/*	IO DEFINITIONS FOR MC68HC08GP20
 *	Copyright (c) 1998 by COSMIC Software
 */
#ifndef __IOGP20_H
#define __IOGP20_H

#if HIWARE
#include <hidef.h>
#endif

#define uint	unsigned int

/*	PORTS section
 */
volatile	char PORTA      @0x00;	/* port A */
volatile	char PORTB      @0x01;	/* port B */
volatile	char PORTC      @0x02;	/* port C */
volatile	char PORTD      @0x03;	/* port D */
volatile	char DDRA     @0x04;	/* data direction port A */

volatile	char DDRB     @0x05;	/* data direction port B */
volatile	char DDRC     @0x06;	/* data direction port C */
volatile	char DDRD     @0x07;	/* data direction port D */
volatile	char PORTE      @0x08;	/* port E */
volatile	char DDRE     @0x0c;	/* data direction port E */
volatile	char PTAPUE   @0x0d;	/* pull-up enable port A */
volatile	char PTCPUE   @0x0e;	/* pull-up enable port C */
volatile	char PTDPUE   @0x0f;	/* pull-up enable port D */

/*	SPI section
 */
volatile	char SPCR     @0x10;	/* SPI control register */
volatile	char SPSCR    @0x11;	/* SPI control/status register */
volatile	char SPDR     @0x12;	/* SPI data register */

/*	SCI section
 */
volatile	char SCC1     @0x13;	/* SCI control register 1 */
volatile	char SCC2     @0x14;	/* SCI control register 2 */
volatile	char SCC3     @0x15;	/* SCI control register 3 */
volatile	char SCS1     @0x16;	/* SCI status register 1 */
volatile	char SCS2     @0x17;	/* SCI status register 2 */
volatile	char SCDR     @0x18;	/* SCI data register */
volatile	char SCBR     @0x19;	/* SCI baud rate */

/*	KEYBOARD section
 */
volatile	char INTKBSCR @0x1a;	/* keyboard control/status */
volatile	char INTKBIER @0x1b;	/* keyboard interrupt enable */

/*	CONFIG section
 */
volatile	char TBCR     @0x1c;	/* time base module control */
volatile	char INTSCR   @0x1d;	/* IRQ status/control register */
volatile	char CONFIG2  @0x1e;	/* configuration register 2 */
volatile	char CONFIG1  @0x1f;	/* configuration register 1 */

/*	TIMER section
 */
volatile	char T1SC     @0x20;	/* timer 1 status/ctrl register */
volatile	uint T1CNT    @0x21;	/* timer 1 counter register */
volatile	char T1CNTH   @0x21;	/* timer 1 counter high */
volatile	char T1CNTL   @0x22;	/* timer 1 counter low */
volatile	uint T1MOD    @0x23;	/* timer 1 modulo register */
volatile	char T1MODH   @0x23;	/* timer 1 modulo high */
volatile	char T1MODL   @0x24;	/* timer 1 modulo low */
volatile	char T1SC0    @0x25;	/* timer 1 chan 0 status/ctrl */
volatile	uint T1CH0    @0x26;	/* timer 1 chan 0 register */
volatile	char T1CH0H   @0x26;	/* timer 1 chan 0 high */
volatile	char T1CH0L   @0x27;	/* timer 1 chan 0 low */
volatile	char T1SC1    @0x28;	/* timer 1 chan 1 status/ctrl */
volatile	uint T1CH1    @0x29;	/* timer 1 chan 1 register */
volatile	char T1CH1H   @0x29;	/* timer 1 chan 1 high */
volatile	char T1CH1L   @0x2a;	/* timer 1 chan 1 low */
volatile	char T2SC     @0x2b;	/* timer 2 status/ctrl register */
volatile	uint T2CNT    @0x2c;	/* timer 2 counter register */
volatile	char T2CNTH   @0x2c;	/* timer 2 counter high */
volatile	char T2CNTL   @0x2d;	/* timer 2 counter low */
volatile	uint T2MOD    @0x2e;	/* timer 2 modulo register */
volatile	char T2MODH   @0x2e;	/* timer 2 modulo high */
volatile	char T2MODL   @0x2f;	/* timer 2 modulo low */
volatile	char T2SC0    @0x30;	/* timer 2 chan 0 status/ctrl */
volatile	uint T2CH0    @0x31;	/* timer 2 chan 0 register */
volatile	char T2CH0H   @0x31;	/* timer 2 chan 0 high */
volatile	char T2CH0L   @0x32;	/* timer 2 chan 0 low */
volatile	char T2SC1    @0x33;	/* timer 2 chan 1 status/ctrl */
volatile	uint T2CH1    @0x34;	/* timer 2 chan 1 register */
volatile	char T2CH1H   @0x34;	/* timer 2 chan 1 high */
volatile	char T2CH1L   @0x35;	/* timer 2 chan 1 low */

/*	PLL section
 */
volatile	char PCTL     @0x36;	/* PLL control register */
volatile	char PBWC     @0x37;	/* PLL bandwidth control register*/
volatile	uint PMS      @0x38;	/* PLL multiplier select register */
volatile	char PMSH     @0x38;	/* PLL multiplier select high */
volatile	char PMSL     @0x39;	/* PLL multiplier select low */
volatile	char PMRS     @0x3a;	/* PLL VCO select range register */
volatile	char PMDS     @0x3b;	/* PLL reference divider register */

/*	ANALOG/DIGTAL section
 */
volatile	char ADSCR    @0x3c;	/* A/D status/ctrl register */
volatile	char ADR      @0x3d;	/* A/D data register */
volatile	char ADCLK    @0x3a;	/* A/D input clock register */

/*	SIM section
 */
volatile	char SBSR     @0xfe00;	/* SIM break status register */
volatile	char SRSR     @0xfe01;	/* SIM reset status register */
volatile	char SUBAR    @0xfe02;	/* SIM upper byte addess register */
volatile	char SBFCR    @0xfe03;	/* SIM break control register */
volatile	char INT1     @0xfe04;	/* interrupt status register 1 */
volatile	char INT2     @0xfe05;	/* interrupt status register 2 */
volatile	char INT3     @0xfe06;	/* interrupt status register 3 */
volatile	char FLTCR    @0xfe07;	/* FLASH test control register */
volatile	char FLCR     @0xfe08;	/* FLASH control register */
volatile	uint BRK      @0xfe09;	/* BREAK address register */
volatile	char BRKH     @0xfe09;	/* BREAK address register low */
volatile	char BRKL     @0xfe0a;	/* BREAK address register high */
volatile	char BRKSCR   @0xfe0b;	/* BREAK status/ctrl register */
volatile	char LVISR    @0xfe0c;	/* LVI status register */
volatile	char FLBPR    @0xfe80;	/* FLASH block protect register */
volatile	char COPCTL   @0xffff;	/* COP control register */


#define cli()   _asm("CLI\n");  //Enable interrupts
#define sti()   _asm("SEI\n");  //Enable interrupts

#undef uint

#endif