?? fw.lst
字號:
C51 COMPILER V7.06 FW 03/16/2004 14:49:39 PAGE 1
C51 COMPILER V7.06, COMPILATION OF MODULE FW
OBJECT MODULE PLACED IN fw.OBJ
COMPILER INVOKED BY: C:\Keil2\C51\BIN\C51.EXE fw.c DEBUG OBJECTEXTEND
stmt level source
1 //-----------------------------------------------------------------------------
2 // File: fw.c
3 // Contents: Firmware frameworks task dispatcher and device request parser
4 // source.
5 //
6 // indent 3. NO TABS!
7 //
8 // $Revision: 1 $
9 // $Date: 10/03/03 3:01p $
10 //
11 // Copyright (c) 1997 AnchorChips, Inc. All rights reserved
12 //-----------------------------------------------------------------------------
13 #include "fx2.h"
14 #include "fx2regs.h"
15
16 //-----------------------------------------------------------------------------
17 // Constants
18 //-----------------------------------------------------------------------------
19 #define DELAY_COUNT 0x9248*8L // Delay for 8 sec at 24Mhz, 4 sec at 48
20 #define _IFREQ 48000 // IFCLK constant for Synchronization Delay
21 #define _CFREQ 48000 // CLKOUT constant for Synchronization Delay
22
23 //-----------------------------------------------------------------------------
24 // Random Macros
25 //-----------------------------------------------------------------------------
26 #define min(a,b) (((a)<(b))?(a):(b))
27 #define max(a,b) (((a)>(b))?(a):(b))
28
29 // Registers which require a synchronization delay, see section 15.14
30 // FIFORESET FIFOPINPOLAR
31 // INPKTEND OUTPKTEND
32 // EPxBCH:L REVCTL
33 // GPIFTCB3 GPIFTCB2
34 // GPIFTCB1 GPIFTCB0
35 // EPxFIFOPFH:L EPxAUTOINLENH:L
36 // EPxFIFOCFG EPxGPIFFLGSEL
37 // PINFLAGSxx EPxFIFOIRQ
38 // EPxFIFOIE GPIFIRQ
39 // GPIFIE GPIFADRH:L
40 // UDMACRCH:L EPxGPIFTRIG
41 // GPIFTRIG
42
43 // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
44 // ...these have been replaced by GPIFTC[B3:B0] registers
45
46 #include "fx2sdly.h" // Define _IFREQ and _CFREQ above this #include
47
48 //-----------------------------------------------------------------------------
49 // Global Variables
50 //-----------------------------------------------------------------------------
51 volatile BOOL GotSUD;
52 BOOL Rwuen;
53 BOOL Selfpwr;
54 volatile BOOL Sleep; // Sleep mode enable flag
55
C51 COMPILER V7.06 FW 03/16/2004 14:49:39 PAGE 2
56 WORD pDeviceDscr; // Pointer to Device Descriptor; Descriptors may be moved
57 WORD pDeviceQualDscr;
58 WORD pHighSpeedConfigDscr;
59 WORD pFullSpeedConfigDscr;
60 WORD pConfigDscr;
61 WORD pOtherConfigDscr;
62 WORD pStringDscr;
63
64 extern code HIDDscr;
65 extern code REPORTDSCR ReportDscr;
66 extern code ReportDscrEnd;
67 extern code StringDscr1,StringDscr2,StringDscr0;
68 //-----------------------------------------------------------------------------
69 // Prototypes
70 //-----------------------------------------------------------------------------
71 void SetupCommand(void);
72 void TD_Init(void);
73 void TD_Poll(void);
74 BOOL TD_Suspend(void);
75 BOOL TD_Resume(void);
76
77 BOOL DR_GetDescriptor(void);
78 BOOL DR_SetConfiguration(void);
79 BOOL DR_GetConfiguration(void);
80 BOOL DR_SetInterface(void);
81 BOOL DR_GetInterface(void);
82 BOOL DR_GetStatus(void);
83 BOOL DR_ClearFeature(void);
84 BOOL DR_SetFeature(void);
85 BOOL DR_VendorCmnd(void);
86
87 // this table is used by the epcs macro
88 const char code EPCS_Offset_Lookup_Table[] =
89 {
90 0, // EP1OUT
91 1, // EP1IN
92 2, // EP2OUT
93 2, // EP2IN
94 3, // EP4OUT
95 3, // EP4IN
96 4, // EP6OUT
97 4, // EP6IN
98 5, // EP8OUT
99 5, // EP8IN
100 };
101
102 // macro for generating the address of an endpoint's control and status register (EPnCS)
103 #define epcs(EP) (EPCS_Offset_Lookup_Table[(EP & 0x7E) | (EP > 128)] + 0xE6A1)
104
105 //-----------------------------------------------------------------------------
106 // Code
107 //-----------------------------------------------------------------------------
108
109 // Task dispatcher
110 void main(void)
111 {
112 1 DWORD i;
113 1 WORD offset;
114 1 DWORD DevDescrLen;
115 1 DWORD j=0;
116 1 WORD IntDescrAddr;
117 1 WORD ExtDescrAddr;
C51 COMPILER V7.06 FW 03/16/2004 14:49:39 PAGE 3
118 1
119 1 // Initialize Global States
120 1 Sleep = FALSE; // Disable sleep mode
121 1 Rwuen = FALSE; // Disable remote wakeup
122 1 Selfpwr = FALSE; // Disable self powered
123 1 GotSUD = FALSE; // Clear "Got setup data" flag
124 1
125 1 // Initialize user device
126 1 TD_Init();
127 1
128 1 // The following section of code is used to relocate the descriptor table.
129 1 // Since the SUDPTRH and SUDPTRL are assigned the address of the descriptor
130 1 // table, the descriptor table must be located in on-part memory.
131 1 // The 4K demo tools locate all code sections in external memory.
132 1 // The descriptor table is relocated by the frameworks ONLY if it is found
133 1 // to be located in external memory.
134 1 pDeviceDscr = (WORD)&DeviceDscr;
135 1 pDeviceQualDscr = (WORD)&DeviceQualDscr;
136 1 pHighSpeedConfigDscr = (WORD)&HighSpeedConfigDscr;
137 1 pFullSpeedConfigDscr = (WORD)&FullSpeedConfigDscr;
138 1 pStringDscr = (WORD)&StringDscr;
139 1
140 1 if ((WORD)&DeviceDscr & 0xe000)
141 1 {
142 2 IntDescrAddr = INTERNAL_DSCR_ADDR;
143 2 ExtDescrAddr = (WORD)&DeviceDscr;
144 2 DevDescrLen = (WORD)&UserDscr - (WORD)&DeviceDscr + 2;
145 2 for (i = 0; i < DevDescrLen; i++)
146 2 *((BYTE xdata *)IntDescrAddr+i) = 0xCD;
147 2 for (i = 0; i < DevDescrLen; i++)
148 2 *((BYTE xdata *)IntDescrAddr+i) = *((BYTE xdata *)ExtDescrAddr+i);
149 2 pDeviceDscr = IntDescrAddr;
150 2 offset = (WORD)&DeviceDscr - INTERNAL_DSCR_ADDR;
151 2 pDeviceQualDscr -= offset;
152 2 pConfigDscr -= offset;
153 2 pOtherConfigDscr -= offset;
154 2 pHighSpeedConfigDscr -= offset;
155 2 pFullSpeedConfigDscr -= offset;
156 2 pStringDscr -= offset;
157 2 }
158 1
159 1 EZUSB_IRQ_ENABLE(); // Enable USB interrupt (INT2)
160 1 EZUSB_ENABLE_RSMIRQ(); // Wake-up interrupt
161 1
162 1 INTSETUP |= (bmAV2EN | bmAV4EN); // Enable INT 2 & 4 autovectoring
163 1
164 1 USBIE |= bmSUDAV | bmSUTOK | bmSUSP | bmURES | bmHSGRANT; // Enable selected interrupts
165 1 EA = 1; // Enable 8051 interrupts
166 1
167 1 #ifndef NO_RENUM
168 1 // Renumerate if necessary. Do this by checking the renum bit. If it
169 1 // is already set, there is no need to renumerate. The renum bit will
170 1 // already be set if this firmware was loaded from an eeprom.
171 1 if(!(USBCS & bmRENUM))
172 1 {
173 2 EZUSB_Discon(TRUE); // renumerate
174 2 }
175 1 #endif
176 1
177 1 // unconditionally re-connect. If we loaded from eeprom we are
178 1 // disconnected and need to connect. If we just renumerated this
179 1 // is not necessary but doesn't hurt anything
C51 COMPILER V7.06 FW 03/16/2004 14:49:39 PAGE 4
180 1 USBCS &=~bmDISCON;
181 1
182 1 CKCON = (CKCON&(~bmSTRETCH)) | FW_STRETCH_VALUE; // Set stretch to 0 (after renumeration)
183 1
184 1 // clear the Sleep flag.
185 1 Sleep = FALSE;
186 1
187 1 // Task Dispatcher
188 1 while(TRUE) // Main Loop
189 1 {
190 2 if(GotSUD) // Wait for SUDAV
191 2 {
192 3 SetupCommand(); // Implement setup command
193 3 GotSUD = FALSE; // Clear SUDAV flag
194 3 }
195 2
196 2 // Poll User Device
197 2 // NOTE: Idle mode stops the processor clock. There are only two
198 2 // ways out of idle mode, the WAKEUP pin, and detection of the USB
199 2 // resume state on the USB bus. The timers will stop and the
200 2 // processor will not wake up on any other interrupts.
201 2 if (Sleep)
202 2 {
203 3 if(TD_Suspend())
204 3 {
205 4 Sleep = FALSE; // Clear the "go to sleep" flag. Do it here to prevent any race c
-ondition between wakeup and the next sleep.
206 4 do
207 4 {
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -