/******************************************************************************
*                                                                             *
*        **********                                                           *
*       ************                                                          *
*      ***        ***                                                         *
*     ***    ++    ***                                                        *
*     ***   +  +   ***                      CHIPCON                           *
*     ***   +                                                                 *
*     ***   +  +   ***                                                        *
*     ***    ++    ***                                                        *
*      ***        ***                                                         *
*       ************                                                          *
*        **********                                                           *
*                                                                             *
*******************************************************************************

Filename:     RF04EB.h
Target:       cc2510
Author:       KJA
Revised:      20/6-2006
Revision:     1.0

Description:
Commonly used macros and function prototypes for use with RF04EB.
Functions decleared in this header is implemented in RF04Dev.c.

See RF04Dev.c for function description
******************************************************************************/

#ifndef RF04EB_H
#define RF04EB_H

#include "ioCC2510.h"
#include "hal.h"

/******************************************************************************
* Button S1
*
******************************************************************************/
#define BUTTON_PUSH         P0_1
#define BUTTON_PRESSED()    (!BUTTON_PUSH)
#define INIT_BUTTON()       (P0DIR &= ~0x02)

BOOL buttonPushed( void );

/******************************************************************************
* Joystick
*
******************************************************************************/
#define JOYSTICK_PUSH         P0_5
#define JOYSTICK_PRESSED()    JOYSTICK_PUSH
#define INIT_JOYSTICK_PUSH() \
    do {                     \
        P0DIR &= ~0x20;      \
        P0INP |= 0x20;       \
    } while (0)

BOOL joystickPushed( void );

typedef enum {CENTRED, LEFT, RIGHT, UP, DOWN} JOYSTICK_DIRECTION;

#define JOYSTICK              P0_6
#define INIT_JOYSTICK()       IO_DIR_PORT_PIN(0, 6, IO_IN)
#define ADC_INPUT_JOYSTICK    0x06

JOYSTICK_DIRECTION getJoystickDirection( void );

/******************************************************************************
* LED
*
* LED1 = GLED (green)
* LED2 = RLED (red)
* LED3 = YLED (yellow)
* LED4 = BLED (blue)
*
******************************************************************************/
#define LED_OFF 1
#define LED_ON  0


#define LED1          P1_0
#define LED3          P1_3

#define GLED          LED1
#define YLED          LED3

#define INIT_LED1()      do { LED1 = LED_OFF; IO_DIR_PORT_PIN(1, 0, IO_OUT); P1SEL &= ~0x01;} while (0)
#define INIT_LED3()      do { LED3 = LED_OFF; IO_DIR_PORT_PIN(1, 3, IO_OUT); P1SEL &= ~0x08;} while (0)

#define INIT_GLED()      INIT_LED1()
#define INIT_YLED()      INIT_LED3()


#define SET_LED1()  (LED1 = LED_ON)
#define SET_LED3()  (LED3 = LED_ON)

#define SET_GLED()  (GLED = LED_ON)
#define SET_YLED()  (YLED = LED_ON)


#define CLR_LED1()  (LED1 = LED_OFF)
#define CLR_LED3()  (LED3 = LED_OFF)

#define CLR_GLED()  (GLED = LED_OFF)
#define CLR_YLED()  (YLED = LED_OFF)


#define SET_LED_MASK( n )                            \
    do {                                             \
        if ((n) & 0x01) SET_LED1(); else CLR_LED1(); \
        if ((n) & 0x04) SET_LED3(); else CLR_LED3(); \
    } while (0)


/******************************************************************************
* LCD
*
* See lcd.h for lcd fuctions
******************************************************************************/
#define LCD_SDA  P1_2
#define LCD_SCL  P2_0


/******************************************************************************
* UART
*
******************************************************************************/
#define UART_RD          P0_2
#define UART_TD          P0_3


/******************************************************************************
* PWM sound
*
******************************************************************************/
#define SOUND_OUT        P1_2
#define SOUND_IN         P0_0


/******************************************************************************
* Potentiometer
*
******************************************************************************/
#define POT             P0_7
#define INIT_POT()      IO_DIR_PORT_PIN(0, 7, IO_IN);
#define ADC_INPUT_POT   0x07

UINT8 getPotValue( void );

#endif