/* *      linux/arch/alpha/kernel/irq_i8259.c * * This is the 'legacy' 8259A Programmable Interrupt Controller, * present in the majority of PC/AT boxes. * * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c. */#include <linux/config.h>#include <linux/init.h>#include <linux/cache.h>#include <linux/sched.h>#include <linux/irq.h>#include <linux/interrupt.h>#include <asm/io.h>#include "proto.h"#include "irq_impl.h"/* Note mask bit is true for DISABLED irqs.  */static unsigned int cached_irq_mask = 0xffff;spinlock_t i8259_irq_lock = SPIN_LOCK_UNLOCKED;static inline voidi8259_update_irq_hw(unsigned int irq, unsigned long mask){	int port = 0x21;	if (irq & 8) mask >>= 8;	if (irq & 8) port = 0xA1;	outb(mask, port);}inline voidi8259a_enable_irq(unsigned int irq){	spin_lock(&i8259_irq_lock);	i8259_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));	spin_unlock(&i8259_irq_lock);}static inline void__i8259a_disable_irq(unsigned int irq){	i8259_update_irq_hw(irq, cached_irq_mask |= 1 << irq);}voidi8259a_disable_irq(unsigned int irq){	spin_lock(&i8259_irq_lock);	__i8259a_disable_irq(irq);	spin_unlock(&i8259_irq_lock);}voidi8259a_mask_and_ack_irq(unsigned int irq){	spin_lock(&i8259_irq_lock);	__i8259a_disable_irq(irq);	/* Ack the interrupt making it the lowest priority.  */	if (irq >= 8) {		outb(0xE0 | (irq - 8), 0xa0);   /* ack the slave */		irq = 2;	}	outb(0xE0 | irq, 0x20);			/* ack the master */	spin_unlock(&i8259_irq_lock);}unsigned inti8259a_startup_irq(unsigned int irq){	i8259a_enable_irq(irq);	return 0; /* never anything pending */}voidi8259a_end_irq(unsigned int irq){	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))		i8259a_enable_irq(irq);}struct hw_interrupt_type i8259a_irq_type = {	typename:	"XT-PIC",	startup:	i8259a_startup_irq,	shutdown:	i8259a_disable_irq,	enable:		i8259a_enable_irq,	disable:	i8259a_disable_irq,	ack:		i8259a_mask_and_ack_irq,	end:		i8259a_end_irq,};void __initinit_i8259a_irqs(void){	static struct irqaction cascade = {		handler:	no_action,		name:		"cascade",	};	long i;	outb(0xff, 0x21);	/* mask all of 8259A-1 */	outb(0xff, 0xA1);	/* mask all of 8259A-2 */	for (i = 0; i < 16; i++) {		irq_desc[i].status = IRQ_DISABLED;		irq_desc[i].handler = &i8259a_irq_type;	}	setup_irq(2, &cascade);}#if defined(CONFIG_ALPHA_GENERIC)# define IACK_SC	alpha_mv.iack_sc#elif defined(CONFIG_ALPHA_APECS)# define IACK_SC	APECS_IACK_SC#elif defined(CONFIG_ALPHA_LCA)# define IACK_SC	LCA_IACK_SC#elif defined(CONFIG_ALPHA_CIA)# define IACK_SC	CIA_IACK_SC#elif defined(CONFIG_ALPHA_PYXIS)# define IACK_SC	PYXIS_IACK_SC#elif defined(CONFIG_ALPHA_TITAN)# define IACK_SC	TITAN_IACK_SC#elif defined(CONFIG_ALPHA_TSUNAMI)# define IACK_SC	TSUNAMI_IACK_SC#elif defined(CONFIG_ALPHA_POLARIS)# define IACK_SC	POLARIS_IACK_SC#elif defined(CONFIG_ALPHA_IRONGATE)# define IACK_SC        IRONGATE_IACK_SC#endif#if defined(IACK_SC)voidisa_device_interrupt(unsigned long vector, struct pt_regs *regs){	/*	 * Generate a PCI interrupt acknowledge cycle.  The PIC will	 * respond with the interrupt vector of the highest priority	 * interrupt that is pending.  The PALcode sets up the	 * interrupts vectors such that irq level L generates vector L.	 */	int j = *(vuip) IACK_SC;	j &= 0xff;	handle_irq(j, regs);}#endif#if defined(CONFIG_ALPHA_GENERIC) || !defined(IACK_SC)voidisa_no_iack_sc_device_interrupt(unsigned long vector, struct pt_regs *regs){	unsigned long pic;	/*	 * It seems to me that the probability of two or more *device*	 * interrupts occurring at almost exactly the same time is	 * pretty low.  So why pay the price of checking for	 * additional interrupts here if the common case can be	 * handled so much easier?	 */	/* 	 *  The first read of gives you *all* interrupting lines.	 *  Therefore, read the mask register and and out those lines	 *  not enabled.  Note that some documentation has 21 and a1 	 *  write only.  This is not true.	 */	pic = inb(0x20) | (inb(0xA0) << 8);	/* read isr */	pic &= 0xFFFB;				/* mask out cascade & hibits */	while (pic) {		int j = ffz(~pic);		pic &= pic - 1;		handle_irq(j, regs);	}}#endif