?? cnt10.fit
字號:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 09/07/2003 14:38:56
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "cnt10"
BEGIN
DEVICE = "EPF10K10LC84-4";
"clk" : INPUT_PIN = 1 ;
"en" : INPUT_PIN = 42 ;
"reset" : INPUT_PIN = 2 ;
"carry1" : OUTPUT_PIN = 16 ;
"q0" : OUTPUT_PIN = 27 ;
"q1" : OUTPUT_PIN = 28 ;
"q2" : OUTPUT_PIN = 30 ;
"q3" : OUTPUT_PIN = 29 ;
"|LPM_ADD_SUB:201|addcore:adder|:171" : LOCATION = LC3_C2 ;
"|LPM_ADD_SUB:201|addcore:adder|:175" : LOCATION = LC1_C1 ;
"|LPM_ADD_SUB:201|addcore:adder|:179" : LOCATION = LC5_C1 ;
"|LPM_ADD_SUB:201|addcore:adder|:187" : LOCATION = LC2_C1 ;
"|LPM_ADD_SUB:201|addcore:adder|:191" : LOCATION = LC4_A4 ;
"|LPM_ADD_SUB:201|addcore:adder|:199" : LOCATION = LC3_A4 ;
"|LPM_ADD_SUB:201|addcore:adder|:203" : LOCATION = LC1_A4 ;
"|LPM_ADD_SUB:201|addcore:adder|:211" : LOCATION = LC8_A11;
"|LPM_ADD_SUB:201|addcore:adder|:219" : LOCATION = LC8_A8 ;
"|LPM_ADD_SUB:201|addcore:adder|:227" : LOCATION = LC1_A12;
"|LPM_ADD_SUB:201|addcore:adder|:235" : LOCATION = LC8_A12;
"|LPM_ADD_SUB:201|addcore:adder|:243" : LOCATION = LC1_A7 ;
"|LPM_ADD_SUB:201|addcore:adder|:251" : LOCATION = LC7_A7 ;
"|LPM_ADD_SUB:201|addcore:adder|:255" : LOCATION = LC7_C3 ;
"|LPM_ADD_SUB:201|addcore:adder|:263" : LOCATION = LC1_C3 ;
"|LPM_ADD_SUB:201|addcore:adder|:267" : LOCATION = LC5_C5 ;
"|LPM_ADD_SUB:201|addcore:adder|:275" : LOCATION = LC2_C5 ;
"|LPM_ADD_SUB:201|addcore:adder|:279" : LOCATION = LC6_C12;
"reset~1" : LOCATION = LC5_C2 ;
":9" : LOCATION = LC5_A11; -- ca
":14" : LOCATION = LC8_C12; -- q1031
":15" : LOCATION = LC2_C7 ; -- q1030
":16" : LOCATION = LC4_C7 ; -- q1029
":17" : LOCATION = LC4_C5 ; -- q1028
":18" : LOCATION = LC3_C5 ; -- q1027
":19" : LOCATION = LC1_C5 ; -- q1026
":20" : LOCATION = LC3_C3 ; -- q1025
":21" : LOCATION = LC5_C3 ; -- q1024
":22" : LOCATION = LC4_C3 ; -- q1023
":23" : LOCATION = LC6_A7 ; -- q1022
":24" : LOCATION = LC4_A7 ; -- q1021
":25" : LOCATION = LC4_A3 ; -- q1020
":26" : LOCATION = LC3_A3 ; -- q1019
":27" : LOCATION = LC8_A7 ; -- q1018
":28" : LOCATION = LC7_A12; -- q1017
":29" : LOCATION = LC4_A12; -- q1016
":30" : LOCATION = LC1_A8 ; -- q1015
":31" : LOCATION = LC6_A8 ; -- q1014
":32" : LOCATION = LC3_A8 ; -- q1013
":33" : LOCATION = LC7_A11; -- q1012
":34" : LOCATION = LC2_A11; -- q1011
":35" : LOCATION = LC8_A4 ; -- q1010
":36" : LOCATION = LC6_A4 ; -- q109
":37" : LOCATION = LC5_A3 ; -- q108
":38" : LOCATION = LC2_A3 ; -- q107
":39" : LOCATION = LC7_C1 ; -- q106
":40" : LOCATION = LC4_C1 ; -- q105
":41" : LOCATION = LC6_C7 ; -- q104
":42" : LOCATION = LC5_C7 ; -- q103
":43" : LOCATION = LC6_C2 ; -- q102
":44" : LOCATION = LC2_C2 ; -- q101
":45" : LOCATION = LC1_C2 ; -- q100
"~131~1" : LOCATION = LC8_C1 ;
"~131~2" : LOCATION = LC2_C12;
"~131~3" : LOCATION = LC2_A7 ;
"~131~4" : LOCATION = LC3_A12;
"~131~5" : LOCATION = LC5_A8 ;
"~131~6" : LOCATION = LC2_A4 ;
"~131~7" : LOCATION = LC3_C12;
"~131~8" : LOCATION = LC4_C12;
"~131~9" : LOCATION = LC5_C12;
"~131~10" : LOCATION = LC1_C12;
":431" : LOCATION = LC7_C12;
":440" : LOCATION = LC7_C7 ;
":449" : LOCATION = LC3_C7 ;
":458" : LOCATION = LC6_C5 ;
":467" : LOCATION = LC8_C5 ;
":476" : LOCATION = LC7_C5 ;
":485" : LOCATION = LC8_C3 ;
":494" : LOCATION = LC6_C3 ;
":503" : LOCATION = LC2_C3 ;
":512" : LOCATION = LC5_A7 ;
":521" : LOCATION = LC3_A7 ;
":530" : LOCATION = LC6_A3 ;
":539" : LOCATION = LC7_A3 ;
":548" : LOCATION = LC5_A12;
":557" : LOCATION = LC6_A12;
":566" : LOCATION = LC2_A12;
":575" : LOCATION = LC7_A8 ;
":584" : LOCATION = LC4_A8 ;
":593" : LOCATION = LC2_A8 ;
":602" : LOCATION = LC3_A11;
":611" : LOCATION = LC4_A11;
":620" : LOCATION = LC7_A4 ;
":629" : LOCATION = LC5_A4 ;
":638" : LOCATION = LC8_A3 ;
":647" : LOCATION = LC1_A3 ;
":656" : LOCATION = LC6_C1 ;
":665" : LOCATION = LC3_C1 ;
":674" : LOCATION = LC1_C7 ;
"~674~1" : LOCATION = LC4_C2 ;
":683" : LOCATION = LC8_C7 ;
":692" : LOCATION = LC8_C2 ;
":701" : LOCATION = LC7_C2 ;
":795" : LOCATION = LC1_A11;
END;
INTERNAL_INFO "cnt10"
BEGIN
DEVICE = EPF10K10LC84-4;
OD4P1 : LORAX = "1:FB4->LC5_A11,->LC8_C12,->LC2_C7,->LC4_C7,->LC4_C5,->LC3_C5,->LC1_C5,->LC3_C3,->LC5_C3,->LC4_C3,->LC6_A7,->LC4_A7,->LC4_A3,->LC3_A3,->LC8_A7,->LC7_A12,->LC4_A12,->LC1_A8,->LC6_A8,->LC3_A8,->LC7_A11,->LC2_A11,->LC8_A4,->LC6_A4,->LC5_A3,->LC2_A3,->LC7_C1,->LC4_C1,->LC6_C7,->LC5_C7,->LC6_C2,->LC2_C2,->LC1_C2|";
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -