloneMesh)(THIS_ DWORD Options, 
                CONST DWORD *pDeclaration, LPDIRECT3DDEVICE8 pD3DDevice, LPD3DXMESH* ppCloneMesh) PURE;
    STDMETHOD(GetVertexBuffer)(THIS_ LPDIRECT3DVERTEXBUFFER8* ppVB) PURE;
    STDMETHOD(GetIndexBuffer)(THIS_ LPDIRECT3DINDEXBUFFER8* ppIB) PURE;
    STDMETHOD(LockVertexBuffer)(THIS_ DWORD Flags, BYTE** ppData) PURE;
    STDMETHOD(UnlockVertexBuffer)(THIS) PURE;
    STDMETHOD(LockIndexBuffer)(THIS_ DWORD Flags, BYTE** ppData) PURE;
    STDMETHOD(UnlockIndexBuffer)(THIS) PURE;
    STDMETHOD(GetAttributeTable)(
                THIS_ D3DXATTRIBUTERANGE *pAttribTable, DWORD* pAttribTableSize) PURE;

    STDMETHOD(ConvertPointRepsToAdjacency)(THIS_ CONST DWORD* pPRep, DWORD* pAdjacency) PURE;
    STDMETHOD(ConvertAdjacencyToPointReps)(THIS_ CONST DWORD* pAdjacency, DWORD* pPRep) PURE;
    STDMETHOD(GenerateAdjacency)(THIS_ FLOAT Epsilon, DWORD* pAdjacency) PURE;

    // ID3DXMesh
    STDMETHOD(LockAttributeBuffer)(THIS_ DWORD Flags, DWORD** ppData) PURE;
    STDMETHOD(UnlockAttributeBuffer)(THIS) PURE;
    STDMETHOD(Optimize)(THIS_ DWORD Flags, CONST DWORD* pAdjacencyIn, DWORD* pAdjacencyOut, 
                     DWORD* pFaceRemap, LPD3DXBUFFER *ppVertexRemap,  
                     LPD3DXMESH* ppOptMesh) PURE;
    STDMETHOD(OptimizeInplace)(THIS_ DWORD Flags, CONST DWORD* pAdjacencyIn, DWORD* pAdjacencyOut, 
                     DWORD* pFaceRemap, LPD3DXBUFFER *ppVertexRemap) PURE;

};


#undef INTERFACE
#define INTERFACE ID3DXPMesh

DECLARE_INTERFACE_(ID3DXPMesh, ID3DXBaseMesh)
{
    // IUnknown
    STDMETHOD(QueryInterface)(THIS_ REFIID iid, LPVOID *ppv) PURE;
    STDMETHOD_(ULONG, AddRef)(THIS) PURE;
    STDMETHOD_(ULONG, Release)(THIS) PURE;

    // ID3DXBaseMesh
    STDMETHOD(DrawSubset)(THIS_ DWORD AttribId) PURE;
    STDMETHOD_(DWORD, GetNumFaces)(THIS) PURE;
    STDMETHOD_(DWORD, GetNumVertices)(THIS) PURE;
    STDMETHOD_(DWORD, GetFVF)(THIS) PURE;
    STDMETHOD(GetDeclaration)(THIS_ DWORD Declaration[MAX_FVF_DECL_SIZE]) PURE;
    STDMETHOD_(DWORD, GetOptions)(THIS) PURE;
    STDMETHOD(GetDevice)(THIS_ LPDIRECT3DDEVICE8* ppDevice) PURE;
    STDMETHOD(CloneMeshFVF)(THIS_ DWORD Options, 
                DWORD FVF, LPDIRECT3DDEVICE8 pD3DDevice, LPD3DXMESH* ppCloneMesh) PURE;
    STDMETHOD(CloneMesh)(THIS_ DWORD Options, 
                CONST DWORD *pDeclaration, LPDIRECT3DDEVICE8 pD3DDevice, LPD3DXMESH* ppCloneMesh) PURE;
    STDMETHOD(GetVertexBuffer)(THIS_ LPDIRECT3DVERTEXBUFFER8* ppVB) PURE;
    STDMETHOD(GetIndexBuffer)(THIS_ LPDIRECT3DINDEXBUFFER8* ppIB) PURE;
    STDMETHOD(LockVertexBuffer)(THIS_ DWORD Flags, BYTE** ppData) PURE;
    STDMETHOD(UnlockVertexBuffer)(THIS) PURE;
    STDMETHOD(LockIndexBuffer)(THIS_ DWORD Flags, BYTE** ppData) PURE;
    STDMETHOD(UnlockIndexBuffer)(THIS) PURE;
    STDMETHOD(GetAttributeTable)(
                THIS_ D3DXATTRIBUTERANGE *pAttribTable, DWORD* pAttribTableSize) PURE;

