?? altsyncram_4pi2.tdf
字號:
--altsyncram ADDRESS_ACLR_A="NONE" ADDRESS_ACLR_B="NONE" ADDRESS_REG_B="CLOCK1" BYTE_SIZE=8 CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" CLOCK_ENABLE_INPUT_A="NORMAL" CLOCK_ENABLE_OUTPUT_A="NORMAL" CYCLONEII_M4K_COMPATIBILITY="ON" DEVICE_FAMILY="Cyclone" ENABLE_RUNTIME_MOD="NO" INDATA_ACLR_B="NONE" INDATA_REG_B="CLOCK1" INIT_FILE="cos.mif" INIT_FILE_LAYOUT="PORT_A" LOW_POWER_MODE="AUTO" MAXIMUM_DEPTH=0 NUMWORDS_A=4096 NUMWORDS_B=4096 OPERATION_MODE="BIDIR_DUAL_PORT" OUTDATA_ACLR_A="NONE" OUTDATA_ACLR_B="NONE" OUTDATA_REG_A="CLOCK0" OUTDATA_REG_B="UNREGISTERED" RAM_BLOCK_TYPE="AUTO" RDCONTROL_REG_B="CLOCK1" READ_DURING_WRITE_MODE_MIXED_PORTS="DONT_CARE" WIDTH_A=12 WIDTH_B=12 WIDTH_BYTEENA_A=1 WIDTHAD_A=12 WIDTHAD_B=12 WRCONTROL_ACLR_A="NONE" WRCONTROL_ACLR_B="NONE" WRCONTROL_WRADDRESS_REG_B="CLOCK1" address_a address_b clock0 clock1 data_b q_a q_b wren_b CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
--VERSION_BEGIN 6.0 cbx_altsyncram 2006:03:30:14:59:04:SJ cbx_cycloneii 2006:02:07:15:19:20:SJ cbx_lpm_add_sub 2006:01:09:11:17:20:SJ cbx_lpm_compare 2006:01:09:11:15:40:SJ cbx_lpm_decode 2006:01:09:11:16:44:SJ cbx_lpm_mux 2006:01:09:11:16:16:SJ cbx_mgl 2006:04:14:11:14:36:SJ cbx_stratix 2006:02:07:15:17:04:SJ cbx_stratixii 2006:03:03:09:35:36:SJ cbx_util_mgl 2006:01:09:10:46:36:SJ VERSION_END
-- Copyright (C) 1991-2006 Altera Corporation
-- Your use of Altera Corporation's design tools, logic functions
-- and other software and tools, and its AMPP partner logic
-- functions, and any output files any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Altera Program License
-- Subscription Agreement, Altera MegaCore Function License
-- Agreement, or other applicable license agreement, including,
-- without limitation, that your use is for the sole purpose of
-- programming logic devices manufactured by Altera and sold by
-- Altera or its authorized distributors. Please refer to the
-- applicable agreement for further details.
PARAMETERS
(
PORT_A_ADDRESS_WIDTH = 1,
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
PORT_A_DATA_WIDTH = 1,
PORT_B_ADDRESS_WIDTH = 1,
PORT_B_BYTE_ENABLE_MASK_WIDTH = 1,
PORT_B_DATA_WIDTH = 1
);
FUNCTION cyclone_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbrewe)
WITH ( CONNECTIVITY_CHECKING, DATA_INTERLEAVE_OFFSET_IN_BITS, DATA_INTERLEAVE_WIDTH_IN_BITS, DONT_POWER_OPTIMIZE, INIT_FILE, INIT_FILE_LAYOUT, LOGICAL_RAM_NAME, mem_init0, mem_init1, MIXED_PORT_FEED_THROUGH_MODE, OPERATION_MODE, PORT_A_ADDRESS_CLEAR, PORT_A_ADDRESS_WIDTH, PORT_A_BYTE_ENABLE_CLEAR, PORT_A_BYTE_ENABLE_MASK_WIDTH, PORT_A_DATA_IN_CLEAR, PORT_A_DATA_OUT_CLEAR, PORT_A_DATA_OUT_CLOCK, PORT_A_DATA_WIDTH, PORT_A_FIRST_ADDRESS, PORT_A_FIRST_BIT_NUMBER, PORT_A_LAST_ADDRESS, PORT_A_LOGICAL_RAM_DEPTH, PORT_A_LOGICAL_RAM_WIDTH, PORT_A_WRITE_ENABLE_CLEAR, PORT_B_ADDRESS_CLEAR, PORT_B_ADDRESS_CLOCK, PORT_B_ADDRESS_WIDTH, PORT_B_BYTE_ENABLE_CLEAR, PORT_B_BYTE_ENABLE_CLOCK, PORT_B_BYTE_ENABLE_MASK_WIDTH, PORT_B_DATA_IN_CLEAR, PORT_B_DATA_IN_CLOCK, PORT_B_DATA_OUT_CLEAR, PORT_B_DATA_OUT_CLOCK, PORT_B_DATA_WIDTH, PORT_B_FIRST_ADDRESS, PORT_B_FIRST_BIT_NUMBER, PORT_B_LAST_ADDRESS, PORT_B_LOGICAL_RAM_DEPTH, PORT_B_LOGICAL_RAM_WIDTH, PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR, PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK, POWER_UP_UNINITIALIZED, RAM_BLOCK_TYPE)
RETURNS ( portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);
--synthesis_resources = M4K 192
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";
SUBDESIGN altsyncram_4pi2
(
address_a[11..0] : input;
address_b[11..0] : input;
clock0 : input;
clock1 : input;
data_b[11..0] : input;
q_a[11..0] : output;
q_b[11..0] : output;
wren_b : input;
)
VARIABLE
ram_block3a0 : cyclone_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "cos.mif",
INIT_FILE_LAYOUT = "port_a",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_CLEAR = "none",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_OUT_CLEAR = "none",
PORT_A_DATA_OUT_CLOCK = "clock0",
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 0,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 12,
PORT_A_WRITE_ENABLE_CLEAR = "none",
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_IN_CLEAR = "none",
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 0,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 12,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
RAM_BLOCK_TYPE = "auto"
);
ram_block3a1 : cyclone_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "cos.mif",
INIT_FILE_LAYOUT = "port_a",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_CLEAR = "none",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_OUT_CLEAR = "none",
PORT_A_DATA_OUT_CLOCK = "clock0",
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 1,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 12,
PORT_A_WRITE_ENABLE_CLEAR = "none",
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_IN_CLEAR = "none",
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 1,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 12,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
RAM_BLOCK_TYPE = "auto"
);
ram_block3a2 : cyclone_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "cos.mif",
INIT_FILE_LAYOUT = "port_a",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_CLEAR = "none",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_OUT_CLEAR = "none",
PORT_A_DATA_OUT_CLOCK = "clock0",
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 2,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 12,
PORT_A_WRITE_ENABLE_CLEAR = "none",
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_IN_CLEAR = "none",
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 2,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 12,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
RAM_BLOCK_TYPE = "auto"
);
ram_block3a3 : cyclone_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "cos.mif",
INIT_FILE_LAYOUT = "port_a",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_CLEAR = "none",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_OUT_CLEAR = "none",
PORT_A_DATA_OUT_CLOCK = "clock0",
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 3,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 12,
PORT_A_WRITE_ENABLE_CLEAR = "none",
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_IN_CLEAR = "none",
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 3,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 12,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
RAM_BLOCK_TYPE = "auto"
);
ram_block3a4 : cyclone_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "cos.mif",
INIT_FILE_LAYOUT = "port_a",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_CLEAR = "none",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_OUT_CLEAR = "none",
PORT_A_DATA_OUT_CLOCK = "clock0",
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 4,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 12,
PORT_A_WRITE_ENABLE_CLEAR = "none",
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_IN_CLEAR = "none",
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 4,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 12,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
RAM_BLOCK_TYPE = "auto"
);
ram_block3a5 : cyclone_ram_block
WITH (
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "cos.mif",
INIT_FILE_LAYOUT = "port_a",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
OPERATION_MODE = "bidir_dual_port",
PORT_A_ADDRESS_CLEAR = "none",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_OUT_CLEAR = "none",
PORT_A_DATA_OUT_CLOCK = "clock0",
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 5,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 12,
PORT_A_WRITE_ENABLE_CLEAR = "none",
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock1",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_IN_CLEAR = "none",
PORT_B_DATA_IN_CLOCK = "clock1",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 5,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 12,
PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
RAM_BLOCK_TYPE = "auto"
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -