FOR k = 0 TO 2;
b = 0;
IF ((i & (1 << k)) != 0) THEN b = 1;
A34[j + k + 7] = b;
A35[j + k + 7] = b;
A36[j + k + 7] = b;
A37[j + k + 7] = b;
NEXT k;
NEXT i;
FOR i = 0 TO 6;
j = 10 * i;
A38[(j + 9)..j] = $02A;
FOR k = 0 TO 2;
b = 0;
IF ((i & (1 << k)) != 0) THEN b = 1;
A38[j + k + 7] = b;
NEXT k;
NEXT i;
FOR i = 0 TO V1;
A52[i] = 0;
IF (((A13[i] & 256) == 0) ||
((A13[i] & 4) == 0)) THEN GOTO L19;
V2 = A12[i];
A52[i] =
A5[V2] - (80 * A6[V2]);
L19:
NEXT i;
CALL L30;
IRSTOP IRPAUSE;
DRSTOP IDLE;
STATE IDLE;
IF (V101) THEN CALL L32;
IF (V42 != 0) THEN GOTO L20;
A18[9..0] = $071;
V4 = 1 | 2;
CALL L276;
WAIT 10000 USEC;
A18[9..0] = $332;
V4 = 256;
CALL L276;
WAIT 10000 USEC;
A18[9..0] = $044;
V4 = 512;
CALL L276;
WAIT 10000 USEC;
L20:
ENDPROC;
PROCEDURE L21 USES DEVICE_DATA, TEMP_DATA, L31, L276, L32, L35;
IF (V42 == 1) THEN GOTO L25;
CALL L31;
IF (!V76) THEN GOTO L22;
A18[9..0] = $003;
V4 = 32;
CALL L276;
L22:
A18[9..0] = $079;
V4 = 1 | 2;
CALL L276;
WAIT 10000 USEC;
A18[9..0] = $006;
V4 = 256;
CALL L276;
A18[9..0] = $04A;
V4 = 512;
CALL L276;
WAIT 10000 USEC;
L23:
IF (!V76) THEN GOTO L24;
V80 = 0;
CALL L32;
IF (V42 != 0) THEN V42 = 10;
IF (V42 != 0) THEN GOTO L25;
L24:
A18[9..0] = $3FF;
CALL L276;
IF (V105) THEN CALL L35;
L25:
IF (V42 == 0) THEN
PRINT "DONE";
IF (V42 == 1) THEN
PRINT "Invalid option combination specified";
IF (V42 == 6) THEN
PRINT "Unrecognized device";
IF (V42 == 7) THEN
PRINT "Device revision is not supported";
IF (V42 == 10) THEN
PRINT "Device programming failure";
IF (V42 == 9) THEN
PRINT "Device is not blank";
IF (V42 == 11) THEN
PRINT "Device verify failure";
IF (V42 == 10) THEN
PRINT "Device configuration failure";
IF (V42 == 4) THEN
PRINT "Unable to read USERCODE/UES from device #", V84 + 1;
ENDPROC;
PROCEDURE L26 USES DEVICE_DATA, TEMP_DATA;
j = 0;
FOR i = 0 TO V1;
IF ((j <= V3) &&
((A13[i] & V4) != 0) &&
((A13[i] & 4) != 0)) THEN j = i + 1;
NEXT i;
IF (j > V3) THEN GOTO L27;
V2 = 0;
V3 = 0;
GOTO L29;
L27:
V2 = A12[j - 1];
V3 = j;
IF ((V4 == 32) || (V4 == 256) ||
(V4 == 512))
THEN GOTO L29;
IF (V58) THEN GOTO L28;
A41[9..0] = $066;
GOTO L29;
L28:
A41[9..0] = $006;
L29:
IF (V4 == 1) THEN A40[9..0] = $00E;
IF (V4 == 1) THEN A44[9..0] = $012;
IF (V4 == 2) THEN A40[9..0] = $38E;
IF (V4 == 2) THEN A44[9..0] = $392;
ENDPROC;
PROCEDURE L30 USES DEVICE_DATA, TEMP_DATA, L31
, L272
;
CALL L31;
IF (V32 == 0) THEN CALL L272;
V10 = 0;
V14 = 0;
V15 = 0;
V89 = 0;
V49 = 1;
V34 = 0;
V51 = -1;
V52 = -1;
V45 = 0;
V29 = 1;
IF (V103) THEN V29 = 0;
IF (V102 && V74) THEN V29 = 2;
ENDPROC;
PROCEDURE L31 USES DEVICE_DATA, TEMP_DATA;
FOR i = 0 TO V1;
A17[i] = (A13[i] | A48[i]);
IF (((A17[i] & 4) != 0) &&
((A17[i] & (1 | 256 | 2 | 512)) != 0) &&
!V102 && !V100 && !V103 && !V108 &&
!V107 && !V106 && V101) THEN
A17[i] = A17[i] & ~4;
IF (((A17[i] & 4) != 0) &&
((A17[i] & 32) != 0) && !V101 &&
(V102 || V100 || V103 || V108 ||
V107 || V106)) THEN
A17[i] = A17[i] & ~4;
NEXT i;
ENDPROC;
PROCEDURE L32 USES DEVICE_DATA, TEMP_DATA, L31;
INTEGER V79 = 32 * V0;
BOOLEAN A46[V79];
INTEGER A47[8];
INTEGER V145;
CALL L31;
STATE IDLE;
V27 = 0;
FOR i = 0 TO V1;
A18[9..0] = A39[(A25[i] - 1)..0];
IF ((A17[i] & (1 | 2 | 256 | 512)) != 0) THEN
A18[9..0] = $059;
IF ((A17[i] & 32) != 0) THEN
A18[9..0] = $006;
A32[(V27 + (A25[i] - 1))..V27] = A18[(A25[i] - 1)..0];
V27 = V27 + A25[i];
NEXT i;
IRSCAN V27, A32[(V27 - 1)..0];
WAIT IRPAUSE, 5 USEC, IDLE;
WAIT 3 CYCLES;
DRSCAN V79, A46[(V79 - 1)..0], CAPTURE A46[(V79 - 1)..0];
V27 = 0;
FOR i = 0 TO V1;
IF (A46[V27] == 1) THEN GOTO L33;
IF (V80) THEN
PRINT "Device #", V0 - i, " unable to read IDCODE";
IF (V101 && ((A17[i] & 32) != 0) &&
((A17[i] & 4) != 0)) THEN V42 = 6;
GOTO L34;
L33:
FOR j = 0 TO 7;
A47[j] = 0;
FOR k = 0 TO 3;
IF (A46[V27 + (4 * j) + k]) THEN
A47[j] = A47[j] | (1 << k);
NEXT k;
A47[j] = A47[j] + 48;
IF (A47[j] >= 58) THEN A47[j] = A47[j] + 7;
NEXT j;
IF (V80) THEN
PRINT "Device #", V0 - i, " IDCODE is ",
CHR$(A47[7]), CHR$(A47[6]),
CHR$(A47[5]), CHR$(A47[4]),
CHR$(A47[3]), CHR$(A47[2]),
CHR$(A47[1]), CHR$(A47[0]);
IF (V101 && ((A17[i] & 32) != 0) &&
((A17[i] & 4) != 0) && (A47[0] != 68) &&
(A47[1] != 68)) THEN
V42 = 6;
V27 = V27 + 31;
L34:
V27 = V27 + 1;
NEXT i;
V27 = 0;
FOR i = 0 TO V1;
IF(A61[i] != 0) THEN GOTO L32_3;
IF(A46[V27] != 0) THEN
V42 = 6;
V27 = V27 + 1;
NEXT i;
GOTO L32_4;
L32_3:
V145 = 0;
FOR j = 0 TO 31;
IF(A46[(V27 + j)]) THEN
V145 = V145 + (1 << j);
NEXT j;
V27 = V27 + 32;
IF(A61[i] != V145) THEN
V42 = 6;
NEXT i;
L32_4:
ENDPROC;
PROCEDURE L35 USES DEVICE_DATA, TEMP_DATA, L31, L276, L39;
j = 0;
k = V1;
V84 = V84 - 1;
IF (V84 == -1) THEN GOTO L37;
IF ((V84 < 0) || (V84 > V1) ||
(((A17[V1 - V84] & 256) == 0) &&
((A17[V1 - V84] & 32) == 0) &&
((A17[V1 - V84] & 512) == 0))) THEN
V42 = 4;
IF (V42 != 0) THEN GOTO L38;
L36:
j = V84;
k = V84;
L37:
CALL L31;
V4 = 256;
A18[9..0] = $006;
CALL L276;
V4 = 512;
A18[9..0] = $04A;
CALL L276;
WAIT 10000 USEC;
A18[9..0] = $3FF;
CALL L276;
STATE IDLE;
FOR i = 0 TO (V19 - 1);
A30[i] = 1;
NEXT i;
FOR i = j TO k;
V84 = i;
PUSH i; PUSH j; PUSH k;
CALL L31;
V4 = 0;
IF (((A17[V1 - V84] & 256) != 0) &&
((A17[V1 - V84] & 4) != 0)) THEN
V4 = 256;
IF (((A17[V1 - V84] & 32) != 0) &&
((A17[V1 - V84] & 4) != 0)) THEN
V4 = 32;
IF (((A17[V1 - V84] & 512) != 0) &&
((A17[V1 - V84] & 4) != 0)) THEN
V4 = 512;
IF (V4 != 0) THEN CALL L39;
POP k; POP j; POP i;
NEXT i;
L38:
ENDPROC;
PROCEDURE L39 USES DEVICE_DATA, TEMP_DATA, L276, L40;
j = V1 - V84;
FOR i = 0 TO V1;
IF (((A17[i] & V4) != 0) &&
((A17[i] & 4) != 0) && (i != j)) THEN
A17[i] = A17[i] | 8;
NEXT i;
IF (V4 == 256) THEN
A18[9..0] = $007;
IF (V4 == 512) THEN
A18[9..0] = $079;
IF (V4 == 32) THEN
A18[9..0] = $007;
CALL L276;
DRSCAN 32 + j, A30[(32 + j - 1)..0], CAPTURE A31[(32 + j - 1)..0];
V86 = 0;
FOR i = 0 TO 31;
IF (A31[i + j]) THEN
V86 = V86 | (1 << i);
NEXT i;
CALL L40;
ENDPROC;
PROCEDURE L40 USES DEVICE_DATA, TEMP_DATA;
INTEGER A58[8];
EXPORT "DEVICE", V84 + 1;
EXPORT "USERCODE", V86;
FOR i = 0 TO 7;
V27 = 0;
A58[i] = V86 & 15;
IF (A58[i] > 9) THEN V27 = 7;
A58[i] = A58[i] + 48 + V27;
V86 = V86 >> 4;
NEXT i;
PRINT "Device #", V84 + 1, " USERCODE code is ",
CHR$(A58[7]), CHR$(A58[6]),
CHR$(A58[5]), CHR$(A58[4]),
CHR$(A58[3]), CHR$(A58[2]),
CHR$(A58[1]), CHR$(A58[0]);
ENDPROC;
PROCEDURE L41 USES DEVICE_DATA, TEMP_DATA, L31
;
j = 0;
k = V1;
V34 = 1;
V29 = 1;
V84 = V84 - 1;
IF (V84 == -1) THEN GOTO L43;
IF ((V84 < 0) || (V84 > V1) ||
(((A17[V1 - V84] & 1) == 0) &&
((A17[V1 - V84] & 2) == 0))) THEN
V42 = 4;
IF (V42 != 0) THEN GOTO L44;
L42:
j = V84;
k = V84;
L43:
FOR i = j TO k;
V84 = i;
PUSH i; PUSH j; PUSH k;
CALL L31;
V86 = 0;
POP k; POP j; POP i;
NEXT i;
L44:
ENDPROC;
PROCEDURE L50 USES DEVICE_DATA, TEMP_DATA;
INTEGER V85[8];
EXPORT "DEVICE", V84 + 1;
EXPORT "UES", V86;
FOR i = 0 TO 3;
V27 = 0;
V85[i] = V86 & 15;
IF (V85[i] > 9) THEN V27 = 7;
V85[i] = V85[i] + 48 + V27;
V86 = V86 >> 4;
NEXT i;
PRINT "Device #", V84 + 1, " UES code is ",
CHR$(V85[3]), CHR$(V85[2]),
CHR$(V85[1]), CHR$(V85[0]);
ENDPROC;
PROCEDURE L56 USES DEVICE_DATA, TEMP_DATA, L30, L218, L276, L243;
PRINT "programming 7KAE/3KA/7KB device(s)...";
CALL L30;
IF (USE_REV0_PROG_ALG) THEN GOTO L57;
A18[9..0] = $016;
CALL L276;
GOTO L58;
L57:
V11 = 2;
CALL L218;
A18[9..0] = $012;
V91 = 1;
CALL L276;
V91 = 0;
L58:
FOR V10 = 2 TO V96;
CALL L243;
NEXT V10;
ENDPROC;
PROCEDURE L59 USES DEVICE_DATA, TEMP_DATA, L30, L218, L276, L243, L173, L287, L303;
CALL L30;
V11 = 0;
CALL L218;
IF (V103 && USE_REV0_PROG_ALG) THEN GOTO L60;
A18[9..0] = $016;
CALL L276;
GOTO L61;
L60:
A18[9..0] = $012;
V91 = 1;
CALL L276;
V91 = 0;
L61:
IF (!V103) THEN GOTO L62;
V75 = 1;
CALL L243;
V75 = 0;
GOTO L64;
L62:
V34 = 1;
CALL L173;
b = V74;
V74 = 1;
CALL L287;
V74 = b;
b = 0;
CALL L303;
FOR i = 0 TO (V24 - 1);
IF (A31[i] == A30[i]) THEN
GOTO L63;
IF (V74) THEN V42 = 9;
IF (!V74) THEN V42 = 11;
i = V24 - 1;
L63:
NEXT i;
L64:
ENDPROC;
PROCEDURE L79 USES DEVICE_DATA, TEMP_DATA, L276;
A18[9..0] = $00A;
CALL L276;
WAIT (V38 * 1000) USEC;
ENDPROC;
PROCEDURE L85 USES DEVICE_DATA, TEMP_DATA, L30, L218, L276, L173;
INTEGER V92 = 0;
IF (V74) THEN PRINT "blank checking 7KAE/3KA/7KB device(s)...";
IF (!V74) THEN PRINT "verifying 7KAE/3KA/7KB device(s)...";
L86:
CALL L30;
IF (V92 == 1) THEN V29 = 2;
V11 = 2;
CALL L218;
IF (V29 != 0) THEN GOTO L87;
A18[9..0] = $01E;
L87:
IF (V29 != 1) THEN GOTO L88;
A18[9..0] = $016;
L88:
IF (V29 != 2) THEN GOTO L89;
A18[9..0] = $01A;
L89:
CALL L276;
V45 = 1;
FOR V10 = 2 TO 6;
CALL L173;
NEXT V10;
IF (V42 != 0) THEN GOTO L90;
V45 = 0;
FOR V10 = 7 TO V96;
CALL L173;
NEXT V10;
IF (!V103 || (V29 != 0)) THEN
GOTO L90;
V92 = 1;
GOTO L86;
L90:
ENDPROC;
PROCEDURE L96 USES DEVICE_DATA, TEMP_DATA
, L85
;
V74 = 1;
IF (V4 == 256) THEN CALL L85;