?? reg2410.h
字號:
/***************************************************************************\
Copyright (c) 2004-2007 threewater@up-tech.com, All rights reserved.
by threewter 2004.4.26
\***************************************************************************/
/***************************************************************************\
#說明: s3c2410 寄存器定義
---------------------------------- Bug --------------------------------------
---------------------------------- TODO list --------------------------------------
----------------------------------修正--------------------------------------
2004-4-26 創建
\***************************************************************************/
#ifndef __REG2410_H__
#define __REG2410_H__
#include "../inc/macro.h"
#include "gpio.h"
#include "cpu.h"
#define SDRAM_BASE 0x30000000
#define SDRAM_SIZE (64*SIZE_1MB)
//串口地址定義
#define UART_CTL_BASE 0x50000000
#define UART0_CTL_BASE UART_CTL_BASE
#define UART1_CTL_BASE UART_CTL_BASE + 0x4000
#define UART2_CTL_BASE UART_CTL_BASE + 0x8000
#define bUART(x, Nb) __REG(UART_CTL_BASE + (x)*0x4000 + (Nb))
/* Offset */
#define oULCON 0x00 /* R/W, UART line control register */
#define oUCON 0x04 /* R/W, UART control register */
#define oUFCON 0x08 /* R/W, UART FIFO control register */
#define oUMCON 0x0C /* R/W, UART modem control register */
#define oUTRSTAT 0x10 /* R , UART Tx/Rx status register */
#define oUERSTAT 0x14 /* R , UART Rx error status register */
#define oUFSTAT 0x18 /* R , UART FIFO status register */
#define oUMSTAT 0x1C /* R , UART Modem status register */
#define oUTXHL 0x20 /* W, UART transmit(little-end) buffer */
#define oUTXHB 0x23 /* W, UART transmit(big-end) buffer */
#define oURXHL 0x24 /* R , UART receive(little-end) buffer */
#define oURXHB 0x27 /* R , UART receive(big-end) buffer */
#define oUBRDIV 0x28 /* R/W, Baud rate divisor register */
//時鐘
#define CLK_CTL_BASE 0x4C000000
#define bCLKCTL(Nb) __REG(CLK_CTL_BASE + (Nb))
/* Offset */
#define oLOCKTIME 0x00 /* R/W, PLL lock time count register */
#define oMPLLCON 0x04 /* R/W, MPLL configuration register */
#define oUPLLCON 0x08 /* R/W, UPLL configuration register */
#define oCLKCON 0x0C /* R/W, Clock generator control reg. */
#define oCLKSLOW 0x10 /* R/W, Slow clock control register */
#define oCLKDIVN 0x14 /* R/W, Clock divider control */
/* Registers */
#define rLOCKTIME bCLKCTL(oLOCKTIME)
#define rMPLLCON bCLKCTL(oMPLLCON)
#define rUPLLCON bCLKCTL(oUPLLCON)
#define rCLKCON bCLKCTL(oCLKCON)
#define rCLKSLOW bCLKCTL(oCLKSLOW)
#define rCLKDIVN bCLKCTL(oCLKDIVN)
/* Fields */
#define fPLL_MDIV Fld(8,12)
#define fPLL_PDIV Fld(6,4)
#define fPLL_SDIV Fld(2,0)
/* bits */
#define CLKCON_SPI (1<<18)
#define CLKCON_IIS (1<<17)
#define CLKCON_IIC (1<<16)
#define CLKCON_ADC (1<<15)
#define CLKCON_RTC (1<<14)
#define CLKCON_GPIO (1<<13)
#define CLKCON_UART2 (1<<12)
#define CLKCON_UART1 (1<<11)
#define CLKCON_UART0 (1<<10)
#define CLKCON_SDI (1<<9)
#define CLKCON_PWM (1<<8)
#define CLKCON_USBD (1<<7)
#define CLKCON_USBH (1<<6)
#define CLKCON_LCDC (1<<5)
#define CLKCON_NAND (1<<4)
#define CLKCON_POWEROFF (1<<3)
#define CLKCON_IDLE (1<<2)
// PWM Timer
#define TIMER_BASE 0x51000000
#define rTCFG0 __REG(TIMER_BASE) //Timer 0 configuration
#define rTCFG1 __REG(TIMER_BASE+0x4) //Timer 1 configuration
#define rTCON __REG(TIMER_BASE+0x8) //Timer control
#define rTCNTB0 __REG(TIMER_BASE+0xc) //Timer count buffer 0
#define rTCMPB0 __REG(TIMER_BASE+0x10) //Timer compare buffer 0
#define rTCNTO0 __REG(TIMER_BASE+0x14) //Timer count observation 0
#define rTCNTB1 __REG(TIMER_BASE+0x18) //Timer count buffer 1
#define rTCMPB1 __REG(TIMER_BASE+0x1c) //Timer compare buffer 1
#define rTCNTO1 __REG(TIMER_BASE+0x20) //Timer count observation 1
#define rTCNTB2 __REG(TIMER_BASE+0x24) //Timer count buffer 2
#define rTCMPB2 __REG(TIMER_BASE+0x28) //Timer compare buffer 2
#define rTCNTO2 __REG(TIMER_BASE+0x2c) //Timer count observation 2
#define rTCNTB3 __REG(TIMER_BASE+0x30) //Timer count buffer 3
#define rTCMPB3 __REG(TIMER_BASE+0x34) //Timer compare buffer 3
#define rTCNTO3 __REG(TIMER_BASE+0x38) //Timer count observation 3
#define rTCNTB4 __REG(TIMER_BASE+0x3c) //Timer count buffer 4
#define rTCNTO4 __REG(TIMER_BASE+0x40) //Timer count observation 4
#define TCON_4_AUTO (1 << 22) /* auto reload on/off for Timer 4 */
#define TCON_4_UPDATE (1 << 21) /* manual Update TCNTB4 */
#define TCON_4_ONOFF (1 << 20) /* 0: Stop, 1: start Timer 4 */
#define TCON_3_AUTO (1 << 19) /* auto reload on/off for Timer 3 */
#define TCON_3_INVERT (1 << 18) /* 1: Inverter on for TOUT3 */
#define TCON_3_MAN (1 << 17) /* manual Update TCNTB3,TCMPB3 */
#define TCON_3_ONOFF (1 << 16) /* 0: Stop, 1: start Timer 3 */
#define TCON_2_AUTO (1 << 15) /* auto reload on/off for Timer 3 */
#define TCON_2_INVERT (1 << 14) /* 1: Inverter on for TOUT3 */
#define TCON_2_MAN (1 << 13) /* manual Update TCNTB3,TCMPB3 */
#define TCON_2_ONOFF (1 << 12) /* 0: Stop, 1: start Timer 3 */
#define TCON_1_AUTO (1 << 11) /* auto reload on/off for Timer 3 */
#define TCON_1_INVERT (1 << 10) /* 1: Inverter on for TOUT3 */
#define TCON_1_MAN (1 << 9) /* manual Update TCNTB3,TCMPB3 */
#define TCON_1_ONOFF (1 << 8) /* 0: Stop, 1: start Timer 3 */
#define TCON_0_AUTO (1 << 3) /* auto reload on/off for Timer 3 */
#define TCON_0_INVERT (1 << 2) /* 1: Inverter on for TOUT3 */
#define TCON_0_MAN (1 << 1) /* manual Update TCNTB3,TCMPB3 */
#define TCON_0_ONOFF (1 << 0) /* 0: Stop, 1: start Timer 3 */
// WATCH DOG TIMER
#define WATCHDOG_BASE 0x53000000
#define rWTCON __REG(WATCHDOG_BASE) //Watch-dog timer mode
#define rWTDAT __REG(WATCHDOG_BASE+4) //Watch-dog timer data
#define rWTCNT __REG(WATCHDOG_BASE+8) //Eatch-dog timer count
// INTERRUPT
#define INTERRUPT_BASE 0x4a000000
#define rSRCPND __REG(INTERRUPT_BASE) //Interrupt request status
#define rINTMOD __REG(INTERRUPT_BASE+0x4) //Interrupt mode control
#define rINTMSK __REG(INTERRUPT_BASE+0x8) //Interrupt mask control
#define rPRIORITY __REG(INTERRUPT_BASE+0xc) //IRQ priority control
#define rINTPND __REG(INTERRUPT_BASE+0x10) //Interrupt request status
#define rINTOFFSET __REG(INTERRUPT_BASE+0x14) //Interruot request source offset
#define rSUBSRCPND __REG(INTERRUPT_BASE+0x18) //Sub source pending
#define rINTSUBMSK __REG(INTERRUPT_BASE+0x1c) //Interrupt sub mask
//LCD
#define bLCD_CTL(Nb) __REG(0x4d000000 + (Nb))
#define rLCDCON1 bLCD_CTL(0x00)
#define rLCDCON2 bLCD_CTL(0x04)
#define rLCDCON3 bLCD_CTL(0x08)
#define rLCDCON4 bLCD_CTL(0x0c)
#define rLCDCON5 bLCD_CTL(0x10)
#define rLCDADDR1 bLCD_CTL(0x14)
#define rLCDADDR2 bLCD_CTL(0x18)
#define rLCDADDR3 bLCD_CTL(0x1c)
#define rREDLUT bLCD_CTL(0x20)
#define rGREENLUT bLCD_CTL(0x24)
#define rBLUELUT bLCD_CTL(0x28)
#define rDITHMODE bLCD_CTL(0x4c)
#define rTPAL bLCD_CTL(0x50)
#define rLCDINTPND bLCD_CTL(0x54)
#define rLCDSRCPND bLCD_CTL(0x58)
#define rLCDINTMSK bLCD_CTL(0x5c)
#define rLCDLPCSEL bLCD_CTL(0x60)
//nand flash
#define bNAND_CTL(Nb) __REG(0x4e000000 + (Nb))
#define rNFCONF (*(volatile unsigned *)0x4e000000) //NAND Flash configuration
#define rNFCMD (*(volatile U8 *)0x4e000004) //NADD Flash command
#define rNFADDR (*(volatile U8 *)0x4e000008) //NAND Flash address
#define rNFDATA (*(volatile U8 *)0x4e00000c) //NAND Flash data
#define rNFSTAT (*(volatile unsigned *)0x4e000010) //NAND Flash operation status
#define rNFECC (*(volatile unsigned *)0x4e000014) //NAND Flash ECC
#define rNFECC0 (*(volatile U8 *)0x4e000014)
#define rNFECC1 (*(volatile U8 *)0x4e000015)
#define rNFECC2 (*(volatile U8 *)0x4e000016)
/****************************************************************\
iic register
\****************************************************************/
#define bIIC(Nb) __REG(0x54000000 + (Nb))
#define rIICCON bIIC(0x00) //IIC control
#define rIICSTAT bIIC(0x04) //IIC status
#define rIICADD bIIC(0x08) //IIC address
#define rIICDS bIIC(0x0c) //IIC data shift
/****************************************************************\
spi register
\****************************************************************/
#define bSPI(Nb) __REG(0x59000000 + (Nb))
#define rSPCON0 bSPI(0x00)
#define rSPSTA0 bSPI(0x04)
#define rSPPIN0 bSPI(0x08)
#define rSPPRE0 bSPI(0x0c)
#define rSPTDAT0 bSPI(0x10)
#define rSPRDAT0 bSPI(0x14)
#define rSPCON1 bSPI(0x20 + 0x00)
#define rSPSTA1 bSPI(0x20 + 0x04)
#define rSPPIN1 bSPI(0x20 + 0x08)
#define rSPPRE1 bSPI(0x20 + 0x0c)
#define rSPTDAT1 bSPI(0x20 + 0x10)
#define rSPRDAT1 bSPI(0x20 + 0x14)
#endif //#ifndef __REG2410_H__
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -