// This configuration works for MC68HC908QY4
// PTA1 is Rx and PTB2 is Tx


uart "hc08_swuart" {
    clock_frequency_kHz     = 3200; 
    TIM_base_addr           = 0x20;
    TIM_prescaler           = 0;
    TIM_channel_base_addr   = 0x28;
    rx_pin_io_addr          = 0x00;          
    tx_pin_io_addr          = 0x01;
    rx_pin_ddr_addr         = 0x04;
    tx_pin_ddr_addr         = 0x05;
    rx_pin_offset           = 1;
    tx_pin_offset           = 2;
}