?? os_cpu_a.c
字號:
#define OS_CPU_GLOBALS
#include "includes.h"
#include "os_data51.h"
/*
;********************************************************************************************************
; uC/OS-II
; The Real-Time Kernel
;
; (c) Copyright 1992-1998, Jean J. Labrosse, Plantation, FL
; All Rights Reserved
;
;
; 80x86/80x88 Specific code
; LARGE MEMORY MODEL
;
; IBM/PC Compatible Target
;
; File : OS_CPU_A.ASM
; By : Jean J. Labrosse
;********************************************************************************************************
PUBLIC _OSTickISR
PUBLIC _OSStartHighRdy
PUBLIC _OSCtxSw
PUBLIC _OSIntCtxSw
EXTRN _OSIntExit:FAR
EXTRN _OSTimeTick:FAR
EXTRN _OSTaskSwHook:FAR
EXTRN _OSIntNesting:BYTE
EXTRN _OSTickDOSCtr:BYTE
EXTRN _OSPrioHighRdy:BYTE
EXTRN _OSPrioCur:BYTE
EXTRN _OSRunning:BYTE
EXTRN _OSTCBCur:DWORD
EXTRN _OSTCBHighRdy:DWORD
.MODEL LARGE
.CODE
.186
PAGE ;
;*********************************************************************************************************
; START MULTITASKING
; void OSStartHighRdy(void)
;
; The stack frame is assumed to look as follows:
;
; OSTCBHighRdy->OSTCBStkPtr --> DS (Low memory)
; ES
; DI
; SI
; BP
; SP
; BX
; DX
; CX
; AX
; OFFSET of task code address
; SEGMENT of task code address
; Flags to load in PSW
; OFFSET of task code address
; SEGMENT of task code address
; OFFSET of 'pdata'
; SEGMENT of 'pdata' (High memory)
;
; Note : OSStartHighRdy() MUST:
; a) Call OSTaskSwHook() then,
; b) Set OSRunning to TRUE,
; c) Switch to the highest priority task.
;*********************************************************************************************************
_OSStartHighRdy PROC FAR
MOV AX, SEG _OSTCBHighRdy ; Reload DS
MOV DS, AX ;
;
CALL FAR PTR _OSTaskSwHook ; Call user defined task switch hook
;
INC BYTE PTR DS:_OSRunning ; Indicate that multitasking has started
;
LES BX, DWORD PTR DS:_OSTCBHighRdy ; SS:SP = OSTCBHighRdy->OSTCBStkPtr
MOV SS, ES:[BX+2] ;
MOV SP, ES:[BX+0] ;
;
POP DS ; Load task's context
POP ES ;
POPA ;
;
IRET ; Run task
_OSStartHighRdy ENDP
PAGE ;
;*********************************************************************************************************
; PERFORM A CONTEXT SWITCH (From task level)
; void OSCtxSw(void)
;
; Note(s): 1) Upon entry,
; OSTCBCur points to the OS_TCB of the task to suspend
; OSTCBHighRdy points to the OS_TCB of the task to resume
;
; 2) The stack frame of the task to suspend looks as follows:
;
; SP -> OFFSET of task to suspend (Low memory)
; SEGMENT of task to suspend
; PSW of task to suspend (High memory)
;
; 3) The stack frame of the task to resume looks as follows:
;
; OSTCBHighRdy->OSTCBStkPtr --> DS (Low memory)
; ES
; DI
; SI
; BP
; SP
; BX
; DX
; CX
; AX
; OFFSET of task code address
; SEGMENT of task code address
; Flags to load in PSW (High memory)
;*********************************************************************************************************
_OSCtxSw PROC FAR
;
PUSHA ; Save current task's context
PUSH ES ;
PUSH DS ;
;
MOV AX, SEG _OSTCBCur ; Reload DS in case it was altered
MOV DS, AX ;
;
LES BX, DWORD PTR DS:_OSTCBCur ; OSTCBCur->OSTCBStkPtr = SS:SP
MOV ES:[BX+2], SS ;
MOV ES:[BX+0], SP ;
;
CALL FAR PTR _OSTaskSwHook ; Call user defined task switch hook
;
MOV AX, WORD PTR DS:_OSTCBHighRdy+2 ; OSTCBCur = OSTCBHighRdy
MOV DX, WORD PTR DS:_OSTCBHighRdy ;
MOV WORD PTR DS:_OSTCBCur+2, AX ;
MOV WORD PTR DS:_OSTCBCur, DX ;
;
MOV AL, BYTE PTR DS:_OSPrioHighRdy ; OSPrioCur = OSPrioHighRdy
MOV BYTE PTR DS:_OSPrioCur, AL ;
;
LES BX, DWORD PTR DS:_OSTCBHighRdy ; SS:SP = OSTCBHighRdy->OSTCBStkPtr
MOV SS, ES:[BX+2] ;
MOV SP, ES:[BX] ;
;
POP DS ; Load new task's context
POP ES ;
POPA ;
;
IRET ; Return to new task
;
_OSCtxSw ENDP
PAGE ;
;*********************************************************************************************************
; PERFORM A CONTEXT SWITCH (From an ISR)
; void OSIntCtxSw(void)
;
; Note(s): 1) Upon entry,
; OSTCBCur points to the OS_TCB of the task to suspend
; OSTCBHighRdy points to the OS_TCB of the task to resume
;
; 2) The stack frame of the task to suspend looks as follows:
;
; SP+0 --> OFFSET of return address of OSIntCtxSw() (Low memory)
; +2 SEGMENT of return address of OSIntCtxSw()
; +4 PSW saved by OS_ENTER_CRITICAL() in OSIntExit()
; +6 OFFSET of return address of OSIntExit()
; +8 SEGMENT of return address of OSIntExit()
; +10 DS
; ES
; DI
; SI
; BP
; SP
; BX
; DX
; CX
; AX
; OFFSET of task code address
; SEGMENT of task code address
; Flags to load in PSW (High memory)
;
; 3) The stack frame of the task to resume looks as follows:
;
; OSTCBHighRdy->OSTCBStkPtr --> DS (Low memory)
; ES
; DI
; SI
; BP
; SP
; BX
; DX
; CX
; AX
; OFFSET of task code address
; SEGMENT of task code address
; Flags to load in PSW (High memory)
;*********************************************************************************************************
_OSIntCtxSw PROC FAR
; ; Ignore calls to OSIntExit and OSIntCtxSw
; ADD SP,8 ; (Uncomment if OS_CRITICAL_METHOD is 1, see OS_CPU.H)
ADD SP,10 ; (Uncomment if OS_CRITICAL_METHOD is 2, see OS_CPU.H)
;
MOV AX, SEG _OSTCBCur ; Reload DS in case it was altered
MOV DS, AX ;
;
LES BX, DWORD PTR DS:_OSTCBCur ; OSTCBCur->OSTCBStkPtr = SS:SP
MOV ES:[BX+2], SS ;
MOV ES:[BX+0], SP ;
;
CALL FAR PTR _OSTaskSwHook ; Call user defined task switch hook
;
MOV AX, WORD PTR DS:_OSTCBHighRdy+2 ; OSTCBCur = OSTCBHighRdy
MOV DX, WORD PTR DS:_OSTCBHighRdy ;
MOV WORD PTR DS:_OSTCBCur+2, AX ;
MOV WORD PTR DS:_OSTCBCur, DX ;
;
MOV AL, BYTE PTR DS:_OSPrioHighRdy ; OSPrioCur = OSPrioHighRdy
MOV BYTE PTR DS:_OSPrioCur, AL
;
LES BX, DWORD PTR DS:_OSTCBHighRdy ; SS:SP = OSTCBHighRdy->OSTCBStkPtr
MOV SS, ES:[BX+2] ;
MOV SP, ES:[BX] ;
;
POP DS ; Load new task's context
POP ES ;
POPA ;
;
IRET ; Return to new task
;
_OSIntCtxSw ENDP
PAGE ;
;*********************************************************************************************************
; HANDLE TICK ISR
;
; Description: This function is called 199.99 times per second or, 11 times faster than the normal DOS
; tick rate of 18.20648 Hz. Thus every 11th time, the normal DOS tick handler is called.
; This is called chaining. 10 times out of 11, however, the interrupt controller on the PC
; must be cleared to allow for the next interrupt.
;
; Arguments : none
;
; Returns : none
;
; Note(s) : The following C-like pseudo-code describe the operation being performed in the code below.
;
; Save all registers on the current task's stack;
; OSIntNesting++;
; OSTickDOSCtr--;
; if (OSTickDOSCtr == 0) {
; INT 81H; Chain into DOS every 54.925 mS
; (Interrupt will be cleared by DOS)
; } else {
; Send EOI to PIC; Clear tick interrupt by sending an End-Of-Interrupt to the 8259
; PIC (Priority Interrupt Controller)
; }
; OSTimeTick(); Notify uC/OS-II that a tick has occured
; OSIntExit(); Notify uC/OS-II about end of ISR
; Restore all registers that were save on the current task's stack;
; Return from Interrupt;
;*********************************************************************************************************
;
_OSTickISR PROC FAR
;
PUSHA ; Save interrupted task's context
PUSH ES
PUSH DS
;
MOV AX, SEG _OSTickDOSCtr ; Reload DS
MOV DS, AX
;
INC BYTE PTR _OSIntNesting ; Notify uC/OS-II of ISR
;
DEC BYTE PTR DS:_OSTickDOSCtr
CMP BYTE PTR DS:_OSTickDOSCtr, 0
JNE SHORT _OSTickISR1 ; Every 11 ticks (~199.99 Hz), chain into DOS
;
MOV BYTE PTR DS:_OSTickDOSCtr, 11
INT 081H ; Chain into DOS's tick ISR
JMP SHORT _OSTickISR2
_OSTickISR1:
MOV AL, 20H ; Move EOI code into AL.
MOV DX, 20H ; Address of 8259 PIC in DX.
OUT DX, AL ; Send EOI to PIC if not processing DOS timer.
;
_OSTickISR2:
CALL FAR PTR _OSTimeTick ; Process system tick
;
CALL FAR PTR _OSIntExit ; Notify uC/OS-II of end of ISR
;
POP DS ; Restore interrupted task's context
POP ES
POPA
;
IRET ; Return to interrupted task
;
_OSTickISR ENDP
;
END
*/
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -