Info: *******************************************************************
Info: Running Quartus II Fitter
    Info: Version 7.0 Build 33 02/05/2007 SJ Full Version
    Info: Processing started: Fri Nov 14 15:59:28 2008
Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off display -c display
Info: Selected device EP1C12F324C8 for design "display"
Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time
Info: The Fitter has identified 1 logical partitions of which 0 have a previous placement to use
    Info: Previous placement does not exist for 176 of 176 atoms in partition Top
Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices
    Info: Device EP1C4F324C8 is compatible
    Info: Device EP1C20F324C8 is compatible
Info: Fitter converted 2 user pins into dedicated programming pins
    Info: Pin ~nCSO~ is reserved at location J1
    Info: Pin ~ASDO~ is reserved at location K6
Warning: No exact pin location assignment(s) for 21 pins of 52 total pins
    Info: Pin flash not assigned to an exact location on the device
    Info: Pin led7[0] not assigned to an exact location on the device
    Info: Pin led7[1] not assigned to an exact location on the device
    Info: Pin led7[2] not assigned to an exact location on the device
    Info: Pin led7[3] not assigned to an exact location on the device
    Info: Pin led3[0] not assigned to an exact location on the device
    Info: Pin led3[1] not assigned to an exact location on the device
    Info: Pin led3[2] not assigned to an exact location on the device
    Info: Pin led3[3] not assigned to an exact location on the device
    Info: Pin led5[0] not assigned to an exact location on the device
    Info: Pin led5[1] not assigned to an exact location on the device
    Info: Pin led5[2] not assigned to an exact location on the device
    Info: Pin led5[3] not assigned to an exact location on the device
    Info: Pin led6[0] not assigned to an exact location on the device
    Info: Pin led6[1] not assigned to an exact location on the device
    Info: Pin led6[2] not assigned to an exact location on the device
    Info: Pin led6[3] not assigned to an exact location on the device
    Info: Pin led4[0] not assigned to an exact location on the device
    Info: Pin led4[1] not assigned to an exact location on the device
    Info: Pin led4[2] not assigned to an exact location on the device
    Info: Pin led4[3] not assigned to an exact location on the device
Info: Fitter is using the Classic Timing Analyzer
Info: Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time.
Info: Completed User Assigned Global Signals Promotion Operation
Info: DQS I/O pins require 0 global routing resources
Info: Automatically promoted signal "clk" to use Global clock in PIN J4
Info: Completed Auto Global Promotion Operation
Info: Starting register packing
Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option
Info: Finished moving registers into I/O cells, LUTs, and RAM blocks
Info: Finished register packing: elapsed time is 00:00:00
Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement
    Info: Number of I/O pins in group: 21 (unused VREF, 3.30 VCCIO, 21 input, 0 output, 0 bidirectional)
        Info: I/O standards used: 3.3-V LVTTL.
Info: I/O bank details before I/O pin placement
    Info: Statistics of I/O banks
        Info: I/O bank number 1 does not use VREF pins and has 3.30V VCCIO pins. 18 total pin(s) used --  45 pins available
        Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 9 total pin(s) used --  52 pins available
        Info: I/O bank number 3 does not use VREF pins and has unused VCCIO pins. 6 total pin(s) used --  58 pins available
        Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  61 pins available
Info: Fitter placement preparation operations beginning
Info: Fitter placement preparation operations ending: elapsed time is 00:00:00
Info: Fitter placement operations beginning
Info: Fitter placement was successful
Info: Fitter placement operations ending: elapsed time is 00:00:00
Info: Estimated most critical path is register to register delay of 0.924 ns
    Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X26_Y18; Fanout = 19; REG Node = 'count[1]'
    Info: 2: + IC(0.615 ns) + CELL(0.309 ns) = 0.924 ns; Loc. = LAB_X26_Y18; Fanout = 19; REG Node = 'count[1]'
    Info: Total cell delay = 0.309 ns ( 33.44 % )
    Info: Total interconnect delay = 0.615 ns ( 66.56 % )
Info: Fitter routing operations beginning
Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 3%
    Info: The peak interconnect region extends from location X21_Y14 to location X31_Y27
Info: Fitter routing operations ending: elapsed time is 00:00:00
Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time.
    Info: Optimizations that may affect the design's routability were skipped
    Info: Optimizations that may affect the design's timing were skipped
Info: Completed Fixed Delay Chain Operation
Info: Started post-fitting delay annotation
Info: Delay annotation completed successfully
Info: Completed Auto Delay Chain Operation
Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'.
Info: Quartus II Fitter was successful. 0 errors, 2 warnings
    Info: Allocated 181 megabytes of memory during processing
    Info: Processing ended: Fri Nov 14 15:59:36 2008
    Info: Elapsed time: 00:00:08