/*  RTC_TOGGLEFIFO     uses real time clock to generate an interrupt and    toggles parallel port on each irq    and puts timing information into fifo    Originally by Michael "FZ" Baraban(c) 1997, Released under the GPL.    Modified by Victor Yodaiken (c) 1998, Released under the GPL.    Modified by Victor Yodaiken (c) 1999, Released under the GPL.    */#include <linux/module.h>#include <linux/kernel.h>#include <asm/ptrace.h>#include <linux/rtl.h>#include <asm/io.h>#include <linux/cons.h>#include <rtl_sync.h>#include <rtl_fifo.h>#include "common.h"static int output = 0xffff;#include <linux/mc146818rtc.h>char save_cmos_A;char save_cmos_B;void shutdown(void);static int shutdown_flag = 0;int samp = 0;unsigned int  handler(unsigned int irq_number, struct pt_regs *p) {	/* Do not	rt_task_wait() in a handler */	switch(shutdown_flag){		case 0:			outb(output, LPT_PORT);			/* I'm too lazy to figure out which pin is which			   so just toggle all of them */			output = ~output;			(void) CMOS_READ(RTC_REG_C);  /* clear IRQ */ 		rtf_put(0, &samp, sizeof(samp));		samp++;			break;		case 1: 			shutdown_flag = 2;		default: /* do nothing */	}	return 0;}int init_module(void){	unsigned char ctemp;	int old_irq_state;	int debug;        printk("Starting parallel port module\n");	rtl_no_interrupts(old_irq_state);	debug = rtl_request_global_irq(8, handler);	printk("Requested 8 and got %d\n",debug);	/* program the RTC to interrupt at 8192 Hz */	save_cmos_A = CMOS_READ(RTC_REG_A);	save_cmos_B = CMOS_READ(RTC_REG_B);	CMOS_WRITE(0x23, RTC_REG_A);  	/* 32kHz Time Base, 8192 Hz interrupt frequency */	ctemp = CMOS_READ(RTC_REG_B);	ctemp &= 0x8f;                	/* Clear */	ctemp |= 0x40;                	/* Periodic interrupt enable */	CMOS_WRITE(ctemp, RTC_REG_B); 	(void) CMOS_READ(RTC_REG_C);	rtl_restore_interrupts(old_irq_state);	printk("create returns %x\n",rtf_create(0, 4000));	return 0;}void shutdown(){	int old_irq_state;	rtl_no_interrupts(old_irq_state);	CMOS_WRITE(save_cmos_A, RTC_REG_A);	CMOS_WRITE(save_cmos_B, RTC_REG_B);	rtl_free_global_irq(8);	rtl_restore_interrupts(old_irq_state);	rtf_destroy(0);}void cleanup_module(void){	int timeout = 100000;	shutdown_flag = 1;	while((shutdown_flag==1) && timeout--);	/* so it's kinda sloppy, wait for timeout or for 	   interrupt routine to ack shutdown, whatever comes	   first */	shutdown();}