0 = /dev/pda0		First PDA device		  1 = /dev/pda1		Second PDA device		    ...		The pda devices are used to mount filesystems on		remote pda's (basically slow handheld machines with		proprietary OS's and limited memory and storage		running small fs translation drivers) through serial /		IRDA / parallel links.		NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc 60-63		LOCAL/EXPERIMENTAL USE		Allocated for local/experimental use.  For devices not		assigned official numbers, these ranges should be		used, in order to avoid conflicting with future assignments. 64 char	ENskip kernel encryption package		  0 = /dev/enskip	Communication with ENskip kernel module 65 char	Sundance "plink" Transputer boards		  0 = /dev/plink0	First plink device		  1 = /dev/plink1	Second plink device		  2 = /dev/plink2	Third plink device		  3 = /dev/plink3	Fourth plink device		 64 = /dev/rplink0	First plink device, raw		 65 = /dev/rplink1	Second plink device, raw		 66 = /dev/rplink2	Third plink device, raw		 67 = /dev/rplink3	Fourth plink device, raw		128 = /dev/plink0d	First plink device, debug		129 = /dev/plink1d	Second plink device, debug		130 = /dev/plink2d	Third plink device, debug		131 = /dev/plink3d	Fourth plink device, debug		192 = /dev/rplink0d	First plink device, raw, debug		193 = /dev/rplink1d	Second plink device, raw, debug		194 = /dev/rplink2d	Third plink device, raw, debug		195 = /dev/rplink3d	Fourth plink device, raw, debug		This is a commercial driver; contact James Howes		<jth@prosig.demon.co.uk> for information.    block	SCSI disk devices (16-31)		  0 = /dev/sdq		16th SCSI disk whole disk		 16 = /dev/sdr		17th SCSI disk whole disk		 32 = /dev/sds		18th SCSI disk whole disk		    ...		240 = /dev/sdaf		32nd SCSI disk whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15. 66 char	YARC PowerPC PCI coprocessor card		  0 = /dev/yppcpci0	First YARC card		  1 = /dev/yppcpci1	Second YARC card		    ...    block	SCSI disk devices (32-47)		  0 = /dev/sdag		33th SCSI disk whole disk		 16 = /dev/sdah		34th SCSI disk whole disk		 32 = /dev/sdai		35th SCSI disk whole disk		    ...		240 = /dev/sdav		48nd SCSI disk whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15. 67 char	Coda network file system		  0 = /dev/cfs0		Coda cache manager		See http://www.coda.cs.cmu.edu for information about Coda.    block	SCSI disk devices (48-63)		  0 = /dev/sdaw		49th SCSI disk whole disk		 16 = /dev/sdax		50th SCSI disk whole disk		 32 = /dev/sday		51st SCSI disk whole disk		    ...		240 = /dev/sdbl		64th SCSI disk whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15. 68 char	CAPI 2.0 interface		  0 = /dev/capi20	Control device		  1 = /dev/capi20.00	First CAPI 2.0 application		  2 = /dev/capi20.01	Second CAPI 2.0 application		    ...		 20 = /dev/capi20.19	19th CAPI 2.0 application		ISDN CAPI 2.0 driver for use with CAPI 2.0		applications; currently supports the AVM B1 card.    block	SCSI disk devices (64-79)		  0 = /dev/sdbm		64th SCSI disk whole disk		 16 = /dev/sdbn		65th SCSI disk whole disk		 32 = /dev/sdbo		66th SCSI disk whole disk		    ...		240 = /dev/sdcb		80th SCSI disk whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15. 69 char	MA16 numeric accelerator card		  0 = /dev/ma16		Board memory access    block	SCSI disk devices (80-95)		  0 = /dev/sdcc		81st SCSI disk whole disk		 16 = /dev/sdcd		82nd SCSI disk whole disk		 32 = /dev/sdce		83th SCSI disk whole disk		    ...		240 = /dev/sdcr		96th SCSI disk whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15. 70 char	SpellCaster Protocol Services Interface		  0 = /dev/apscfg	Configuration interface		  1 = /dev/apsauth	Authentication interface		  2 = /dev/apslog	Logging interface		  3 = /dev/apsdbg	Debugging interface		 64 = /dev/apsisdn	ISDN command interface		 65 = /dev/apsasync	Async command interface		128 = /dev/apsmon	Monitor interface    block	SCSI disk devices (96-111)		  0 = /dev/sdcs		97th SCSI disk whole disk		 16 = /dev/sdct		98th SCSI disk whole disk		 32 = /dev/sdcu		99th SCSI disk whole disk		    ...		240 = /dev/sddh		112nd SCSI disk whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15. 71 char	Computone IntelliPort II serial card		  0 = /dev/ttyF0	IntelliPort II board 0, port 0		  1 = /dev/ttyF1	IntelliPort II board 0, port 1		    ...		 63 = /dev/ttyF63	IntelliPort II board 0, port 63		 64 = /dev/ttyF64	IntelliPort II board 1, port 0		 65 = /dev/ttyF65	IntelliPort II board 1, port 1		    ...		127 = /dev/ttyF127	IntelliPort II board 1, port 63		128 = /dev/ttyF128	IntelliPort II board 2, port 0		129 = /dev/ttyF129	IntelliPort II board 2, port 1		    ...		191 = /dev/ttyF191	IntelliPort II board 2, port 63		192 = /dev/ttyF192	IntelliPort II board 3, port 0		193 = /dev/ttyF193	IntelliPort II board 3, port 1		    ...		255 = /dev/ttyF255	IntelliPort II board 3, port 63    block	SCSI disk devices (112-127)		  0 = /dev/sddi		113th SCSI disk whole disk		 16 = /dev/sddj		114th SCSI disk whole disk		 32 = /dev/sddk		115th SCSI disk whole disk		    ...		240 = /dev/sddx		128th SCSI disk whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15. 72 char	Computone IntelliPort II serial card - alternate devices		  0 = /dev/cuf0		Callout device for ttyF0		  1 = /dev/cuf1		Callout device for ttyF1		    ...		 63 = /dev/cuf63	Callout device for ttyF63		 64 = /dev/cuf64	Callout device for ttyF64		 65 = /dev/cuf65	Callout device for ttyF65		    ...		127 = /dev/cuf127	Callout device for ttyF127		128 = /dev/cuf128	Callout device for ttyF128		129 = /dev/cuf129	Callout device for ttyF129		    ...		191 = /dev/cuf191	Callout device for ttyF191		192 = /dev/cuf192	Callout device for ttyF192		193 = /dev/cuf193	Callout device for ttyF193		    ...		255 = /dev/cuf255	Callout device for ttyF255    block	Compaq Intelligent Drive Array, first controller		  0 = /dev/ida/c0d0	First logical drive whole disk		 16 = /dev/ida/c0d1	Second logical drive whole disk		    ...		240 = /dev/ida/c0d15	16th logical drive whole disk		Partitions are handled the same way as for Mylex		DAC960 (see major number 48) except that the limit on		partitions is 15. 73 char	Computone IntelliPort II serial card - control devices		  0 = /dev/ip2ipl0	Loadware device for board 0		  1 = /dev/ip2stat0	Status device for board 0		  4 = /dev/ip2ipl1	Loadware device for board 1		  5 = /dev/ip2stat1	Status device for board 1		  8 = /dev/ip2ipl2	Loadware device for board 2		  9 = /dev/ip2stat2	Status device for board 2		 12 = /dev/ip2ipl3	Loadware device for board 3		 13 = /dev/ip2stat3	Status device for board 3    block	Compaq Intelligent Drive Array, second controller		  0 = /dev/ida/c1d0	First logical drive whole disk		 16 = /dev/ida/c1d1	Second logical drive whole disk		    ...		240 = /dev/ida/c1d15	16th logical drive whole disk		Partitions are handled the same way as for Mylex		DAC960 (see major number 48) except that the limit on		partitions is 15. 74 char	SCI bridge		  0 = /dev/SCI/0	SCI device 0		  1 = /dev/SCI/1	SCI device 1		    ...		Currently for Dolphin Interconnect Solutions' PCI-SCI		bridge.    block	Compaq Intelligent Drive Array, third controller		  0 = /dev/ida/c2d0	First logical drive whole disk		 16 = /dev/ida/c2d1	Second logical drive whole disk		    ...		240 = /dev/ida/c2d15	16th logical drive whole disk		Partitions are handled the same way as for Mylex		DAC960 (see major number 48) except that the limit on		partitions is 15. 75 char	Specialix IO8+ serial card		  0 = /dev/ttyW0	First IO8+ port, first card		  1 = /dev/ttyW1	Second IO8+ port, first card		    ...		  8 = /dev/ttyW8	First IO8+ port, second card		    ...    block	Compaq Intelligent Drive Array, fourth controller		  0 = /dev/ida/c3d0	First logical drive whole disk		 16 = /dev/ida/c3d1	Second logical drive whole disk		    ...		240 = /dev/ida/c3d15	16th logical drive whole disk		Partitions are handled the same way as for Mylex		DAC960 (see major number 48) except that the limit on		partitions is 15. 76 char	Specialix IO8+ serial card - alternate devices		  0 = /dev/cuw0		Callout device for ttyW0		  1 = /dev/cuw1		Callout device for ttyW1		    ...		  8 = /dev/cuw8		Callout device for ttyW8		    ...    block	Compaq Intelligent Drive Array, fifth controller		  0 = /dev/ida/c4d0	First logical drive whole disk		 16 = /dev/ida/c4d1	Second logical drive whole disk		    ...		240 = /dev/ida/c4d15	16th logical drive whole disk		Partitions are handled the same way as for Mylex		DAC960 (see major number 48) except that the limit on		partitions is 15. 77 char	ComScire Quantum Noise Generator		  0 = /dev/qng		ComScire Quantum Noise Generator    block	Compaq Intelligent Drive Array, sixth controller		  0 = /dev/ida/c5d0	First logical drive whole disk		 16 = /dev/ida/c5d1	Second logical drive whole disk		    ...		240 = /dev/ida/c5d15	16th logical drive whole disk		Partitions are handled the same way as for Mylex		DAC960 (see major number 48) except that the limit on		partitions is 15. 78 char	PAM Software's multimodem boards		  0 = /dev/ttyM0	First PAM modem		  1 = /dev/ttyM1	Second PAM modem		    ...    block	Compaq Intelligent Drive Array, seventh controller		  0 = /dev/ida/c6d0	First logical drive whole disk		 16 = /dev/ida/c6d1	Second logical drive whole disk		    ...		240 = /dev/ida/c6d15	16th logical drive whole disk		Partitions are handled the same way as for Mylex		DAC960 (see major number 48) except that the limit on		partitions is 15. 79 char	PAM Software's multimodem boards - alternate devices		  0 = /dev/cum0		Callout device for ttyM0		  1 = /dev/cum1		Callout device for ttyM1		    ...    block	Compaq Intelligent Drive Array, eigth controller		  0 = /dev/ida/c7d0	First logical drive whole disk		 16 = /dev/ida/c7d1	Second logical drive whole disk		    ...		240 = /dev/ida/c715	16th logical drive whole disk		Partitions are handled the same way as for Mylex		DAC960 (see major number 48) except that the limit on		partitions is 15. 80 char	Photometrics AT200 CCD camera		  0 = /dev/at200	Photometrics AT200 CCD camera    block	I2O hard disk		  0 = /dev/i2o/hda	First I2O hard disk, whole disk		 16 = /dev/i2o/hdb	Second I2O hard disk, whole disk		    ...		240 = /dev/i2o/hdp	16th I2O hard disk, whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15. 81 char	video4linux		  0 = /dev/video0	Video capture/overlay device		    ...		 63 = /dev/video63	Video capture/overlay device		 64 = /dev/radio0	Radio device		    ...		127 = /dev/radio63	Radio device		192 = /dev/vtx0		Teletext device		    ...		223 = /dev/vtx31	Teletext device		224 = /dev/vbi0		Vertical blank interrupt		    ...		255 = /dev/vbi31	Vertical blank interrupt    block	I2O hard disk		  0 = /dev/i2o/hdq	17th I2O hard disk, whole disk		 16 = /dev/i2o/hdr	18th I2O hard disk, whole disk		    ...		240 = /dev/i2o/hdaf	32nd I2O hard disk, whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15. 82 char	WiNRADiO communications receiver card		  0 = /dev/winradio0	First WiNRADiO card		  1 = /dev/winradio1	Second WiNRADiO card		    ...		The driver and documentation may be obtained from		http://www.proximity.com.au/~brian/winradio/    block	I2O hard disk		  0 = /dev/i2o/hdag	33rd I2O hard disk, whole disk		 16 = /dev/i2o/hdah	34th I2O hard disk, whole disk		    ...		240 = /dev/i2o/hdav	48th I2O hard disk, whole disk		Partitions are handled in the same way as for IDE		disks (see major number 3) except that the limit on		partitions is 15.