    STDMETHOD(ConvertPointRepsToAdjacency)(THIS_ CONST DWORD* pPRep, DWORD* pAdjacency) PURE;
    STDMETHOD(ConvertAdjacencyToPointReps)(THIS_ CONST DWORD* pAdjacency, DWORD* pPRep) PURE;
    STDMETHOD(GenerateAdjacency)(THIS_ FLOAT Epsilon, DWORD* pAdjacency) PURE;

    // ID3DXPMesh
    STDMETHOD(ClonePMeshFVF)(THIS_ DWORD Options, 
                DWORD FVF, LPDIRECT3DDEVICE8 pD3D, LPD3DXPMESH* ppCloneMesh) PURE;
    STDMETHOD(ClonePMesh)(THIS_ DWORD Options, 
                CONST DWORD *pDeclaration, LPDIRECT3DDEVICE8 pD3D, LPD3DXPMESH* ppCloneMesh) PURE;
    STDMETHOD(SetNumFaces)(THIS_ DWORD Faces) PURE;
    STDMETHOD(SetNumVertices)(THIS_ DWORD Vertices) PURE;
    STDMETHOD_(DWORD, GetMaxFaces)(THIS) PURE;
    STDMETHOD_(DWORD, GetMinFaces)(THIS) PURE;
    STDMETHOD_(DWORD, GetMaxVertices)(THIS) PURE;
    STDMETHOD_(DWORD, GetMinVertices)(THIS) PURE;
    STDMETHOD(Save)(THIS_ IStream *pStream, LPD3DXMATERIAL pMaterials, DWORD NumMaterials) PURE;

    STDMETHOD(Optimize)(THIS_ DWORD Flags, DWORD* pAdjacencyOut, 
                     DWORD* pFaceRemap, LPD3DXBUFFER *ppVertexRemap,  
                     LPD3DXMESH* ppOptMesh) PURE;

    STDMETHOD(OptimizeBaseLOD)(THIS_ DWORD Flags, DWORD* pFaceRemap) PURE;
    STDMETHOD(TrimByFaces)(THIS_ DWORD NewFacesMin, DWORD NewFacesMax, DWORD *rgiFaceRemap, DWORD *rgiVertRemap) PURE;
    STDMETHOD(TrimByVertices)(THIS_ DWORD NewVerticesMin, DWORD NewVerticesMax, DWORD *rgiFaceRemap, DWORD *rgiVertRemap) PURE;

    STDMETHOD(GetAdjacency)(THIS_ DWORD* pAdjacency) PURE;
};


#undef INTERFACE
#define INTERFACE ID3DXSPMesh

DECLARE_INTERFACE_(ID3DXSPMesh, IUnknown)
{
    // IUnknown
    STDMETHOD(QueryInterface)(THIS_ REFIID iid, LPVOID *ppv) PURE;
    STDMETHOD_(ULONG, AddRef)(THIS) PURE;
    STDMETHOD_(ULONG, Release)(THIS) PURE;

    // ID3DXSPMesh
    STDMETHOD_(DWORD, GetNumFaces)(THIS) PURE;
    STDMETHOD_(DWORD, GetNumVertices)(THIS) PURE;
    STDMETHOD_(DWORD, GetFVF)(THIS) PURE;
    STDMETHOD(GetDeclaration)(THIS_ DWORD Declaration[MAX_FVF_DECL_SIZE]) PURE;
    STDMETHOD_(DWORD, GetOptions)(THIS) PURE;
    STDMETHOD(GetDevice)(THIS_ LPDIRECT3DDEVICE8* ppDevice) PURE;
    STDMETHOD(CloneMeshFVF)(THIS_ DWORD Options, 
                DWORD FVF, LPDIRECT3DDEVICE8 pD3D, DWORD *pAdjacencyOut, DWORD *pVertexRemapOut, LPD3DXMESH* ppCloneMesh) PURE;
    STDMETHOD(CloneMesh)(THIS_ DWORD Options, 
                CONST DWORD *pDeclaration, LPDIRECT3DDEVICE8 pD3DDevice, DWORD *pAdjacencyOut, DWORD *pVertexRemapOut, LPD3DXMESH* ppCloneMesh) PURE;
    STDMETHOD(ClonePMeshFVF)(THIS_ DWORD Options, 
                DWORD FVF, LPDIRECT3DDEVICE8 pD3D, DWORD *pVertexRemapOut, LPD3DXPMESH* ppCloneMesh) PURE;
    STDMETHOD(ClonePMesh)(THIS_ DWORD Options, 
                CONST DWORD *pDeclaration, LPDIRECT3DDEVICE8 pD3D, DWORD *pVertexRemapOut, LPD3DXPMESH* ppCloneMesh) PURE;
    STDMETHOD(ReduceFaces)(THIS_ DWORD Faces) PURE;
    STDMETHOD(ReduceVertices)(THIS_ DWORD Vertices) PURE;
    STDMETHOD_(DWORD, GetMaxFaces)(THIS) PURE;
    STDMETHOD_(DWORD, GetMaxVertices)(THIS) PURE;
    STDMETHOD(GetVertexAttributeWeights)(THIS_ LPD3DXATTRIBUTEWEIGHTS pVertexAttributeWeights) PURE;
    STDMETHOD(GetVertexWeights)(THIS_ FLOAT *pVertexWeights) PURE;
};

#define UNUSED16 (0xffff)
#define UNUSED32 (0xffffffff)

// ID3DXMesh::Optimize options - upper byte only, lower 3 bytes used from _D3DXMESH option flags
enum _D3DXMESHOPT {
    D3DXMESHOPT_COMPACT       = 0x01000000,
    D3DXMESHOPT_ATTRSORT      = 0x02000000,
    D3DXMESHOPT_VERTEXCACHE   = 0x04000000,
    D3DXMESHOPT_STRIPREORDER  = 0x08000000,
    D3DXMESHOPT_IGNOREVERTS   = 0x10000000,  // optimize faces only, don't touch vertices
    D3DXMESHOPT_SHAREVB       =     0x1000,         // same as D3DXMESH_VB_SHARE
};

// Subset of the mesh that has the same attribute and bone combination.
// This subset can be rendered in a single draw call
typedef struct _D3DXBONECOMBINATION
{
    DWORD AttribId;
    DWORD FaceStart;
    DWORD FaceCount;
    DWORD VertexStart;
    DWORD VertexCount;
    DWORD* BoneId;
} D3DXBONECOMBINATION, *LPD3DXBONECOMBINATION;


#undef INTERFACE
#define INTERFACE ID3DXSkinMesh

DECLARE_INTERFACE_(ID3DXSkinMesh, IUnknown)
{
    // IUnknown
    STDMETHOD(QueryInterface)(THIS_ REFIID iid, LPVOID *ppv) PURE;
    STDMETHOD_(ULONG, AddRef)(THIS) PURE;
    STDMETHOD_(ULONG, Release)(THIS) PURE;

    // ID3DXMesh
    STDMETHOD_(DWORD, GetNumFaces)(THIS) PURE;
    STDMETHOD_(DWORD, GetNumVertices)(THIS) PURE;
    STDMETHOD_(DWORD, GetFVF)(THIS) PURE;
    STDMETHOD(GetDeclaration)(THIS_ DWORD Declaration[MAX_FVF_DECL_SIZE]) PURE;
    STDMETHOD_(DWORD, GetOptions)(THIS) PURE;
    STDMETHOD(GetDevice)(THIS_ LPDIRECT3DDEVICE8* ppDevice) PURE;
    STDMETHOD(GetVertexBuffer)(THIS_ LPDIRECT3DVERTEXBUFFER8* ppVB) PURE;
    STDMETHOD(GetIndexBuffer)(THIS_ LPDIRECT3DINDEXBUFFER8* ppIB) PURE;
    STDMETHOD(LockVertexBuffer)(THIS_ DWORD flags, BYTE** ppData) PURE;
    STDMETHOD(UnlockVertexBuffer)(THIS) PURE;
    STDMETHOD(LockIndexBuffer)(THIS_ DWORD flags, BYTE** ppData) PURE;
    STDMETHOD(UnlockIndexBuffer)(THIS) PURE;
    STDMETHOD(LockAttributeBuffer)(THIS_ DWORD flags, DWORD** ppData) PURE;
    STDMETHOD(UnlockAttributeBuffer)(THIS) PURE;
    // ID3DXSkinMesh
    STDMETHOD_(DWORD, GetNumBones)(THIS) PURE;
    STDMETHOD(GetOriginalMesh)(THIS_ LPD3DXMESH* ppMesh) PURE;
    STDMETHOD(SetBoneInfluence)(THIS_ DWORD bone, DWORD numInfluences, CONST DWORD* vertices, CONST FLOAT* weights) PURE;
    STDMETHOD_(DWORD, GetNumBoneInfluences)(THIS_ DWORD bone) PURE;
    STDMETHOD(GetBoneInfluence)(THIS_ DWORD bone, DWORD* vertices, FLOAT* weights) PURE;
    STDMETHOD(GetMaxVertexInfluences)(THIS_ DWORD* maxVertexInfluences) PURE;
    STDMETHOD(GetMaxFaceInfluences)(THIS_ DWORD* maxFaceInfluences) PURE;