?? 30dl.c
字號:
/*
2007.10.9
*/
#include <30dl.h>
#include <ystddef.h>
#include <io87.h>
#include <io87bit.h>
/*+++++++++++++++++++++++++++++++++++++++++++++++++*/
extern void main(),hdwinit();
extern void inttbt(),inttc3(),inttc4(),onlyreti(),onlyretn();
extern void remo_init(),r_shift();
extern void ad_sub(),ad_process();
extern void remo_decode();
extern void remo_decode_sub();
extern void output();
extern void mode_sub(),coolmode(),drymode(),heatmode(),is_mode_change();
extern void comp_dly_5s(),outfan_dly_15s(),ice_prv();
extern void heat_defrost_run(),heat_normal_run();
extern void comp_dly_5s_h(),press_protect();
extern void comptime();
extern void fancontrol();
extern void coolfan(),dryfan(),heatfan();
extern void setfanOFF(),setfanHi(),setfanMi(),setfanLo(),h_fan_normal();
extern void timer_sub();
extern void vancontrol(),stepdrive(),vane_monitor();
extern void comp_cumulate_sub(); /*count for defrost and vane dew*/
extern void abnormal_show(),sh_abnor_mid();
extern void emergency_timer(),read_key_emerg();
extern void sleepmode();
extern void fctest(),fc_test_output(),on_line_test();
extern void timer_cnt_sub();
extern void emergency_run();
extern void auto_start(),heat_stop();
extern unsigned char read_port_P1();
extern unsigned char read_port_P4();
/*+++++++++++++++++++++++++++++++++++++++++++++++++*/
#pragma section area _variable tiny 0x0060
unsigned char flag1,flag2,flag3,flag4,flag5,flag6,flag7;
unsigned char flag8,flag9,flag10,fan_st,timer_st;
unsigned char ram2;
unsigned char dig_tmp1,dig_tmp2,dig_tmp_mid,regA,regB;
unsigned char tempa,tempb,remo_step,t10ms_cnt,t60s_cnt,mode_change_cnt;
unsigned char run_time_cnt;
unsigned char remo_bit_cnt,remo_byte_cnt,shift_temp,remo_sum;
unsigned char remo_data[14],remo_data_receive[14];
unsigned char ram1;
unsigned char ad_room;
unsigned char ad_coil;
unsigned char roomtemp,settemp;
unsigned char adnum;
unsigned char ad_channel;
unsigned char mode,runmode,remo_fanspeed,vane_mode,oldrunmode;
unsigned char yufang_105m_time,fan_run_word;
unsigned char outfan_d5s,first_mode_change;
unsigned char defrost_step,c_cumulate_time;
unsigned char guoyali_time;
unsigned char comp_time_cnt,dtram,comprunT;
unsigned char fantime,first_remo;
unsigned char T_on_m,T_off_m,timer10min;
unsigned char motor_step,stop30s_cnt;
unsigned char v_object_cnt;
unsigned char ram3;
unsigned char v_swing_dly;
unsigned char v_swing_cnt;
unsigned char dew_prv_time;
unsigned char v_position_cnt,v_angle_cnt;
unsigned char mode_angle_mode,van_tmp;
unsigned char motor_cnt,delay_cnt;
unsigned char defrost_cnt,defrost_interval_t;
unsigned char err_cnt,ming_mie;
unsigned char emergency_test_time,emergency_key_cnt;
unsigned char key_cnt;
unsigned char sleeptime;
unsigned char sys_ram_P1;
unsigned char fc_pulse_cnt,fc_time,on_line_test_pass;
unsigned char shift_1,shift_2;
unsigned char ram4;
unsigned char tc1_watch,timer_cnt,no_short_time;
unsigned int buztime,adHLram,defrost_time,defrost_time_cnt;
unsigned int coil4c_time;
/*+++++++++++++++++++++++++++++++++++++++++++++++++*/
#pragma section code table near 0xe000
unsigned char ad_tab[]=
{
12,12,13,13,13,14,14,14,15,15, /*90d-99d*/
15,16,16,16,17,17,17,18,18,18, /*100d-109d*/
19,19,19,20,20,20,21,21,22,22, /*110d-119d*/
22,23,23,23,24,24,24,25,25,25, /*120d-129d*/
26,26,26,27,27,28,28,28,29,29, /*130d-139d*/
29,30,30,30,31,31,32,32,32,33, /*140d-149d*/
}; /* range 90-150*/
unsigned char tab_step[]=
{
0y10010001,
0y10000011,
0y11000010,
0y01000110,
0y01100100,
0y00101100,
0y00111000,
0y00011001
};
/*-------------------------------------*/
void main()
{
RBS = 0;
EIR = 0;
SP = STACK_BOTTOM; /* Stack pointer set */
WDTCR1 = 0y00001111;
WDTCR2 = 0x4e;
hdwinit();
if (ram1!=0xaa || ram2!=0xaa || ram3!=0xaa || ram4!=0xaa)
{
WA = SIZE;
HL = RAM_TOP;
do {
*HL++ = 0;
} while(--WA);
ram1=0xaa;
ram2=0xaa;
ram3=0xaa;
ram4=0xaa;
sys_ram_P1 = read_port_P1() ^ 0y00001111;
autostart = JPA;
}
shift_1 = 0y00001000;
shift_2 = 0y00000100;
TBTCR = 0y00001110; /* 0.256ms every interrupt */
EIR = 0y0000010101000001;
remo_step=0;
TC3CR = 0y01000101;
NOP();
NOP();
TC3CR = 0y00010101;
ADCCR = 0y01000000;
if (!read_port_P4().2 && JPT)
{
fctest();
}
IOP5.1 = 1;
for (;;)
{
/*
if ((fc_time < 20) && on_line_1s)
{
on_line_1s=0;
fc_time+=1;
if ((on_line_test_pass==0) && line_testing)
{
line_testing=0;
on_line_test();
on_line_test_pass=0x0f;
}
}
*/
if (tc1_watch!=100)
{
tc1_watch=100;
WDTCR2 = 0x4e;
}
if (TREG3A >=250 || TREG3B >= 250 )
{
TC3CR = 0y00000101;
TC3CR = 0y00010101;
remo_step = 0;
EIRH.0 = 1;
}
timer_cnt_sub();
if (van_ctrl_flg)
{
van_ctrl_flg = OFF;
vancontrol();
}
if (autostart1s)
{
autostart = 1;
autostart1s = 0;
auto_start();
}
ad_sub();
remo_decode();
output();
mode_sub();
comptime();
timer_sub();
vane_monitor();
emergency_timer();
sleepmode();
read_key_emerg();
emergency_run();
}
}
/*-------------------------------------*/
void hdwinit()
{
SYSCR1 = 0x00;
SYSCR2 = 0x80;
TREG4 = 0x08; /* 4096Hz */
IL = 0; /* Clear interrupt latch */
P1CR = 0y11111000;
P5CR = 0y00000010;
P6CR = 0y11111100;
TBTCR = 0y00000110; /* 0.256ms every interrupt */
TC3CR = 0y00000101;
EINTCR.3 = 1; /* INT3ES = 1 */
TC3CR = 0y00010101;
CLZCR = 0x07;
SELREF = 0x00;
return;
}
/*-------------------------------------*/
void auto_start()
{
power=1;
mode=cool;
settemp=24;
remo_fanspeed=3;
vane_mode=angle_1;
TC4CR = 0y00010110;
return;
}
/*-------------------------------------*/
void emergency_run()
{
if (emergency_test)
{
if ((!abnormal) && power && (!defrost))
{
setfanHi();
}
else
{
setfanOFF();
}
}
else
{
fancontrol();
}
return;
}
/*-------------------------------------*/
void timer_cnt_sub()
{
if (bit_1s)
{
bit_1s = 0;
tc1_watch-=1;
run_time_cnt = 2;
if (read_port_P4().3)
{
run_time_cnt = 100;
}
van_ctrl_flg = ON;
if (++err_cnt >= 25)
{
err_cnt = 0;
sh_error_1s = 1;
}
if (++no_short_time>=100)
{
no_short_time = 0;
on_line_1s = 1;
port1s=1;
if (!autostart)
{
autostart1s = 1;
}
}
if (++t10ms_cnt>=run_time_cnt)
{
t10ms_cnt = 0;
outfan1s = 1;
delay1s = 1;
t60s_cnt+=1;
defrost_1s = 1;
fantime1s = 1;
coil4c_1m = ON;
guoyali_1s = 1;
remo_mornitor = 1;
stop1s = 1;
}
if (t60s_cnt>=60)
{
t60s_cnt = 0;
yufang_c_1m = ON;
timer1m = ON;
c_c_t_1m = ON;
dew_prv_1m = ON;
emergency_1m = ON;
sleep_1m = ON;
}
if (++mode_change_cnt>=run_time_cnt+10)
{
mode_change_cnt = 0;
mode_bak = 0;
}
}
return;
}
/*-------------------------------------*/
void remo_init()
{
remo_step = 0;
for (tempa=0;tempa<14;tempa+=1)
{
remo_data_receive[tempa]=0;
}
EIRH.0 = 1; /* Enable INT3,TC1 */
return;
}
/*-------------------------------------*/
void r_shift()
{
remo_data_receive[remo_byte_cnt]=remo_data_receive[remo_byte_cnt]>>1;
remo_data_receive[remo_byte_cnt]=shift_temp | remo_data_receive[remo_byte_cnt];
return;
}
/*-------------------------------------*/
void ad_sub()
{
if (ADCCR.7==1)
{
if (++adnum==0)
{
regA = 0;
if ((adHLram & 0x00ff) >= 0x80)
{
regA = 1;
}
regB = adHLram >> 8;
adHLram = 0;
if (ad_channel==0)
{
ad_room = regA + regB;
ad_channel=0x01;
ADCCR = 0y01000001;
}
else
{
ad_coil = regA + regB;
ad_channel=0x00;
ADCCR = 0y01000000;
ad_process();
}
}
else
{
adHLram+=ADCDRL;
}
}
ADCCR.6=1;
return;
}
/*-------------------------------------*/
void ad_process()
{
if (power)
{
if ((ad_room<0x05) || (ad_room>0xfb))
{
abnormal=1;
roomtemp_err=1;
}
else
{
roomtemp_err=0;
if (!coil_err)
{
abnormal=0;
}
}
if ((ad_coil<0x05) || (ad_coil>0xfb))
{
abnormal=1;
coil_err=1;
}
else
{
coil_err=0;
if (!roomtemp_err)
{
abnormal=0;
}
}
if (!abnormal && !defrost)
{
if (ad_coil>picoil34)
{
defrost_time_cnt=60;
}
else
{
defrost_time_cnt=480;
}
}
if (!abnormal)
{
if (ad_room<=90)
{
roomtemp=12;
}
else
{
if (ad_room>=149)
{
roomtemp=33;
}
else
{
roomtemp=ad_tab[ad_room-90];
}
}
if (emergency_test)
{
TCB = 1;
}
else
{
if (runmode==heat)
{
roomtemp -= 2;
if (settemp > roomtemp)
{
TCB=1;
}
else
{
if (settemp < roomtemp)
{
TCB=0;
}
}
}
else
{
if (settemp > roomtemp)
{
TCB=0;
}
else
{
if (settemp < roomtemp)
{
TCB=1;
}
}
}
}
}
else
{
TCB = 0;
}
}
else
{
TCB = 0;
}
if (mode==dry || mode==fan)
{
TCB=0;
}
return;
}
/*-------------------------------------*/
void remo_decode()
{
if (flg_remo_ok == ON)
{
remo_test = 1;
flg_remo_ok = OFF;
tempa = remo_data[6] & 0y00001111;/*run mode*/
if (tempa != auto)/*自動運行不用解碼*/
{
if (cool_only)/*是否單冷機*/
{
if (tempa != heat)
{
remo_decode_sub();
}
}
else
{
remo_decode_sub();
}
}
}
return;
}
/*-------------------------------------*/
void remo_decode_sub()
{
/*
if ((on_line_test_pass==0) && (fc_time < 20) && ((remo_data[5]&0x03)==3))
{
line_testing=1;
TC4CR = 0y00010110;
}
else
{
on_line_test_pass=0x0f;
*/
tempa = remo_data[5];
power = tempa.2;
TC4CR = 0y00010110;
tempa = tempa & 0y00011000;
if (tempa == 0x08)
{
timer_st = TIME_ON_OFF;
}
else
{
if (tempa == 0x10)
{
timer_st = TIME_ON_ON;
power = OFF;
}
else
{
if (tempa == 0x00)
{
timer_st = TIME_OFF;
}
else
{
timer = time_on = time_off = ON;
if (remo_data[9] > remo_data[10])
{
power = OFF;
}
else
{
power = ON;
}
}
}
}
T_off_m = remo_data[9];
T_on_m = remo_data[10];
mode = remo_data[6] & 0y00001111; /* run mode */
if ((mode == cool) || (mode == heat))
{
settemp = remo_data[7] ^ 0y11111111;
settemp = settemp & 0y00001111;
settemp = settemp + 16;
}
remo_fanspeed = remo_data[8] & 0y00000111 ; /* d2d1d0 fan speed */
tempa = remo_data[8] & 0y00111000;
tempa = tempa >> 3;
if (vane_mode == angle_swing)/*當搖擺功能被取消時重新定位*/
{
if (tempa != angle_swing)
{
position_ok = OFF;
}
}
vane_mode = tempa;
dew_prv = 0;
tempa = remo_data[11];
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -