#include <string.h>
#include <stdlib.h>
#include "..\inc\44b.h"
#include "..\inc\44blib.h"
#include "..\inc\def.h"
#include "..\inc\rtc.h"

#define KEY_BUFLEN 100
#define AFC_BUFLEN 0x100

char Uart_IntGetkey(void);
void Uart_Port(void);
void Return_Port(void);

void __irq Uart0_TxFifoInt(void);
void __irq Uart0_RxFifoInt(void);
void __irq Uart0_RxFifoErrorInt(void);

void __irq Uart0_RxInt(void);
void __irq Uart0_TxInt(void);

void __irq Uart1_TxFifoInt(void);
void __irq Uart1_RxFifoInt(void);
void __irq Uart1_RxFifoErrorInt(void);

void __irq Uart1_RxInt(void);
void __irq Uart1_TxInt(void);

void __irq U1AFC_TxInt(void);
void __irq U0AFC_RxInt(void);
void __irq U0AFC_RxErrorInt(void);

void __irq Exint2(void);
void __irq Test_Done(void);
void __irq Error(void);

static unsigned char keyBuf[KEY_BUFLEN];
volatile static int keyBufRdPt=0;
volatile static int keyBufWrPt=0;
volatile char out=1;
volatile static char *uart0TxStr;
volatile static char *uart1TxStr;

volatile U32 save_UC,save_UE,save_UF,save_UPC,save_UPE,save_UPF;

void Uart_Port(void)
{
    save_UC=rPCONC;//for nRTS0,nCTS0
    save_UE=rPCONE;//for TxD0,RxD0
    save_UF=rPCONF;//for nRTS1,TxD1,RxD1,nCTS1
    save_UPC=rPUPC;
    save_UPE=rPUPE;
    save_UPF=rPUPF;

    rPCONC |=0xf0000000;
    rPUPC |=0xc000;
    rPCONE=(rPCONE &0x3ffeb)|0x28;
    rPUPE |=0x6; 
    rPCONF=(rPCONF &0x3ff)+0x124800;
    rPUPF |=0x1e0;
}


void Return_Port(void)
{
    rPCONC=save_UC;
    rPCONE=save_UE;
    rPCONF=save_UF;
    rPUPC=save_UPC;
    rPUPE=save_UPE;
    rPUPF=save_UPF;
}


char Uart_IntGetkey(void)
{
    if(keyBufRdPt==KEY_BUFLEN)
	keyBufRdPt=0;

    while(keyBufWrPt==keyBufRdPt);  //until FIFO is triggered
    return keyBuf[keyBufRdPt++];
}

////////UART 0 TEST////////////////

void Test_Uart0Fifo(void)
{
    int key;

    Uart_Port();
    keyBufRdPt=keyBufWrPt=0;
    pISR_UTXD0=(unsigned)Uart0_TxFifoInt;
    pISR_URXD0=(unsigned)Uart0_RxFifoInt;
    pISR_UERR01=(unsigned)Uart0_RxFifoErrorInt;

    /*********** UART0 Tx FIFO test with interrupt ***********/     
    Uart_Printf("[Uart channel 0 tx FIFO Interrupt Test]\n");
    Uart_TxEmpty(0);	//wait until tx shifter is empty.

    uart0TxStr="UART0 Tx FIFO interrupt test is good!!!!\r\n";
    rUFCON0=(2<<6)|(1<<4)|(6)|1;
    //FIFO trigger:tx/rx:8byte,tx/rx_fifo reset(will be cleared),FIFO enable.
    rUCON0 = 0x244;	//tx:levl,rx:edge,error int,normal*2,interrupt(Start)
    rINTMSK=~(BIT_GLOBAL|BIT_UTXD0);

    Delay(500);
    /*********** UART0 Tx FIFO test with BDMA0 ***********/ 
    Uart_Init(0,115200);
    Uart_Printf("\n[Uart0 FIFO Tx Test by BDMA0]\n");
    uart0TxStr="UART0 Tx FIFO Test by BDMA0 is good!!!!\r\n";
    Uart_TxEmpty(0);

    rUCON0=0x48;	//tx:BDMA0 rx:disable

    rBDICNT0=0;
    rBDCON0 =0x0;
    rBDISRC0=(unsigned int)uart0TxStr|(0<<30)|(1<<28);  // byte,inc
    rBDIDES0=UTXH0 |(1<<30)|(3<<28);  //L/B endian,M2IO,fix
    rBDICNT0=strlen((char *)uart0TxStr)|(2<<30)|(1<<26)|(0<<20); //UART0,start,polling
    rBDICNT0 |= (1<<20); //enable

    while(!((rBDCON0&0x30)==0x20));        
    Uart_TxEmpty(0);
    
    /*********** UART0 Rx FIFO test with interrupt ***********/ 
    rUCON0=0x245|0x80;	//tx:level,rx:edge,tx/rx:int,rcv_time_out enabled,error int enable

    Uart_Printf("\n[Uart channel 0 FIFO Rx Interrupt Test]:Type any key!!!\n");
    Uart_Printf("You have to see the typed character. To quit, press Enter key.\n");

    rINTMSK=~(BIT_GLOBAL|BIT_URXD0|BIT_UERR01);

    while( (rUFSTAT0&0xf) >0 )
        key=RdURXH0();  //To clear the Rx FIFO
    rUERSTAT0;	        //To clear the error state

    while((key=Uart_IntGetkey())!='\r')
        Uart_SendByte(key);

    rUFCON0=(2<<6)|(1<<4)|(6)|0;  
    //FIFO trigger:tx/rx:8byte, txrx_fifo reset(will be cleared), FIFO disable.

    rINTMSK=~BIT_GLOBAL;
    rUCON0=0x45;	//rcv_time_out disabled
    Uart_Printf("\n");
    Return_Port();
}


void __irq Uart0_TxFifoInt(void)
{
    while( !(rUFSTAT0 & 0x200) && (*uart0TxStr != '\0') )   //until tx fifo full or end of string
    {
	rUTXH0=*uart0TxStr++;
	//for(i=0;i<700;i++); //to avoid overwriting FIFO
    }

    rI_ISPC=BIT_UTXD0;        
    if(*uart0TxStr == '\0')
	SET_INTMSK_IRQ(BIT_UTXD0);//work around for ES2
}


void __irq Uart0_RxFifoInt(void)
{
    rI_ISPC=BIT_URXD0;
//  if(rUFSTAT0==0)
//	Uart_Printf("time out\n");
    while( (rUFSTAT0&0xf) >0 )	    //until FIFO is empty
    {
	keyBuf[keyBufWrPt++]=rURXH0;//rx buffer->keyBuf[]
	if(keyBufWrPt==KEY_BUFLEN)
	    keyBufWrPt=0;
    }
}


void __irq Uart0_RxFifoErrorInt(void)
{
    rI_ISPC=BIT_UERR01;

    Uart_Printf("UERSTAT0 = 0x%x\n", rUERSTAT0 & 0xf);
    while( (rUFSTAT0&0xf) >0 )
    {
	    keyBuf[keyBufWrPt++]=rURXH0;
	    if(keyBufWrPt==KEY_BUFLEN)
		    keyBufWrPt=0;
    }
}


void Test_Uart0(void)
{
    int key;
    Uart_Port(); 
    keyBufRdPt=keyBufWrPt=0;
    pISR_UTXD0=(unsigned)Uart0_TxInt;
    pISR_URXD0=(unsigned)Uart0_RxInt;
    
    /*********** UART0 Tx test with interrupt ***********/  
    Uart_Printf("[Uart channel 0 tx Interrupt Test]\n");
    Uart_TxEmpty(0); //wait until tx shifter is empty.

    uart0TxStr="UART0 Tx interrupt test is good!!!!\r\n";

    rUCON0 = 0x244; //tx:level,rx:edge,error int,normal*2,interrupt(Start)
    rINTMSK=~(BIT_GLOBAL|BIT_UTXD0);
//	rUCON0 &= 0x3f3;   
//	rUCON0 |= 0x4;  //needed to set the UTXD0 pending bit.

    Delay(3000);
//  rINTMSK =(BIT_GLOBAL|BIT_UTXD0);
//  rINTMSK=~BIT_GLOBAL;
//  Led_Display(0);
//  Led_Display(0xf);
//  return;

    /*********** UART0 Tx test with BDMA0 ***********/ 
    rUCON0 = 0x245;//workaround

    Uart_Printf("\n[Uart0 Tx Test by BDMA0]\n");
    uart0TxStr="UART0 Tx Test by BDMA0 is good!!!!\r\n";
    Uart_TxEmpty(0);

    rUCON0=0x48;    //tx:BDMA0 rx:disable

    rBDICNT0=0x0;
    rBDCON0 =0x0;
    rBDISRC0=(unsigned int)uart0TxStr|(0<<30)|(1<<28);  // byte,inc
    rBDIDES0=UTXH0 |(1<<30)|(3<<28);	//L/B endian,M2IO,fix   
    rBDICNT0=strlen((char *)uart0TxStr)|(2<<30)|(1<<26)|(0<<20); //UART0,
    rBDICNT0 |= (1<<20); //enable

    while(!((rBDCON0&0x30)==0x20));
    Uart_TxEmpty(0);

    /*********** UART0 Rx test with interrupt ***********/
    rUCON0=0x45;    //tx:int rx:int

    Uart_Printf("\n[Uart channel 0 Rx Interrupt Test]:Type any key!!!\n");
    Uart_Printf("You will see the typed character. To quit, press Enter key.\n");
    Uart_TxEmpty(0);

    rINTMSK=~(BIT_GLOBAL|BIT_URXD0);

    keyBufRdPt=keyBufWrPt=0;
    while((key=Uart_IntGetkey())!='\r')
	    Uart_SendByte(key);

    rINTMSK=~BIT_GLOBAL;
    Uart_Printf("\n");
    Return_Port();
}


void __irq Uart0_RxInt(void)
{
    rI_ISPC=BIT_URXD0;

    keyBuf[keyBufWrPt++]=RdURXH0();
    if(keyBufWrPt==KEY_BUFLEN)
		keyBufWrPt=0;
}

//unsigned int txcount=0;
void __irq Uart0_TxInt(void)
{
//    rI_ISPC=BIT_UTXD0; //This cann't make the pending bit be cleared in the level trigger mode.

    if(*uart0TxStr != '\0')
    {
	WrUTXH0(*uart0TxStr++);
	rI_ISPC=BIT_UTXD0; //Because UART operates using level trigger mode.
    }
    else
    {
	rUCON0 &= 0x3f3;//workaround
	rI_ISPC=BIT_UTXD0;  //This cann't make the pending bit be cleared in the level trigger mode.
	rINTMSK|=BIT_UTXD0;
    }
}

////////UART 1 TEST////////////////

void Test_Uart1Fifo(void)
{
    int key;
    Uart_Port();
    keyBufRdPt=keyBufWrPt=0;
    pISR_UTXD1=(unsigned)Uart1_TxFifoInt;
    pISR_URXD1=(unsigned)Uart1_RxFifoInt;
    pISR_UERR01=(unsigned)Uart1_RxFifoErrorInt;

    /*********** UART1 Tx FIFO test with interrupt ***********/     
    Uart_Printf("[Uart channel 1 tx FIFO Interrupt Test]\n");
    Uart_Printf("Plug the serial cable into ch1 connector!!! \n");
    Uart_Printf("Then, press any key through UART ch1.\n");
    Uart_Select(1);
    Uart_Getch();

    uart1TxStr="UART1 Tx FIFO interrupt test is good!!\r\n";
    rUFCON1=(2<<6)|(1<<4)|(6)|1;
    //FIFO trigger:tx/rx:8byte,tx/rx_fifo reset(will be cleared),FIFO enable.
    rUCON1 = 0x244;             //rx:edge,tx:level,error int,normal*2,interrupt(Start)    
    rINTMSK=~(BIT_GLOBAL|BIT_UTXD1);

    Delay(500);
    /*********** UART1 Tx FIFO test with BDMA1 ***********/ 
    Uart_Init(0,115200);
    Uart_Printf("\n[Uart1 FIFO Tx Test by BDMA1]\n");
    uart1TxStr="UART1 Tx Test by BDMA0 is good!!!!\r\n";
    Uart_TxEmpty(1);

    rUCON1=0x4c;	//tx:BDMA1 rx:disable

    rBDICNT1=0;
    rBDCON1 =0x0;
    rBDISRC1=(unsigned int)uart1TxStr|(0<<30)|(1<<28);  // byte,inc
    rBDIDES1=UTXH1 |(1<<30)|(3<<28);  //L/B endian,M2IO,fix
    rBDICNT1=strlen((char *)uart1TxStr)|(2<<30)|(1<<26)|(0<<20); //UART1,start,polling
    rBDICNT1 |= (1<<20); //enable

    while((rBDCON1&0x30)==0x10);        
    Uart_TxEmpty(1);
    
    /*********** UART1 Rx FIFO test with interrupt ***********/ 
    rUCON1=0x245|0x80;	//rx:edge,tx:level,tx/rx:int,rcv_time_out enabled,error int enable

    Uart_Printf("\n[Uart channel 1 FIFO Rx Interrupt Test]:Type any key!!!\n");
    Uart_Printf("You have to see the typed character. To quit, press Enter key.\n");

    rINTMSK=~(BIT_GLOBAL|BIT_URXD1|BIT_UERR01);
    keyBufRdPt=keyBufWrPt=0;
    while( (rUFSTAT1&0xf) >0 )
	key=RdURXH1();  //To clear the Rx FIFO
    rUERSTAT1;          //To clear the error state

    while((key=Uart_IntGetkey())!='\r')
	Uart_SendByte(key);

    rUFCON1=(2<<6)|(1<<4)|(6)|0;  
    //FIFO trigger:tx/rx:8byte, txrx_fifo reset(will be cleared), FIFO disable.

    rINTMSK=~BIT_GLOBAL;
    rUCON1=0x45;	//rcv_time_out disabled
    Uart_Printf("\n");

    Uart_Printf("Plug the serial cable into ch0 as before this test!!!\n");
    Uart_Printf("Then, press any key through UART ch 0.\n");
    Uart_Select(0);
    Uart_Getch();
    Return_Port();
}


void __irq Uart1_TxFifoInt(void)
{
    int i;
    while( !(rUFSTAT1 == 16) && (*uart1TxStr != '\0') )   //until tx fifo full or end of string
    {
	rUTXH1=*uart1TxStr++;
	for(i=0;i<700;i++); //to avoid overwriting FIFO
    }

    rI_ISPC=BIT_UTXD1;
    if(*uart1TxStr == '\0')
	SET_INTMSK_IRQ(BIT_UTXD1);//work around for ES2
}


void __irq Uart1_RxFifoInt(void)
{
    rI_ISPC=BIT_URXD1;
//  if(rUFSTAT1==0)
//	Uart_Printf("time out\n");
    while( (rUFSTAT1&0xf) >0 )	    //until FIFO is empty
    {