//*----------------------------------------------------------------------------
//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
//*----------------------------------------------------------------------------
//* The software is delivered "AS IS" without warranty or condition of any
//* kind, either express, implied or statutory. This includes without
//* limitation any warranty or condition with respect to merchantability or
//* fitness for any particular purpose, or against the infringements of
//* intellectual property rights of others.
//*----------------------------------------------------------------------------
//* File Name           : Cstartup_SAM7.c
//* Object              : Low level initializations written in C for Tools
//* Creation            : 12/Jun/04
//* 1.2   28/Feb/05 JPP : LIB change AT91C_WDTC_WDDIS & PLL
//* 1.3   21/Mar/05 JPP : Change PLL Wait time
//* 1.4   21/Aug/05 JPP : Change MC_FMR Setting
//* 1.5   29/Aug/05 JPP : Change PLL error
//* 1.6   13/oct/05 JPP : Change comment
//*----------------------------------------------------------------------------

// Include the board file description
#include "Board.h"

// The following functions must be write in ARM mode this function called directly
// by exception vector
extern void AT91F_Spurious_handler(void);
extern void AT91F_Default_IRQ_handler(void);
extern void AT91F_Default_FIQ_handler(void);

//*----------------------------------------------------------------------------
//* \fn    AT91F_LowLevelInit
//* \brief This function performs very low level HW initialization
//*        this function can be use a Stack, depending the compilation
//*        optimization mode
//*----------------------------------------------------------------------------
void AT91F_LowLevelInit( void)
{
	int            i;
	AT91PS_PMC     pPMC = AT91C_BASE_PMC;
	//* Set Flash Waite sate
	//  Single Cycle Access at Up to 30 MHz, or 40
		AT91C_BASE_MC->MC_FMR = AT91C_MC_FWS_1FWS ;

	//* Watchdog Disable
		AT91C_BASE_WDTC->WDTC_WDMR= AT91C_WDTC_WDDIS;

	//* Set MCK at 48 054 850
	// 1 Enabling the Main Oscillator:
		// SCK = 1/32768 = 30.51 uSecond
		// Start up time = 8 * 6 / SCK = 56 * 30.51 = 1,46484375 ms
		// mthomas: avoid warning pPMC->PMC_MOR = (( AT91C_CKGR_OSCOUNT & (0x06 <<8) | AT91C_CKGR_MOSCEN ));
		pPMC->PMC_MOR = ( (( AT91C_CKGR_OSCOUNT & (0x06 <<8)) | AT91C_CKGR_MOSCEN ));
		// Wait the startup time
		while(!(pPMC->PMC_SR & AT91C_PMC_MOSCS));
	// 2 Checking the Main Oscillator Frequency (Optional)
	// 3 Setting PLL and divider:
		// - div by 14 Fin = 1.3165 =(18,432 / 14)
		// - Mul 72+1: Fout =	96.1097 =(3,6864 *73)
		// for 96 MHz the erroe is 0.11%
		// Field out NOT USED = 0
		// PLLCOUNT pll startup time estimate at : 0.844 ms
		// PLLCOUNT 28 = 0.000844 /(1/32768)
		pPMC->PMC_PLLR = ((AT91C_CKGR_DIV & 14 ) |
						 (AT91C_CKGR_PLLCOUNT & (28<<8)) |
						 (AT91C_CKGR_MUL & (72<<16)));


		// Wait the startup time
		while(!(pPMC->PMC_SR & AT91C_PMC_LOCK));
		while(!(pPMC->PMC_SR & AT91C_PMC_MCKRDY));
	// 4. Selection of Master Clock and Processor Clock
		// select the PLL clock divided by 2
		pPMC->PMC_MCKR =  AT91C_PMC_PRES_CLK_2 ;
		while(!(pPMC->PMC_SR & AT91C_PMC_MCKRDY));
	
		pPMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK  ;
		while(!(pPMC->PMC_SR & AT91C_PMC_MCKRDY));

	// Set up the default interrupts handler vectors
	AT91C_BASE_AIC->AIC_SVR[0] = (int) AT91F_Default_FIQ_handler ;
	for (i=1;i < 31; i++)
	{
		AT91C_BASE_AIC->AIC_SVR[i] = (int) AT91F_Default_IRQ_handler ;
	}
	AT91C_BASE_AIC->AIC_SPU  = (int) AT91F_Spurious_handler ;

}