NSCRTV-HFCEMS-UPSTREAMOPTICALRECEIVER-MIB DEFINITIONS::=BEGIN
   IMPORTS
      OBJECT-TYPE       
         FROM RFC-1212
      DisplayString 
         FROM RFC1213-MIB
      uporIdent
         FROM NSCRTV-ROOT
;

uporVendorOID OBJECT-TYPE 
   SYNTAX OBJECT IDENTIFIER
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"此對象提供廠商對上行光接收機MIB的擴充，無擴充時此對象應指向上行光接收機節點
uporIdent。"
   ::={ uporIdent 1 }

uporSlotNumber OBJECT-TYPE 
   SYNTAX INTEGER ( 0..32767 )
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
"上行光接收機數量或機架插槽數量。"
   ::={ uporIdent 2 }
 
uporDeviceTable OBJECT-TYPE
   SYNTAX SEQUENCE OF UporDeviceEntry
   ACCESS not-accessible
   STATUS mandatory 
   DESCRIPTION
"上行光接收機信息表。"
   ::={ uporIdent 3 }

uporDeviceEntry OBJECT-TYPE 
   SYNTAX UporDeviceEntry
   ACCESS not-accessible
   STATUS mandatory 
   DESCRIPTION
"上行光接收機信息表目。"
   INDEX { uporIndex }
   ::={ uporDeviceTable 1 }

UporDeviceEntry::=
   SEQUENCE 
  {
      uporIndex
         INTEGER,
      uporOpicalInputPower
         INTEGER,
      uporOutputRFAttenuationArea
         INTEGER,
      uporOutputRFAttenuation
         INTEGER,
      uporAGControl
         INTEGER
   }

uporIndex OBJECT-TYPE 
   SYNTAX INTEGER ( 0..32767 )
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"光接收機索引。"
   ::={ uporDeviceEntry 1 }

uporOpicalInputPower OBJECT-TYPE 
   SYNTAX INTEGER ( -32768..32767 )
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"輸入光功率,單位為0.1dBm。此對象要求在屬性MIB中登記一個條目。"
   ::={ uporDeviceEntry 2 }

uporOutputRFAttenuationArea OBJECT-TYPE 
   SYNTAX INTEGER ( 0..127 )
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"最大輸出射頻衰減量,單位為dB。"
   ::={ uporDeviceEntry 3 }

uporOutputRFAttenuation OBJECT-TYPE 
   SYNTAX INTEGER ( 0..127 )
   ACCESS read-write
   STATUS optional
   DESCRIPTION
"輸出射頻信號衰減量,單位為dB。"
   ::={ uporDeviceEntry 4 }

uporAGControl OBJECT-TYPE 
   SYNTAX INTEGER { off(1),on(2) }
   ACCESS read-write
   STATUS optional
   DESCRIPTION
"AGC控制使能。"
   ::={ uporDeviceEntry 5 }

uporNumberDCPowerSupply OBJECT-TYPE 
   SYNTAX INTEGER ( 0..16 )
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"直流電源數量，‘0’表示應答器不支持此功能"
   ::={ uporIdent 4 }

uporDCPowerSupplyMode OBJECT-TYPE 
   SYNTAX INTEGER { loadsharing(1),switchedRedundant(2),aloneSupply(3) }
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"供電電源工作模式。"
   ::={ uporIdent 5 }

uporDCPowerTable OBJECT-TYPE
   SYNTAX SEQUENCE OF UporDCPowerEntry
   ACCESS not-accessible
   STATUS mandatory
   DESCRIPTION
"直流電源信息表。"
   ::={ uporIdent 6 }

uporDCPowerEntry OBJECT-TYPE
   SYNTAX UporDCPowerEntry
   ACCESS not-accessible
   STATUS mandatory
   DESCRIPTION
"直流電源信息表目。"
   INDEX { uporDCPowerIndex }
   ::={ uporDCPowerTable 1 }

UporDCPowerEntry::=
   SEQUENCE
   {
      uporDCPowerIndex
         INTEGER,
      uporDCPowerVoltage
         INTEGER,
      uporDCPowerCurrent
         INTEGER,
      uporDCPowerName
         DisplayString
   }

uporDCPowerIndex OBJECT-TYPE
   SYNTAX INTEGER 
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"直流電源索引。"
   ::={ uporDCPowerEntry 1 }

uporDCPowerVoltage OBJECT-TYPE
   SYNTAX INTEGER (-32768..32767)
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"電源電壓，單位為0.1V。此對象要求在屬性MIB中登記一個條目。"
   ::={ uporDCPowerEntry 2 }

uporDCPowerCurrent OBJECT-TYPE
   SYNTAX INTEGER (0..65535)
   ACCESS read-only
   STATUS optional
   DESCRIPTION
"電源的電流，單位為0.1A。此對象要求在屬性MIB中登記一個條目。"
   ::={ uporDCPowerEntry 3 }

uporDCPowerName OBJECT-TYPE
   SYNTAX DisplayString
   ACCESS read-only
   STATUS mandatory
   DESCRIPTION
"標明電源的名稱，例如：24V直流電源。
此字段值由用戶規定，至少應標明工作電壓并將多個電源相互區分開。
當表中的對象產生告警時，此對象名稱應放進hfcAlarmEvent陷阱的alarmText對象里（見
附錄D）。"
   ::={ uporDCPowerEntry 4 }


END