## Example configuration file for setting up a ppp server#   using a null-modem serial cable:##   Tested using ppp on OpenBSD 2.9#     - just follow instructions in man page for accepting#       ppp connections over the serial port#     - if pap and/or chap is enabled, you must have a ppp.secret#       file which will be used for user authentication#     - found useful to turn on syslog for ppp#default: set log Phase Chat LQM LCP IPCP CCP command set device /dev/cua00 set speed 57600 set ctsrts on set dial ""openbsd-server: set timeout 0 set ifaddr 192.168.2.100 192.168.2.123 enable dns allow users enable chap enable pap