?? xreducetestdlg.cpp
字號:
// XReduceTestDlg.cpp : 實現文件
//
#include "stdafx.h"
#include "reduce.h"
#include "XReduceTestDlg.h"
#include <math.h>
// XReduceTestDlg 對話框
IMPLEMENT_DYNAMIC(XReduceTestDlg, CDialog)
XReduceTestDlg::XReduceTestDlg(CWnd* pParent /*=NULL*/)
: CDialog(XReduceTestDlg::IDD, pParent)
, intValNum(0)
, bHaveIgnoreItem(FALSE)
, intProcessState(0)
, csReduceResult(_T(""))
{
}
XReduceTestDlg::~XReduceTestDlg()
{
}
void XReduceTestDlg::DoDataExchange(CDataExchange* pDX)
{
CDialog::DoDataExchange(pDX);
DDX_Check(pDX, IDC_IGNORE, bHaveIgnoreItem);
DDV_MaxChars(pDX, csReduceResult, 255);
}
BEGIN_MESSAGE_MAP(XReduceTestDlg, CDialog)
ON_BN_CLICKED(IDC_BUTTON1, OnBnClickedButton1)
ON_WM_PAINT()
ON_WM_LBUTTONDOWN()
ON_WM_RBUTTONDOWN()
ON_WM_KEYDOWN()
ON_WM_KEYUP()
ON_BN_CLICKED(IDC_BUTTON4, OnBnClickedButton4)
ON_BN_CLICKED(IDC_BUTTON5, OnBnClickedButton5)
ON_BN_CLICKED(IDC_BUTTON6, OnBnClickedButton6)
ON_BN_CLICKED(IDC_BUTTON7, OnBnClickedButton7)
ON_WM_TIMER()
ON_BN_CLICKED(IDC_BUTTON8, OnBnClickedButton8)
ON_BN_CLICKED(IDC_BUTTON11, OnBnClickedButton11)
ON_BN_CLICKED(IDC_BUTTON12, OnBnClickedButton12)
ON_BN_CLICKED(IDC_BUTTON9, OnBnClickedButton9)
ON_BN_CLICKED(IDC_BUTTON13, OnBnClickedButton13)
END_MESSAGE_MAP()
// XReduceTestDlg 消息處理程序
BOOL XReduceTestDlg::OnInitDialog(void)
{
BOOL ret = CDialog::OnInitDialog();
if(!ret) return ret;
//內存分配
tabAutoReducing = new XTabDataManager[1000];
if( tabAutoReducing == NULL ){
AfxMessageBox( "內存不足，本能運行本程序！!" );
this->EndDialog( 0 );
return FALSE;
}
//初始化設置
intValNum = 4;//
bHaveIgnoreItem = false;//沒有無關項
this->CheckRadioButton( IDC_RADIO3,IDC_RADIO5,IDC_RADIO4 );
UpdateData( FALSE );
CWnd * pwnd = this->GetDlgItem( IDC_DRAWRECT );
CPoint pt(30, 20);
pwnd->GetClientRect( &rectDrawArea );
rectDrawArea += pt;
intProcessState = 0;//0-正在設置
timer_on = false;
OnBnClickedButton1();
root.par = &root;
return FALSE;
}
void XReduceTestDlg::OnBnClickedButton1()
{
if( timer_on ) return;
int id = this->GetCheckedRadioButton( IDC_RADIO3,IDC_RADIO5 );
switch(id){
case IDC_RADIO3: intValNum = 3; break;
case IDC_RADIO5: intValNum = 5; break;
case IDC_RADIO4: intValNum = 4;
}
UpdateData( TRUE );
intProcessState = 1;//正在填充卡諾圖
for( int i = 0; i < 16; i++ )
intTabValue[i] = 0;
//重新繪制卡諾圖框
this->InvalidateRect( NULL );
}
//根據變量個數畫框
void XReduceTestDlg::DrawBlockTitle( CDC *dc )
{
CRect rectBlock = rectDrawArea;
CPoint pt1,pt2;
rectBlock.DeflateRect( 40,40,0,0 );
dc->DrawEdge( &rectDrawArea ,BDR_RAISEDINNER | BDR_RAISEDOUTER,BF_RECT );
dc->DrawEdge( &rectBlock ,BDR_SUNKENINNER | BDR_SUNKENOUTER,BF_RECT );
pt1 = rectBlock.TopLeft();
pt2 = rectDrawArea.TopLeft(); pt2.x += 2; pt2.y += 2 ;
dc->MoveTo( pt2 ); dc->LineTo( pt1 );
//寫字
CString xitem[2] = { "BC","CD" };
CString yitem[2] = { "A","AB" };
CString xtitle[4] ={ "00","01","11","10" } ;
CString ytitle[2][4] ={ {"0","1"},{"00","01","11","10"} };
CRect rectTitle;
//豎立格
pt1 = rectBlock.TopLeft();
pt2.x = rectBlock.left ; pt2.y = rectBlock.bottom ;
int dw = rectBlock.Width() / 4;
//CString xitem[2] = { "BC","CD" };
//CString yitem[2] = { "A","AB" };
dc->SetTextColor( RGB(0,0,255) );
dc->TextOut( pt1.x, pt1.y-30, xitem[intValNum-3] );
for( int i = 0; i < 4; i++ ){
rectTitle.left = pt1.x;
rectTitle.right = pt1.x + dw;
rectTitle.top = pt1.y - 20;
rectTitle.bottom = pt1.y;
dc->DrawText( xtitle[i], &rectTitle, DT_CENTER|DT_VCENTER );
dc->MoveTo( pt1 ); dc->LineTo( pt2 );
pt1.x += dw; pt2.x += dw;
}
//橫格 intValNum = 4;
int lnum = (intValNum - 2)*2;
pt1 = rectBlock.TopLeft();
pt2.x = rectBlock.right ; pt2.y = rectBlock.top ;
int dh = rectBlock.Height() / lnum;
dc->TextOut( pt1.x-30, pt1.y, yitem[intValNum-3] );
for( int i = 0; i < lnum; i++ ){
rectTitle.left = pt1.x - 20;
rectTitle.right = pt1.x;
rectTitle.top = pt1.y;
rectTitle.bottom = pt1.y + dh;
dc->DrawText( ytitle[intValNum-3][i], &rectTitle, DT_CENTER|DT_VCENTER|DT_SINGLELINE );
dc->MoveTo( pt1 ); dc->LineTo( pt2 );
pt1.y += dh; pt2.y += dh;
}
//在表格中填固定顯示值
int tabVal[][4] = { {0,1,3,2},{4,5,7,6},{12,13,15,14},{8,9,11,10} };
CString str;
CPoint pt3,pt4;
dc->SetBkMode( TRANSPARENT );
pt1 = rectBlock.TopLeft(); pt1.x += 5; pt1.y += 5;
for( int i = 0; i < 4; i++ ){
pt3.x = pt1.x + i*dw;
for( int j = 0; j < lnum; j++ ){
pt3.y = pt1.y + j*dh;
pt4 = pt3; pt4.x++; pt4.y++;
str.Format( _T("%d"),tabVal[j][i] );
dc->SetTextColor( RGB(255,255,255) );
dc->TextOut( pt4.x,pt4.y,str );
dc->SetTextColor( RGB(132,130,132) );
dc->TextOut( pt3.x,pt3.y,str );
}
}
//寫字
//CString xtitle[] ={ "00","01","11","10" } ;
//CString ytitle[] ={ {"00","01","11","10"},{"0","1"} };
//CRect rectTitle = rectBlock;
//CBrush b( RGB(255,255,255) );
//dc->SetBkMode( TRANSPARENT );
//rectTitle.right -= 2;
//rectTitle.bottom = rectBlock.top;
//rectTitle.top = rectBlock.top - 18;
//dc->SetTextColor( RGB(0,128,255) );
//dc->FillRect( &rectTitle , &b );
//dc->DrawText( xtitle,&rectTitle,DT_SINGLELINE|DT_BOTTOM );
//rectTitle = rectBlock;
//rectTitle.bottom -= 2;
//rectTitle.right = rectBlock.left;
//rectTitle.left = rectBlock.left - 18;
//dc->FillRect( &rectTitle , &b );
//dc->DrawText( ytitle[4-intValNum],&rectTitle,DT_WORDBREAK|DT_RIGHT );
}
void XReduceTestDlg::OnPaint(void)
{
CPaintDC dc(this);
DrawBlockTitle( &dc );
DrawTabData( &dc );
if( (intProcessState == 2) || (intProcessState == 3) )
DrawSelfReduingTab( &dc );
else if( (intProcessState == 4) || (intProcessState == 5) || (intProcessState == 10) )
DrawSelfReduingProcess( &dc );
}
// 顯示表格中的數值
void XReduceTestDlg::DrawTabData( CDC *dc )
{
//若變量還未確定,則不顯示具體數值,此時顯示沒有意義
if( intProcessState <= 0 ) return;
CRect rectBlock = rectDrawArea;
CPoint pt1,pt3;
rectBlock.DeflateRect( 40,40,0,0 );
int dw = rectBlock.Width() / 4;
int lnum = (intValNum - 2)*2;
int dh = rectBlock.Height() / lnum;
CString val[3] = { "0","1","X" };
int tabVal[][4] = { {0,1,3,2},{4,5,7,6},{12,13,15,14},{8,9,11,10} };
dc->SetBkMode( TRANSPARENT );
pt1 = rectBlock.TopLeft(); pt1.x += (dw/2-3); pt1.y += (dh/2-3);
for( int i = 0; i < 4; i++ ){
pt3.x = pt1.x + i*dw;
for( int j = 0; j < lnum; j++ ){
pt3.y = pt1.y + j*dh;
switch( intTabValue[ tabVal[j][i] ] ){
case 0: dc->SetTextColor( RGB(132,130,132) ); break;
case 1: dc->SetTextColor( RGB(0,0,255) ); break;
case 2: dc->SetTextColor( RGB(0,255,255) ); break;
}
dc->TextOut( pt3.x,pt3.y,val[ intTabValue[ tabVal[j][i] ] ] );
}
}
}
//在化簡時，結束本次化簡
void XReduceTestDlg::OnRButtonDown( UINT ,CPoint )
{
if( 2 != intProcessState ) return;
tabSelfReducing.FinishThisLine();
InvalidateRect( NULL );
}
void XReduceTestDlg::OnLButtonDown( UINT nFlags,CPoint point )
{
CRect blk;
int order;
if( intProcessState <= 0 ) return;
//正在添表時
else if( 1 == intProcessState ){
//檢測鼠標位置
order = PointInWhichTab( point,blk );
//落在區域內
if( -1 == order ) return;
//改變該值
ChangeTabVal( order );
//刷新顯示該區域
InvalidateRect( &blk );
}
else if( 2 == intProcessState ){
order = PointInWhichTab( point,blk );
//落在區域內
if( -1 == order ) return;
if( 0 == intTabValue[order] ){
MessageBox( "該項不能選擇!" );
return;
}
//加入當前化簡隊列
tabSelfReducing.ChangeThisLine( order );
//刷新顯示該區域
InvalidateRect( &blk );
//InvalidateRect( NULL );
}
}
// 檢測鼠標的位置
int XReduceTestDlg::PointInWhichTab( CPoint poi , CRect & rect )
{
CRect rectBlock = rectDrawArea;
rectBlock.DeflateRect( 40,40,0,0 );
int dw = rectBlock.Width() / 4;
int lnum = (intValNum - 2)*2;
int dh = rectBlock.Height() / lnum;
int tabVal[][4] = { {0,1,3,2},{4,5,7,6},{12,13,15,14},{8,9,11,10} };
CRect tabBlock0, tabBlock;
CPoint pt;
tabBlock0 = rectBlock;
tabBlock0.right = tabBlock0.left + dw;
tabBlock0.bottom = tabBlock0.top + dh;
for( int i = 0; i < 4; i++ ){
for( int j = 0; j < lnum; j++ ){
tabBlock = tabBlock0;
pt.x = dw*i; pt.y = dh*j;
tabBlock += pt;
if( tabBlock.PtInRect(poi) ){
rect = tabBlock;
return tabVal[j][i];
}
}
}
return -1;
}
void XReduceTestDlg::ChangeTabVal( int order )
{
if( order<0 || order>=16 ) return;
intTabValue[order]++;
if( bHaveIgnoreItem ){
if( intTabValue[order] > 2 )
intTabValue[order] = 0;
}
else{
if( intTabValue[order] > 1 )
intTabValue[order] = 0;
}
}
//表格中值確定,開始化簡
void XReduceTestDlg::OnBnClickedButton4()
{
//檢查有無"1"
if( timer_on ) return;
bool haveOne = false;
bool num = 0;
for( int i = 0;( (i < 16) && (4 == intValNum) )|| ( (i < 8) && (3 == intValNum ) );i++ ){
if( 1 == intTabValue[i] ){
haveOne = true;
break;
}
}
if( !haveOne ){
MessageBox( "沒有最小項,請重新填寫卡諾圖!" );
return;
}
for( int i = 0;( (i < 16) && (4 == intValNum) )|| ( (i < 8) && (3 == intValNum ) );i++ ){
if( 0 == intTabValue[i] )
num++;
}
if( num == 0 ){
MessageBox( "Very easy,結果是1！" );
return;
}
Invalidate();
intProcessState = 2;
tabSelfReducing.Init();
tabSelfReducing.intVarNum = intValNum;
//卡諾圖確定后，立即自動產生正確答案
AutoReduce();
}
void XReduceTestDlg::AutoReduce()
{
//初始化
root.son = NULL;
//tabAutoReducing = NULL;
autonum = 0;
cur_autonum = 0;
intArrayNum = 0;
//讀出所有最小項
for( int i = 0; i < 16; i++ ){
if( intTabValue[i] == 1 )
intArrayValue[ i ] = true;
else
intArrayValue[ i ] = false;
}
for( int i = 0; i <= 999; i++ ){
tabAutoReducing[i].Init();
tabAutoReducing[i].intVarNum = intValNum;
tabAutoReducing[i].auto_self = true;
}
use_num = 0;
int pos = 0;
int maskbit[4][7] = { {14,13,11,7},{12,10,9,6,5,3},{8,4,2,1},{0} };
//可化簡的項數 3 2 1
int mask_num[] = { 4,6,4,1 };//3項化簡：共有四種屏蔽碼
int mask_itemnum[] = { 8,4,2,1 };
int m_num = intValNum == 3 ? 1 : 0;//與變量數有關,8
int m_idx = m_num;
int j;
int high_ok = false;//盡量更多項化簡
treeAutoReduce * par_node = &root;
treeAutoReduce * cur_node = NULL , * bef_node = NULL;
while( !intArrayValue[pos] ) pos++;
if( pos >= 16 ) return;
HCURSOR CUR = ::LoadCursor( NULL,IDC_WAIT );
HCURSOR oldcur = SetCursor( CUR );
//取intArrayValue第一項值
for( m_idx = m_num; m_idx <= 3; m_idx++ ){//8項，4項，2項
for( j = 0; j < mask_num[m_idx]; j++ ){//使用那一個MASK
if( CanReduce( pos,maskbit[m_idx][j],mask_itemnum[m_idx] ) ){
if( high_ok ){//說明同一級存在多種化簡方法
bef_node = cur_node;
cur_node = new treeAutoReduce;
use_num++;
bef_node->next = cur_node;
cur_node->before = bef_node;
cur_node->par = par_node;
cur_node->son = NULL;
cur_node->next = NULL;
cur_node->value = pos;
cur_node->maskbit = maskbit[m_idx][j];
cur_node->num = mask_itemnum[m_idx];
}
else{
high_ok = true;
cur_node = new treeAutoReduce;
use_num++;
par_node->son = cur_node;
cur_node->par = par_node;
cur_node->before = NULL;
cur_node->son = NULL;
cur_node->next = NULL;
cur_node->value = pos;
cur_node->maskbit = maskbit[m_idx][j];
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -