/****************************************************************************** * * Name:	skdebug.h * Project:	GEnesis, PCI Gigabit Ethernet Adapter * Version:	$Revision: 1.12 $ * Date:	$Date: 2002/07/15 15:37:13 $ * Purpose:	SK specific DEBUG support * ******************************************************************************//****************************************************************************** * *	(C)Copyright 1998-2002 SysKonnect GmbH. * *	This program is free software; you can redistribute it and/or modify *	it under the terms of the GNU General Public License as published by *	the Free Software Foundation; either version 2 of the License, or *	(at your option) any later version. * *	The information in this file is provided "AS IS" without warranty. * ******************************************************************************//****************************************************************************** * * History: *	$Log: skdebug.h,v $ *	Revision 1.12  2002/07/15 15:37:13  rschmidt *	Power Management support *	Editorial changes * *	Revision 1.11  2002/04/25 11:04:39  rschmidt *	Editorial changes * *	Revision 1.10  1999/11/22 13:47:40  cgoos *	Changed license header to GPL. * *	Revision 1.9  1999/09/14 14:02:43  rwahl *	Added SK_DBGMOD_PECP. * *	Revision 1.8  1998/11/25 08:31:54  gklug *	fix: no C++ comments allowed in common sources * *	Revision 1.7  1998/11/24 16:47:24  swolf *	Driver may now define its own SK_DBG_MSG() (eg. in "h/skdrv1st.h"). * *	Revision 1.6  1998/10/28 10:23:55  rassmann *	ADDED SK_DBGMOD_ADDR. * *	Revision 1.5  1998/10/22 09:43:55  gklug *	add: CSUM module * *	Revision 1.4  1998/10/01 07:54:44  gklug *	add: PNMI debug module * *	Revision 1.3  1998/09/18 08:32:34  afischer *	Macros changed according ssr-spec.: *		SK_DBG_MODCHK -> SK_DBG_CHKMOD *		SK_DBG_CATCHK -> SK_DBG_CHKCAT * *	Revision 1.2  1998/07/03 14:38:25  malthoff *	Add category SK_DBGCAT_FATAL. * *	Revision 1.1  1998/06/19 13:39:01  malthoff *	created. * * ******************************************************************************/#ifndef __INC_SKDEBUG_H#define __INC_SKDEBUG_H#ifdef	DEBUG#ifndef SK_DBG_MSG#define SK_DBG_MSG(pAC,comp,cat,arg) \		if ( ((comp) & SK_DBG_CHKMOD(pAC)) && 	\		      ((cat) & SK_DBG_CHKCAT(pAC)) ) { 	\			SK_DBG_PRINTF arg ;		\		}#endif#else#define SK_DBG_MSG(pAC,comp,lev,arg)#endif/* PLS NOTE: * ========= * Due to any restrictions of kernel printf routines do not use other * format identifiers as: %x %d %c %s . * Never use any combined format identifiers such as: %lx %ld in your * printf - argument (arg) because some OS specific kernel printfs may * only support some basic identifiers. *//* Debug modules */#define SK_DBGMOD_MERR	0x00000001L	/* general module error indication */#define SK_DBGMOD_HWM	0x00000002L	/* Hardware init module */#define SK_DBGMOD_RLMT	0x00000004L	/* RLMT module */#define SK_DBGMOD_VPD	0x00000008L	/* VPD module */#define SK_DBGMOD_I2C	0x00000010L	/* I2C module */#define SK_DBGMOD_PNMI	0x00000020L	/* PNMI module */#define SK_DBGMOD_CSUM	0x00000040L	/* CSUM module */#define SK_DBGMOD_ADDR	0x00000080L	/* ADDR module */#define SK_DBGMOD_PECP	0x00000100L	/* PECP module */#define SK_DBGMOD_POWM	0x00000200L	/* Power Management module *//* Debug events */#define SK_DBGCAT_INIT	0x00000001L	/* module/driver initialization */#define SK_DBGCAT_CTRL	0x00000002L	/* controlling devices */#define SK_DBGCAT_ERR	0x00000004L	/* error handling paths */#define SK_DBGCAT_TX	0x00000008L	/* transmit path */#define SK_DBGCAT_RX	0x00000010L	/* receive path */#define SK_DBGCAT_IRQ	0x00000020L	/* general IRQ handling */#define SK_DBGCAT_QUEUE	0x00000040L	/* any queue management */#define SK_DBGCAT_DUMP	0x00000080L	/* large data output e.g. hex dump */#define SK_DBGCAT_FATAL	0x00000100L	/* fatal error */#endif	/* __INC_SKDEBUG_H */